X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/c20a94a4e84c89debf5e7109482ede708a694a0c..2a0c28e6e47c8a173f32fc99cd8666a2633c5c12:/Bootloaders/DFU/makefile

diff --git a/Bootloaders/DFU/makefile b/Bootloaders/DFU/makefile
index d55235b5d..def34aa96 100644
--- a/Bootloaders/DFU/makefile
+++ b/Bootloaders/DFU/makefile
@@ -51,7 +51,7 @@
 MCU = at90usb1287
 
 
-# Target board (see library BoardTypes.h documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
 BOARD = USBKEY
@@ -89,7 +89,11 @@ F_CPU = 8000000
 #
 #     If no clock division is performed on the input clock inside the AVR (via the
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_CLOCK = 8000000
+F_CLOCK = $(F_CPU)
+
+
+# Starting byte address of the bootloader
+BOOT_START = 0x1E000
 
 
 # Output format. (can be srec, ihex, binary)
@@ -110,6 +114,17 @@ OBJDIR = .
 LUFA_PATH = ../..
 
 
+# LUFA library compile-time options
+LUFA_OPTS  = -D USB_DEVICE_ONLY
+LUFA_OPTS += -D USE_NONSTANDARD_DESCRIPTOR_NAMES
+LUFA_OPTS += -D CONTROL_ONLY_DEVICE
+LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=32
+LUFA_OPTS += -D TOTAL_NUM_CONFIGURATIONS=1
+LUFA_OPTS += -D USE_RAM_DESCRIPTORS
+LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS += -D NO_INTERNAL_SERIAL
+
+
 # List C source files here. (C dependencies are automatically generated.)
 SRC = $(TARGET).c                                                 \
 	  Descriptors.c                                               \
@@ -120,11 +135,9 @@ SRC = $(TARGET).c                                                 \
 	  $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c           \
  	  $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c               \
 	  $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c            \
-	  $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/StdDescriptors.c    \
 	  $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c      \
 	  $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c           \
-	  $(LUFA_PATH)/LUFA/Drivers/USB/Class/ConfigDescriptor.c      \
-	  $(LUFA_PATH)/LUFA/Drivers/USB/Class/HIDParser.c             \
+	  $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c  \
 
  
 # List C++ source files here. (C dependencies are automatically generated.)
@@ -169,16 +182,9 @@ EXTRAINCDIRS = $(LUFA_PATH)/
 CSTANDARD = -std=gnu99
 
 
-# Starting byte address of the bootloader
-BOOT_START = 0x1E000
-
-
 # Place -D or -U options here for C sources
-CDEFS  = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD)
-CDEFS += -DUSB_DEVICE_ONLY -DUSE_NONSTANDARD_DESCRIPTOR_NAMES -DCONTROL_ONLY_DEVICE
-CDEFS += -DSTATIC_ENDPOINT_CONFIGURATION -DFIXED_CONTROL_ENDPOINT_SIZE=32
-CDEFS += -DUSE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-CDEFS += -DUSE_RAM_DESCRIPTORS -DBOOT_START_ADDR=$(BOOT_START)UL -DUSE_SINGLE_DEVICE_CONFIGURATION
+CDEFS  = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
+CDEFS += -DBOOT_START_ADDR=$(BOOT_START)UL
 
 
 # Place -D or -U options here for ASM sources
@@ -209,10 +215,6 @@ CFLAGS += -fdata-sections
 CFLAGS += -fpack-struct
 CFLAGS += -fshort-enums
 CFLAGS += -fno-inline-small-functions
-CFLAGS += -fno-reorder-blocks
-CFLAGS += -fno-reorder-blocks-and-partition
-CFLAGS += -fno-reorder-functions
-CFLAGS += -fno-toplevel-reorder
 CFLAGS += -Wall
 CFLAGS += -Wstrict-prototypes
 CFLAGS += -Wundef
@@ -503,7 +505,7 @@ sizeafter:
 checkhooks: build
 	@echo
 	@echo ------- Unhooked LUFA Events -------
-	@$(shell) (grep -s '^Event.*LUFA/.*\\.o' $(TARGET).map | \
+	@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
 	           cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
 			   echo "(None)"
 	@echo ------------------------------------