X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/cb779e3d7d32d7c43e0a45bb526de0a04135b0c7..d4684b29b9a3a4b45b6422d0f1cf6c79639c84c8:/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c?ds=inline diff --git a/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c b/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c index 26d6bf16f..df0374dea 100644 --- a/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c +++ b/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c @@ -1,13 +1,13 @@ /* LUFA Library - Copyright (C) Dean Camera, 2010. + Copyright (C) Dean Camera, 2012. dean [at] fourwalledcubicle [dot] com www.lufa-lib.org */ /* - Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted @@ -43,9 +43,9 @@ static void TINYNVM_SendPointerAddress(const uint16_t AbsoluteAddress) { /* Send the given 16-bit address to the target, LSB first */ XPROGTarget_SendByte(TPI_CMD_SSTPR | 0); - XPROGTarget_SendByte(((uint8_t*)&AbsoluteAddress)[0]); + XPROGTarget_SendByte(AbsoluteAddress & 0xFF); XPROGTarget_SendByte(TPI_CMD_SSTPR | 1); - XPROGTarget_SendByte(((uint8_t*)&AbsoluteAddress)[1]); + XPROGTarget_SendByte(AbsoluteAddress >> 8); } /** Sends a SIN command to the target with the specified I/O address, ready for the data byte to be written. @@ -119,6 +119,46 @@ bool TINYNVM_WaitWhileNVMControllerBusy(void) } } +/** Enables the physical TPI interface on the target and enables access to the internal NVM controller. + * + * \return Boolean true if the TPI interface was enabled successfully, false otherwise + */ +bool TINYNVM_EnableTPI(void) +{ + /* Enable TPI programming mode with the attached target */ + XPROGTarget_EnableTargetTPI(); + + /* Lower direction change guard time to 32 USART bits */ + XPROGTarget_SendByte(TPI_CMD_SSTCS | TPI_CTRL_REG); + XPROGTarget_SendByte(0x02); + + /* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */ + XPROGTarget_SendByte(TPI_CMD_SKEY); + for (uint8_t i = sizeof(TPI_NVMENABLE_KEY); i > 0; i--) + XPROGTarget_SendByte(TPI_NVMENABLE_KEY[i - 1]); + + /* Wait until the NVM bus becomes active */ + return TINYNVM_WaitWhileNVMBusBusy(); +} + +/** Removes access to the target's NVM controller and physically disables the target's physical TPI interface. */ +void TINYNVM_DisableTPI(void) +{ + TINYNVM_WaitWhileNVMBusBusy(); + + do + { + /* Clear the NVMEN bit in the TPI STATUS register to disable TPI mode */ + XPROGTarget_SendByte(TPI_CMD_SSTCS | TPI_STATUS_REG); + XPROGTarget_SendByte(0x00); + + /* Read back the STATUS register, check to see if it took effect */ + XPROGTarget_SendByte(TPI_CMD_SLDCS | PDI_RESET_REG); + } while (XPROGTarget_ReceiveByte() != 0x00); + + XPROGTarget_DisableTargetTPI(); +} + /** Reads memory from the target's memory spaces. * * \param[in] ReadAddress Start address to read from within the target's address space @@ -149,7 +189,7 @@ bool TINYNVM_ReadMemory(const uint16_t ReadAddress, *(ReadBuffer++) = XPROGTarget_ReceiveByte(); } - return (TimeoutTicksRemaining != 0); + return (TimeoutTicksRemaining > 0); } /** Writes word addressed memory to the target's memory spaces. @@ -172,7 +212,7 @@ bool TINYNVM_WriteMemory(const uint16_t WriteAddress, if (WriteLength & 0x01) WriteBuffer[WriteLength++] = 0xFF; - /* Set the NVM control register to the WORD WRITE command for memory reading */ + /* Set the NVM control register to the WORD WRITE command for memory writing */ TINYNVM_SendWriteNVMRegister(XPROG_Param_NVMCMDRegAddr); XPROGTarget_SendByte(TINY_NVM_CMD_WORDWRITE); @@ -193,7 +233,7 @@ bool TINYNVM_WriteMemory(const uint16_t WriteAddress, XPROGTarget_SendByte(TPI_CMD_SST | TPI_POINTER_INDIRECT_PI); XPROGTarget_SendByte(*(WriteBuffer++)); - /* Need to decrement the write length twice, since we read out a whole word */ + /* Need to decrement the write length twice, since we wrote a whole two-byte word */ WriteLength -= 2; }