X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/cb779e3d7d32d7c43e0a45bb526de0a04135b0c7..3c1b28cf5ff16fede61f2abf37d5616f3e661036:/Projects/TempDataLogger/Descriptors.c?ds=sidebyside diff --git a/Projects/TempDataLogger/Descriptors.c b/Projects/TempDataLogger/Descriptors.c index 64efef531..551c66ae6 100644 --- a/Projects/TempDataLogger/Descriptors.c +++ b/Projects/TempDataLogger/Descriptors.c @@ -1,13 +1,13 @@ /* LUFA Library - Copyright (C) Dean Camera, 2010. + Copyright (C) Dean Camera, 2012. dean [at] fourwalledcubicle [dot] com www.lufa-lib.org */ /* - Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted @@ -37,17 +37,6 @@ #include "Descriptors.h" -/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as - * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL. - * This allows the host to track a device across insertions on different ports, allowing them to retain allocated - * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices - * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value - * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and - * port location). - */ -#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR) - #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor. -#endif /** HID class report descriptor. This is a special descriptor constructed with values from the * USBIF HID class specification to describe the reports and capabilities of the HID device. This @@ -55,24 +44,16 @@ * the device will send, and what it may be sent back from the host. Refer to the HID specification for * more details on HID report descriptors. */ -USB_Descriptor_HIDReport_Datatype_t PROGMEM GenericReport[] = +const USB_Descriptor_HIDReport_Datatype_t PROGMEM GenericReport[] = { - 0x06, 0x9c, 0xff, /* Usage Page (Vendor Defined) */ - 0x09, 0x01, /* Usage (Vendor Defined) */ - 0xa1, 0x01, /* Collection (Vendor Defined) */ - 0x09, 0x02, /* Usage (Vendor Defined) */ - 0x75, 0x08, /* Report Size (8) */ - 0x95, GENERIC_REPORT_SIZE, /* Report Count (GENERIC_REPORT_SIZE) */ - 0x15, 0x80, /* Logical Minimum (-128) */ - 0x25, 0x7F, /* Logical Maximum (127) */ - 0x81, 0x02, /* Input (Data, Variable, Absolute) */ - 0x09, 0x03, /* Usage (Vendor Defined) */ - 0x75, 0x08, /* Report Size (8) */ - 0x95, GENERIC_REPORT_SIZE, /* Report Count (GENERIC_REPORT_SIZE) */ - 0x15, 0x00, /* Logical Minimum (0) */ - 0x25, 0xff, /* Logical Maximum (255) */ - 0x91, 0x02, /* Output (Data, Variable, Absolute) */ - 0xc0 /* End Collection */ + /* Use the HID class driver's standard Vendor HID report. + * Vendor Usage Page: 1 + * Vendor Collection Usage: 1 + * Vendor Report IN Usage: 2 + * Vendor Report OUT Usage: 3 + * Vendor Report Size: GENERIC_REPORT_SIZE + */ + HID_DESCRIPTOR_VENDOR(0x00, 0x01, 0x02, 0x03, GENERIC_REPORT_SIZE) }; /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall @@ -80,7 +61,7 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM GenericReport[] = * number of device configurations. The descriptor is read out by the USB host when the enumeration * process begins. */ -USB_Descriptor_Device_t PROGMEM DeviceDescriptor = +const USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, @@ -107,7 +88,7 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = * and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting * a configuration so that the host may correctly communicate with the USB device. */ -USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = +const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Config = { @@ -119,7 +100,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), + .ConfigAttributes = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED), .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, @@ -144,20 +125,20 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | MASS_STORAGE_IN_EPNUM), + .EndpointAddress = MASS_STORAGE_IN_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MASS_STORAGE_IO_EPSIZE, - .PollingIntervalMS = 0x00 + .PollingIntervalMS = 0x05 }, .MS_DataOutEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | MASS_STORAGE_OUT_EPNUM), + .EndpointAddress = MASS_STORAGE_OUT_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MASS_STORAGE_IO_EPSIZE, - .PollingIntervalMS = 0x00 + .PollingIntervalMS = 0x05 }, .HID_Interface = @@ -191,10 +172,10 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | GENERIC_IN_EPNUM), + .EndpointAddress = GENERIC_IN_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = GENERIC_EPSIZE, - .PollingIntervalMS = 0x0A + .PollingIntervalMS = 0x05 }, }; @@ -202,7 +183,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = * the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate * via the language ID table available at USB.org what languages the device supports for its string descriptors. */ -USB_Descriptor_String_t PROGMEM LanguageString = +const USB_Descriptor_String_t PROGMEM LanguageString = { .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, @@ -213,7 +194,7 @@ USB_Descriptor_String_t PROGMEM LanguageString = * form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device * Descriptor. */ -USB_Descriptor_String_t PROGMEM ManufacturerString = +const USB_Descriptor_String_t PROGMEM ManufacturerString = { .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, @@ -224,7 +205,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString = * and is read out upon request by the host when the appropriate string ID is requested, listed in the Device * Descriptor. */ -USB_Descriptor_String_t PROGMEM ProductString = +const USB_Descriptor_String_t PROGMEM ProductString = { .Header = {.Size = USB_STRING_LEN(22), .Type = DTYPE_String},