X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/c20a94a4e84c89debf5e7109482ede708a694a0c..2ee9fc707784e115d744dbc229bdc893f4bb6bc1:/Demos/Device/CDC/CDC.c diff --git a/Demos/Device/CDC/CDC.c b/Demos/Device/CDC/CDC.c index 59aa98ceb..d7ebb9e6b 100644 --- a/Demos/Device/CDC/CDC.c +++ b/Demos/Device/CDC/CDC.c @@ -104,7 +104,7 @@ int main(void) /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and * starts the library USB task to begin the enumeration and USB management process. */ -EVENT_HANDLER(USB_Connect) +void EVENT_USB_Connect(void) { /* Start USB management task */ Scheduler_SetTaskMode(USB_USBTask, TASK_RUN); @@ -116,7 +116,7 @@ EVENT_HANDLER(USB_Connect) /** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via * the status LEDs and stops the USB management and CDC management tasks. */ -EVENT_HANDLER(USB_Disconnect) +void EVENT_USB_Disconnect(void) { /* Stop running CDC and USB management tasks */ Scheduler_SetTaskMode(CDC_Task, TASK_STOP); @@ -129,7 +129,7 @@ EVENT_HANDLER(USB_Disconnect) /** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration * of the USB device after enumeration - the device endpoints are configured and the CDC management task started. */ -EVENT_HANDLER(USB_ConfigurationChanged) +void EVENT_USB_ConfigurationChanged(void) { /* Setup CDC Notification, Rx and Tx Endpoints */ Endpoint_ConfigureEndpoint(CDC_NOTIFICATION_EPNUM, EP_TYPE_INTERRUPT, @@ -155,7 +155,7 @@ EVENT_HANDLER(USB_ConfigurationChanged) * control requests that are not handled internally by the USB library (including the CDC control commands, * which are all issued via the control endpoint), so that they can be handled appropriately for the application. */ -EVENT_HANDLER(USB_UnhandledControlPacket) +void EVENT_USB_UnhandledControlPacket(void) { uint8_t* LineCodingData = (uint8_t*)&LineCoding;