X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/d4ca7fb44c7d326b96cf391f0275dc323dbe24de..a9abe1fdea5ccf67aaccab6fdde300d6fcf2d15a:/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c index def34991f..ede236280 100644 --- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c +++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c @@ -1,416 +1,212 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2009. - - dean [at] fourwalledcubicle [dot] com - www.fourwalledcubicle.com -*/ - -/* - Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Target-related functions for the PDI Protocol decoder. - */ - -#define INCLUDE_FROM_XPROGTARGET_C -#include "XPROGTarget.h" - -#if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__) - -/** Flag to indicate if the USART is currently in Tx or Rx mode. */ -volatile bool IsSending; - -#if !defined(XPROG_VIA_HARDWARE_USART) -/** Software USART raw frame bits for transmission/reception. */ -volatile uint16_t SoftUSART_Data; - -/** Bits remaining to be sent or received via the software USART - set as a GPIOR for speed. */ -#define SoftUSART_BitCount GPIOR2 - - -/** ISR to manage the PDI software USART when bit-banged PDI USART mode is selected. */ -ISR(TIMER1_COMPA_vect, ISR_BLOCK) -{ - /* Toggle CLOCK pin in a single cycle (see AVR datasheet) */ - BITBANG_PDICLOCK_PIN |= BITBANG_PDICLOCK_MASK; - - /* If not sending or receiving, just exit */ - if (!(SoftUSART_BitCount)) - return; - - /* Check to see if we are at a rising or falling edge of the clock */ - if (BITBANG_PDICLOCK_PORT & BITBANG_PDICLOCK_MASK) - { - /* If at rising clock edge and we are in send mode, abort */ - if (IsSending) - return; - - /* Wait for the start bit when receiving */ - if ((SoftUSART_BitCount == BITS_IN_USART_FRAME) && (BITBANG_PDIDATA_PIN & BITBANG_PDIDATA_MASK)) - return; - - /* Shift in the bit one less than the frame size in position, so that the start bit will eventually - * be discarded leaving the data to be byte-aligned for quick access */ - if (BITBANG_PDIDATA_PIN & BITBANG_PDIDATA_MASK) - ((uint8_t*)&SoftUSART_Data)[1] |= (1 << (BITS_IN_USART_FRAME - 9)); - - SoftUSART_Data >>= 1; - SoftUSART_BitCount--; - } - else - { - /* If at falling clock edge and we are in receive mode, abort */ - if (!IsSending) - return; - - /* Set the data line to the next bit value */ - if (((uint8_t*)&SoftUSART_Data)[0] & 0x01) - BITBANG_PDIDATA_PORT |= BITBANG_PDIDATA_MASK; - else - BITBANG_PDIDATA_PORT &= ~BITBANG_PDIDATA_MASK; - - SoftUSART_Data >>= 1; - SoftUSART_BitCount--; - } -} - -/** ISR to manage the TPI software USART when bit-banged TPI USART mode is selected. */ -ISR(TIMER1_COMPB_vect, ISR_BLOCK) -{ - /* Toggle CLOCK pin in a single cycle (see AVR datasheet) */ - BITBANG_TPICLOCK_PIN |= BITBANG_TPICLOCK_MASK; - - /* If not sending or receiving, just exit */ - if (!(SoftUSART_BitCount)) - return; - - /* Check to see if we are at a rising or falling edge of the clock */ - if (BITBANG_TPICLOCK_PORT & BITBANG_TPICLOCK_MASK) - { - /* If at rising clock edge and we are in send mode, abort */ - if (IsSending) - return; - - /* Wait for the start bit when receiving */ - if ((SoftUSART_BitCount == BITS_IN_USART_FRAME) && (BITBANG_TPIDATA_PIN & BITBANG_TPIDATA_MASK)) - return; - - /* Shift in the bit one less than the frame size in position, so that the start bit will eventually - * be