X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/c1a1b6eeecb375259968ef6d989833312047f2d8..e611b250c170c9e830f8212ca5d49e505e3f4af1:/Bootloaders/DFU/makefile

diff --git a/Bootloaders/DFU/makefile b/Bootloaders/DFU/makefile
index 5a8e4eeed..cb19cb6c7 100644
--- a/Bootloaders/DFU/makefile
+++ b/Bootloaders/DFU/makefile
@@ -32,18 +32,6 @@
 # make program = Download the hex file to the device, using avrdude.
 #                Please customize the avrdude settings below first!
 #
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-#            have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-#             have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-#               (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-#                (must have Atmel FLIP installed).
-#
 # make doxygen = Generate DoxyGen documentation for the project (must have
 #                DoxyGen installed)
 #
@@ -90,6 +78,20 @@ BOARD  = USBKEY
 F_CPU = 8000000
 
 
+# Input clock frequency.
+#     This will define a symbol, F_CLOCK, in all source code files equal to the 
+#     input clock frequency (before any prescaling is performed). This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_CLOCK = 8000000
+
+
 # Output format. (can be srec, ihex, binary)
 FORMAT = ihex
 
@@ -162,10 +164,12 @@ BOOT_START = 0x1E000
 
 
 # Place -D or -U options here for C sources
-CDEFS  = -DF_CPU=$(F_CPU)UL -DBOARD=BOARD_$(BOARD) -DUSE_NONSTANDARD_DESCRIPTOR_NAMES -DSTATIC_ENDPOINT_CONFIGURATION
-CDEFS += -DUSB_DEVICE_ONLY -DUSE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-CDEFS += -DUSE_RAM_DESCRIPTORS -DBOOT_START_ADDR=$(BOOT_START)UL -DFIXED_CONTROL_ENDPOINT_SIZE=32 -DUSE_SINGLE_DEVICE_CONFIGURATION
-CDEFS += -DNO_CLEARSET_FEATURE_REQUEST
+CDEFS  = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD)
+CDEFS += -DUSB_DEVICE_ONLY -DUSE_NONSTANDARD_DESCRIPTOR_NAMES -DFEATURELESS_CONTROL_ONLY_DEVICE
+CDEFS += -DSTATIC_ENDPOINT_CONFIGURATION -DFIXED_CONTROL_ENDPOINT_SIZE=32
+CDEFS += -DUSE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+CDEFS += -DUSE_RAM_DESCRIPTORS -DBOOT_START_ADDR=$(BOOT_START)UL -DUSE_SINGLE_DEVICE_CONFIGURATION
+
 
 # Place -D or -U options here for ASM sources
 ADEFS = -DF_CPU=$(F_CPU)
@@ -443,7 +447,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 
 
 # Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode sizeafter end
+all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
 
 # Change the build target to build a HEX file or a library.
 build: elf hex eep lss sym
@@ -492,8 +496,8 @@ checkhooks: build
 	@$(shell) (grep -s '^Event.*LUFA/.*\\.o' $(TARGET).map | \
 	           cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
 			   echo "(None)"
-	@echo ----- End Unhooked LUFA Events -----
-	
+	@echo ------------------------------------
+
 checklibmode:
 	@echo
 	@echo ----------- Library Mode -----------
@@ -502,6 +506,12 @@ checklibmode:
 	          || echo "No specific mode (both device and host mode allowable)."
 	@echo ------------------------------------
 
+checkboard:
+	@echo
+	@echo ---------- Selected Board ----------
+	@echo Selected board model is $(BOARD).
+	@echo ------------------------------------
+	
 # Display compiler version information.
 gccversion : 
 	@$(CC) --version
@@ -512,26 +522,6 @@ gccversion :
 program: $(TARGET).hex $(TARGET).eep
 	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 
-flip: $(TARGET).hex
-	batchisp -hardware usb -device $(MCU) -operation erase f
-	batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
-	batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
-	dfu-programmer $(MCU) erase
-	dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
-	dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
-	copy $(TARGET).eep $(TARGET)eep.hex
-	batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
-	batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
-	batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
-	dfu-programmer $(MCU) erase
-	dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
-	dfu-programmer $(MCU) reset
 
 # Generate avr-gdb config/init file which does the following:
 #     define the reset signal, load the target file, connect to target, and set 
@@ -671,10 +661,11 @@ clean: begin clean_list clean_binary end
 
 clean_binary:
 	$(REMOVE) $(TARGET).hex
-
+	
 clean_list:
 	@echo $(MSG_CLEANING)
 	$(REMOVE) $(TARGET).eep
+	$(REMOVE) $(TARGET)eep.hex
 	$(REMOVE) $(TARGET).cof
 	$(REMOVE) $(TARGET).elf
 	$(REMOVE) $(TARGET).map
@@ -682,8 +673,6 @@ clean_list:
 	$(REMOVE) $(TARGET).lss
 	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
 	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
-	$(REMOVE) $(ASRC:%.S=$(OBJDIR)/%.o)
-	$(REMOVE) $(ASRC:%.S=$(OBJDIR)/%.lst)
 	$(REMOVE) $(SRC:.c=.s)
 	$(REMOVE) $(SRC:.c=.d)
 	$(REMOVE) $(SRC:.c=.i)
@@ -694,7 +683,7 @@ doxygen:
 	@echo Generating Project Documentation...
 	@doxygen Doxygen.conf
 	@echo Documentation Generation Complete.
-	
+
 clean_doxygen:
 	rm -rf Documentation
 
@@ -707,8 +696,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
 
 
 # Listing of phony targets.
-.PHONY : all checkhooks checklibmode begin  \
-finish end sizebefore sizeafter gccversion  \
-build elf hex eep lss sym coff extcoff      \
-clean clean_list clean_binary program debug \
-gdb-config doxygen clean_doxygen
+.PHONY : all checkhooks checklibmode checkboard   \
+begin finish end sizebefore sizeafter gccversion  \
+build elf hex eep lss sym coff extcoff clean      \
+clean_list clean_binary program debug gdb-config  \
+doxygen
\ No newline at end of file