X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/d38fa49cb6cb3804c9bb17601688a62ba466b535..e0985b995009d71b80d214a66944e76f4e41aadb:/LUFA/Drivers/USB/HighLevel/USBInterrupt.h

diff --git a/LUFA/Drivers/USB/HighLevel/USBInterrupt.h b/LUFA/Drivers/USB/HighLevel/USBInterrupt.h
index 56297e3d4..9a1604703 100644
--- a/LUFA/Drivers/USB/HighLevel/USBInterrupt.h
+++ b/LUFA/Drivers/USB/HighLevel/USBInterrupt.h
@@ -31,9 +31,9 @@
 /** \ingroup Group_USB
  *  @defgroup Group_USBInterrupt Endpoint and Pipe Interrupts
  *
- *  Main USB interrupt vector handler. This file manages the main USB interrupt vector, for handling such
- *  events as VBUS interrupts (on supported USB AVR models), device connections and disconnections, etc.
- *  as well as providing easy to use macros for the management of the Endpoint/Pipe interrupt vector.
+ *  This module manages the main USB interrupt vector, for handling such events as VBUS interrupts
+ *  (on supported USB AVR models), device connections and disconnections, etc. as well as providing
+ *  easy to use macros for the management of the unified Endpoint/Pipe interrupt vector.
  *
  *  @{
  */
@@ -70,7 +70,7 @@
 
 			/** Disables the given USB interrupt vector.
 			 *
-			 *  \see USB_INT_Enable()
+			 *  \see \ref USB_INT_Enable()
 			 */
 			#define USB_INT_Disable(int)             MACROS{ USB_INT_GET_EN_REG(int)   &= ~(USB_INT_GET_EN_MASK(int));  }MACROE
 
@@ -96,7 +96,7 @@
 			 *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state
 			 *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by
 			 *        passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection
-			 *        and disconnection events may be manually fired by RAISE_EVENT(), and the USB_IsConnected global changed manually.
+			 *        and disconnection events may be manually fired by \ref RAISE_EVENT(), and the USB_IsConnected global changed manually.
 			 */
 			RAISES_EVENT(USB_Connect);
 
@@ -108,7 +108,7 @@
 			 *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state
 			 *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by
 			 *        passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection
-			 *        and disconnection events may be manually fired by RAISE_EVENT(), and the USB_IsConnected global changed manually.
+			 *        and disconnection events may be manually fired by \ref RAISE_EVENT(), and the USB_IsConnected global changed manually.
 			 */
 			RAISES_EVENT(USB_Disconnect);
 
@@ -118,7 +118,7 @@
 				 *
 				 *  \note Not all USB AVR models support VBUS interrupts; this event only exists on supported AVRs.
 				 *
-				 *  \see Events.h for more information on this event.
+				 *  \see \ref Group_Events for more information on this event.
 				 */
 				RAISES_EVENT(USB_VBUSChange);
 
@@ -126,7 +126,7 @@
 				 *
 				 *  \note Not all USB AVR models support VBUS interrupts; this event only exists on supported AVRs.
 				 *
-				 *  \see Events.h for more information on this event.
+				 *  \see \ref Group_Events for more information on this event.
 				 */
 				RAISES_EVENT(USB_VBUSConnect);
 
@@ -134,7 +134,7 @@
 				 *
 				 *  \note Not all USB AVR models support VBUS interrupts; this event only exists on supported AVRs.
 				 *
-				 *  \see Events.h for more information on this event.
+				 *  \see \ref Group_Events for more information on this event.
 				 */
 				RAISES_EVENT(USB_VBUSDisconnect);
 			#endif
@@ -143,21 +143,21 @@
 				/** This module raises the Suspended event when the host suspends the USB interface of the AVR
 				 *  whilst running in device mode.
 				 *
-				 *  \see Events.h for more information on this event.
+				 *  \see \ref Group_Events for more information on this event.
 				 */
 				RAISES_EVENT(USB_Suspend);
 
 				/** This module raises the Wake Up event when the host resumes the USB interface of the AVR
 				 *  whilst running in device mode.
 				 *
-				 *  \see Events.h for more information on this event.
+				 *  \see \ref Group_Events for more information on this event.
 				 */
 				RAISES_EVENT(USB_WakeUp);
 
 				/** This module raises the USB Reset event when the host resets the USB interface of the AVR
 				 *  whilst running in device mode.
 				 *
-				 *  \see Events.h for more information on this event.
+				 *  \see \ref Group_Events for more information on this event.
 				 */
 				RAISES_EVENT(USB_Reset);
 			#endif
@@ -168,7 +168,7 @@
 				 *
 				 *  \note Not all USB AVR models support host mode; this event only exists on supported AVRs.
 				 *
-				 *  \see Events.h for more information on this event.
+				 *  \see \ref Group_Events for more information on this event.
 				 */
 				RAISES_EVENT(USB_HostError);
 
@@ -177,7 +177,7 @@
 				 *
 				 *  \note Not all USB AVR models support host mode; this event only exists on supported AVRs.
 				 *
-				 *  \see Events.h for more information on this event.
+				 *  \see \ref Group_Events for more information on this event.
 				 */
 				RAISES_EVENT(USB_DeviceUnattached);
 			#endif
@@ -188,7 +188,7 @@
 				 *  \note Not all USB AVR models support host mode and thus the UID pin; this event only exists on
 				 *        supported AVRs.
 				 *
-				 *  \see Events.h for more information on this event.
+				 *  \see \ref Group_Events for more information on this event.
 				 */
 				RAISES_EVENT(USB_UIDChange);
 			#endif