discarded leaving the data to be byte-aligned for quick access */ - if (BITBANG_TPIDATA_PIN & BITBANG_TPIDATA_MASK) - ((uint8_t*)&SoftUSART_Data)[1] |= (1 << (BITS_IN_USART_FRAME - 9)); - - SoftUSART_Data >>= 1; - SoftUSART_BitCount--; - } - else - { - /* If at falling clock edge and we are in receive mode, abort */ - if (!IsSending) - return; - - /* Set the data line to the next bit value */ - if (((uint8_t*)&SoftUSART_Data)[0] & 0x01) - BITBANG_TPIDATA_PORT |= BITBANG_TPIDATA_MASK; - else - BITBANG_TPIDATA_PORT &= ~BITBANG_TPIDATA_MASK; - - SoftUSART_Data >>= 1; - SoftUSART_BitCount--; - } -} -#endif - -/** Enables the target's PDI interface, holding the target in reset until PDI mode is exited. */ -void XPROGTarget_EnableTargetPDI(void) -{ - IsSending = false; - -#if defined(XPROG_VIA_HARDWARE_USART) - /* Set Tx and XCK as outputs, Rx as input */ - DDRD |= (1 << 5) | (1 << 3); - DDRD &= ~(1 << 2); - - /* Set DATA line high for at least 90ns to disable /RESET functionality */ - PORTD |= (1 << 3); - asm volatile ("NOP"::); - asm volatile ("NOP"::); - - /* Set up the synchronous USART for XMEGA communications - - 8 data bits, even parity, 2 stop bits */ - UBRR1 = (F_CPU / 1000000UL); - UCSR1B = (1 << TXEN1); - UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1); -#else - /* Set DATA and CLOCK lines to outputs */ - BITBANG_PDIDATA_DDR |= BITBANG_PDIDATA_MASK; - BITBANG_PDICLOCK_DDR |= BITBANG_PDICLOCK_MASK; - - /* Set DATA line high for at least 90ns to disable /RESET functionality */ - BITBANG_PDIDATA_PORT |= BITBANG_PDIDATA_MASK; - asm volatile ("NOP"::); - asm volatile ("NOP"::); - - /* Fire timer compare channel A ISR to manage the software USART */ - OCR1A = BITS_BETWEEN_USART_CLOCKS; - TCCR1B = (1 << WGM12) | (1 << CS10); - TIMSK1 = (1 << OCIE1A); -#endif - - /* Send two BREAKs of 12 bits each to enable PDI interface (need at least 16 idle bits) */ - XPROGTarget_SendBreak(); - XPROGTarget_SendBreak(); -} - -/** Enables the target's TPI interface, holding the target in reset until TPI mode is exited. */ -void XPROGTarget_EnableTargetTPI(void) -{ - IsSending = false; - - /* Set /RESET line low for at least 90ns to enable TPI functionality */ - RESET_LINE_DDR |= RESET_LINE_MASK; - RESET_LINE_PORT &= ~RESET_LINE_MASK; - asm volatile ("NOP"::); - asm volatile ("NOP"::); - -#if defined(XPROG_VIA_HARDWARE_USART) - /* Set Tx and XCK as outputs, Rx as input */ - DDRD |= (1 << 5) | (1 << 3); - DDRD &= ~(1 << 2); - - /* Set up the synchronous USART for XMEGA communications - - 8 data bits, even parity, 2 stop bits */ - UBRR1 = (F_CPU / 1000000UL); - UCSR1B = (1 << TXEN1); - UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1); -#else - /* Set DATA and CLOCK lines to outputs */ - BITBANG_TPIDATA_DDR |= BITBANG_TPIDATA_MASK; - BITBANG_TPICLOCK_DDR |= BITBANG_TPICLOCK_MASK; - - /* Set DATA line high for idle state */ - BITBANG_TPIDATA_PORT |= BITBANG_TPIDATA_MASK; - - /* Fire timer capture channel B ISR to manage the software USART */ - OCR1B = BITS_BETWEEN_USART_CLOCKS; - TCCR1B = (1 << WGM12) | (1 << CS10); - TIMSK1 = (1 << OCIE1B); -#endif - - /* Send two BREAKs of 12 bits each to enable TPI interface (need at least 16 idle bits) */ - XPROGTarget_SendBreak(); - XPROGTarget_SendBreak(); -} - -/** Disables the target's PDI interface, exits programming mode and starts the target's application. */ -void XPROGTarget_DisableTargetPDI(void) -{ -#if defined(XPROG_VIA_HARDWARE_USART) - /* Turn off receiver and transmitter of the USART, clear settings */ - UCSR1A |= (1 << TXC1) | (1 << RXC1); - UCSR1B = 0; - UCSR1C = 0; - - /* Set all USART lines as input, tristate */ - DDRD &= ~((1 << 5) | (1 << 3)); - PORTD &= ~((1 << 5) | (1 << 3) | (1 << 2)); -#else - /* Set DATA and CLOCK lines to inputs */ - BITBANG_PDIDATA_DDR &= ~BITBANG_PDIDATA_MASK; - BITBANG_PDICLOCK_DDR &= ~BITBANG_PDICLOCK_MASK; - - /* Tristate DATA and CLOCK lines */ - BITBANG_PDIDATA_PORT &= ~BITBANG_PDIDATA_MASK; - BITBANG_PDICLOCK_PORT &= ~BITBANG_PDICLOCK_MASK; -#endif -} - -/** Disables the target's TPI interface, exits programming mode and starts the target's application. */ -void XPROGTarget_DisableTargetTPI(void) -{ -#if defined(XPROG_VIA_HARDWARE_USART) - /* Turn off receiver and transmitter of the USART, clear settings */ - UCSR1A |= (1 << TXC1) | (1 << RXC1); - UCSR1B = 0; - UCSR1C = 0; - - /* Set all USART lines as input, tristate */ - DDRD &= ~((1 << 5) | (1 << 3)); - PORTD &= ~((1 << 5) | (1 << 3) | (1 << 2)); -#else - /* Set DATA and CLOCK lines to inputs */ - BITBANG_TPIDATA_DDR &= ~BITBANG_TPIDATA_MASK; - BITBANG_TPICLOCK_DDR &= ~BITBANG_TPICLOCK_MASK; - - /* Tristate DATA and CLOCK lines */ - BITBANG_TPIDATA_PORT &= ~BITBANG_TPIDATA_MASK; - BITBANG_TPICLOCK_PORT &= ~BITBANG_TPICLOCK_MASK; -#endif - - /* Tristate target /RESET line */ - RESET_LINE_DDR &= ~RESET_LINE_MASK; - RESET_LINE_PORT &= ~RESET_LINE_MASK; -} - -/** Sends a byte via the USART. - * - * \param[in] Byte Byte to send through the USART - */ -void XPROGTarget_SendByte(const uint8_t Byte) -{ -#if defined(XPROG_VIA_HARDWARE_USART) - /* Switch to Tx mode if currently in Rx mode */ - if (!(IsSending)) - { - PORTD |= (1 << 3); - DDRD |= (1 << 3); - - UCSR1B |= (1 << TXEN1); - UCSR1B &= ~(1 << RXEN1); - - IsSending = true; - } - - /* Wait until there is space in the hardware Tx buffer before writing */ - while (!(UCSR1A & (1 << UDRE1))); - UCSR1A |= (1 << TXC1); - UDR1 = Byte; -#else - /* Switch to Tx mode if currently in Rx mode */ - if (!(IsSending)) - { - BITBANG_PDIDATA_PORT |= BITBANG_PDIDATA_MASK; - BITBANG_PDIDATA_DDR |= BITBANG_PDIDATA_MASK; - - IsSending = true; - } - - /* Calculate the new USART frame data here while while we wait for a previous byte (if any) to finish sending */ - uint16_t NewUSARTData = ((1 << 11) | (1 << 10) | (0 << 9) | ((uint16_t)Byte << 1) | (0 << 0)); - - /* Compute Even parity - while a bit is still set, chop off lowest bit and toggle parity bit */ - uint8_t ParityData = Byte; - while (ParityData) - { - NewUSARTData ^= (1 << 9); - ParityData &= (ParityData - 1); - } - - /* Wait until transmitter is idle before writing new data */ - while (SoftUSART_BitCount); - - /* Data shifted out LSB first, START DATA PARITY STOP STOP */ - SoftUSART_Data = NewUSARTData; - SoftUSART_BitCount = BITS_IN_USART_FRAME; -#endif -} - -/** Receives a byte via the software USART, blocking until data is received. - * - * \return Received byte from the USART - */ -uint8_t XPROGTarget_ReceiveByte(void) -{ -#if defined(XPROG_VIA_HARDWARE_USART) - /* Switch to Rx mode if currently in Tx mode */ - if (IsSending) - { - while (!(UCSR1A & (1 << TXC1))); - UCSR1A |= (1 << TXC1); - - UCSR1B &= ~(1 << TXEN1); - UCSR1B |= (1 << RXEN1); - - DDRD &= ~(1 << 3); - PORTD &= ~(1 << 3); - - IsSending = false; - } - - /* Wait until a byte has been received before reading */ - while (!(UCSR1A & (1 << RXC1)) && TimeoutMSRemaining); - return UDR1; -#else - /* Switch to Rx mode if currently in Tx mode */ - if (IsSending) - { - while (SoftUSART_BitCount); - - BITBANG_PDIDATA_DDR &= ~BITBANG_PDIDATA_MASK; - BITBANG_PDIDATA_PORT &= ~BITBANG_PDIDATA_MASK; - - IsSending = false; - } - - /* Wait until a byte has been received before reading */ - SoftUSART_BitCount = BITS_IN_USART_FRAME; - while (SoftUSART_BitCount && TimeoutMSRemaining); - - /* Throw away the parity and stop bits to leave only the data (start bit is already discarded) */ - return (uint8_t)SoftUSART_Data; -#endif -} - -/** Sends a BREAK via the USART to the attached target, consisting of a full frame of idle bits. */ -void XPROGTarget_SendBreak(void) -{ -#if defined(XPROG_VIA_HARDWARE_USART) - /* Switch to Tx mode if currently in Rx mode */ - if (!(IsSending)) - { - PORTD |= (1 << 3); - DDRD |= (1 << 3); - - UCSR1B &= ~(1 << RXEN1); - UCSR1B |= (1 << TXEN1); - - IsSending = true; - } - - /* Need to do nothing for a full frame to send a BREAK */ - for (uint8_t i = 0; i < BITS_IN_USART_FRAME; i++) - { - /* Wait for a full cycle of the clock */ - while (PIND & (1 << 5)); - while (!(PIND & (1 << 5))); - } -#else - /* Switch to Tx mode if currently in Rx mode */ - if (!(IsSending)) - { - BITBANG_PDIDATA_PORT |= BITBANG_PDIDATA_MASK; - BITBANG_PDIDATA_DDR |= BITBANG_PDIDATA_MASK; - - IsSending = true; - } - - while (SoftUSART_BitCount); - - /* Need to do nothing for a full frame to send a BREAK */ - SoftUSART_Data = 0x0FFF; - SoftUSART_BitCount = BITS_IN_USART_FRAME; -#endif -} - -#endif +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Target-related functions for the PDI Protocol decoder. + */ + +#define INCLUDE_FROM_XPROGTARGET_C +#include "XPROGTarget.h" + +#if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__) + +/** Flag to indicate if the USART is currently in Tx or Rx mode. */ +bool IsSending; + +/** Enables the target's PDI interface, holding the target in reset until PDI mode is exited. */ +void XPROGTarget_EnableTargetPDI(void) +{ + IsSending = false; + + /* Set Tx and XCK as outputs, Rx as input */ + DDRD |= (1 << 5) | (1 << 3); + DDRD &= ~(1 << 2); + + /* Set DATA line high for at least 90ns to disable /RESET functionality */ + PORTD |= (1 << 3); + _delay_us(1); + + /* Set up the synchronous USART for XMEGA communications - 8 data bits, even parity, 2 stop bits */ + UBRR1 = ((F_CPU / 2 / XPROG_HARDWARE_SPEED) - 1); + UCSR1B = (1 << TXEN1); + UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1); + + /* Send two IDLEs of 12 bits each to enable PDI interface (need at least 16 idle bits) */ + XPROGTarget_SendIdle(); + XPROGTarget_SendIdle(); +} + +/** Enables the target's TPI interface, holding the target in reset until TPI mode is exited. */ +void XPROGTarget_EnableTargetTPI(void) +{ + IsSending = false; + + /* Set /RESET line low for at least 400ns to enable TPI functionality */ + AUX_LINE_DDR |= AUX_LINE_MASK; + AUX_LINE_PORT &= ~AUX_LINE_MASK; + _delay_us(1); + + /* Set Tx and XCK as outputs, Rx as input */ + DDRD |= (1 << 5) | (1 << 3); + DDRD &= ~(1 << 2); + + /* Set up the synchronous USART for TINY communications - 8 data bits, even parity, 2 stop bits */ + UBRR1 = ((F_CPU / 2 / XPROG_HARDWARE_SPEED) - 1); + UCSR1B = (1 << TXEN1); + UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1); + + /* Send two IDLEs of 12 bits each to enable TPI interface (need at least 16 idle bits) */ + XPROGTarget_SendIdle(); + XPROGTarget_SendIdle(); +} + +/** Disables the target's PDI interface, exits programming mode and starts the target's application. */ +void XPROGTarget_DisableTargetPDI(void) +{ + /* Switch to Rx mode to ensure that all pending transmissions are complete */ + if (IsSending) + XPROGTarget_SetRxMode(); + + /* Turn off receiver and transmitter of the USART, clear settings */ + UCSR1A = ((1 << TXC1) | (1 << RXC1)); + UCSR1B = 0; + UCSR1C = 0; + + /* Tristate all pins */ + DDRD &= ~((1 << 5) | (1 << 3)); + PORTD &= ~((1 << 5) | (1 << 3) | (1 << 2)); +} + +/** Disables the target's TPI interface, exits programming mode and starts the target's application. */ +void XPROGTarget_DisableTargetTPI(void) +{ + /* Switch to Rx mode to ensure that all pending transmissions are complete */ + if (IsSending) + XPROGTarget_SetRxMode(); + + /* Turn off receiver and transmitter of the USART, clear settings */ + UCSR1A |= (1 << TXC1) | (1 << RXC1); + UCSR1B = 0; + UCSR1C = 0; + + /* Set all USART lines as inputs, tristate */ + DDRD &= ~((1 << 5) | (1 << 3)); + PORTD &= ~((1 << 5) | (1 << 3) | (1 << 2)); + + /* Tristate target /RESET line */ + AUX_LINE_DDR &= ~AUX_LINE_MASK; + AUX_LINE_PORT &= ~AUX_LINE_MASK; +} + +/** Sends a byte via the USART. + * + * \param[in] Byte Byte to send through the USART + */ +void XPROGTarget_SendByte(const uint8_t Byte) +{ + /* Switch to Tx mode if currently in Rx mode */ + if (!(IsSending)) + XPROGTarget_SetTxMode(); + + /* Wait until there is space in the hardware Tx buffer before writing */ + while (!(UCSR1A & (1 << UDRE1))); + UCSR1A |= (1 << TXC1); + UDR1 = Byte; +} + +/** Receives a byte via the hardware USART, blocking until data is received or timeout expired. + * + * \return Received byte from the USART + */ +uint8_t XPROGTarget_ReceiveByte(void) +{ + /* Switch to Rx mode if currently in Tx mode */ + if (IsSending) + XPROGTarget_SetRxMode(); + + /* Wait until a byte has been received before reading */ + while (!(UCSR1A & (1 << RXC1)) && !(TimeoutExpired)); + + /* Byte of data received - reset the timeout */ + wdt_reset(); + + return UDR1; +} + +/** Sends an IDLE via the USART to the attached target, consisting of a full frame of idle bits. */ +void XPROGTarget_SendIdle(void) +{ + /* Switch to Tx mode if currently in Rx mode */ + if (!(IsSending)) + XPROGTarget_SetTxMode(); + + /* Need to do nothing for a full frame to send an IDLE */ + for (uint8_t i = 0; i < BITS_IN_USART_FRAME; i++) + { + /* Wait for a full cycle of the clock */ + while (PIND & (1 << 5)); + while (!(PIND & (1 << 5))); + while (PIND & (1 << 5)); + } +} + +static void XPROGTarget_SetTxMode(void) +{ + /* Wait for a full cycle of the clock */ + while (PIND & (1 << 5)); + while (!(PIND & (1 << 5))); + while (PIND & (1 << 5)); + + PORTD |= (1 << 3); + DDRD |= (1 << 3); + + UCSR1B &= ~(1 << RXEN1); + UCSR1B |= (1 << TXEN1); + + IsSending = true; +} + +static void XPROGTarget_SetRxMode(void) +{ + while (!(UCSR1A & (1 << TXC1))); + UCSR1A |= (1 << TXC1); + + UCSR1B &= ~(1 << TXEN1); + UCSR1B |= (1 << RXEN1); + + DDRD &= ~(1 << 3); + PORTD &= ~(1 << 3); + + IsSending = false; +} + +#endif +