X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/c0e4f52e8fecf74bc26ba813522aa96300bb844e..5517f96e86b9447780a3e27bb455697f9fc65eea:/LUFA/Drivers/USB/Class/Host/Printer.h diff --git a/LUFA/Drivers/USB/Class/Host/Printer.h b/LUFA/Drivers/USB/Class/Host/Printer.h index 37216081b..96ecd0fd6 100644 --- a/LUFA/Drivers/USB/Class/Host/Printer.h +++ b/LUFA/Drivers/USB/Class/Host/Printer.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -56,7 +56,7 @@ /* Includes: */ #include "../../USB.h" #include "../Common/Printer.h" - + /* Enable C linkage for C++ Compilers: */ #if defined(__cplusplus) extern "C" { @@ -109,10 +109,9 @@ { PRNT_ENUMERROR_NoError = 0, /**< Configuration Descriptor was processed successfully. */ PRNT_ENUMERROR_InvalidConfigDescriptor = 1, /**< The device returned an invalid Configuration Descriptor. */ - PRNT_ENUMERROR_NoPrinterInterfaceFound = 2, /**< A compatible Printer interface was not found in the device's Configuration Descriptor. */ - PRNT_ENUMERROR_EndpointsNotFound = 3, /**< Compatible Printer endpoints were not found in the device's interfaces. */ + PRNT_ENUMERROR_NoCompatibleInterfaceFound = 2, /**< A compatible Printer interface was not found in the device's Configuration Descriptor. */ }; - + /* Function Prototypes: */ /** General management task for a given Printer host class interface, required for the correct operation of * the interface. This should be called frequently in the main program loop, before the master USB management task @@ -128,6 +127,10 @@ * the device. This should be called once after the stack has enumerated the attached device, while the host state * machine is in the Addressed state. * + * \note The pipe index numbers as given in the interface's configuration structure must not overlap with any other + * interface, or pipe bank corruption will occur. Gaps in the allocated pipe numbers or non-sequential indexes + * within a single interface is allowed, but no two interfaces of any type have have interleaved pipe indexes. + * * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state. * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor. * \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor. @@ -137,7 +140,7 @@ uint8_t PRNT_Host_ConfigurePipes(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo, uint16_t ConfigDescriptorSize, void* DeviceConfigDescriptor) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3); - + /** Configures the printer to enable Bidirectional mode, if it is not already in this mode. This should be called * once the connected device's configuration has been set, to ensure the printer is ready to accept commands. * @@ -146,7 +149,7 @@ * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum. */ uint8_t PRNT_Host_SetBidirectionalMode(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); - + /** Retrieves the status of the virtual Printer port's inbound status lines. The result can then be masked against the * PRNT_PORTSTATUS_* macros to determine the printer port's status. * @@ -169,7 +172,7 @@ /** Flushes any data waiting to be sent, ensuring that the send buffer is cleared. * - * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the * call will fail. * * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state. @@ -182,7 +185,7 @@ * printer is able to understand - for example, PCL data. Not all printers accept all printer languages; see * \ref PRNT_Host_GetDeviceID() for details on determining acceptable languages for an attached printer. * - * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the * call will fail. * * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state. @@ -192,15 +195,15 @@ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. */ uint8_t PRNT_Host_SendString(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo, - void* Buffer, + void* Buffer, const uint16_t Length) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2); /** Sends a given byte to the attached USB device, if connected. If a device is not connected when the function is called, the * byte is discarded. Bytes will be queued for transmission to the device until either the pipe bank becomes full, or the - * \ref PRNT_Host_Flush() function is called to flush the pending data to the host. This allows for multiple bytes to be + * \ref PRNT_Host_Flush() function is called to flush the pending data to the host. This allows for multiple bytes to be * packed into a single pipe packet, increasing data throughput. * - * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the * call will fail. * * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state. @@ -216,20 +219,20 @@ * immediately. If multiple bytes are to be received, they should be buffered by the user application, as the pipe bank will not be * released back to the USB controller until all bytes are read. * - * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the * call will fail. * * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state. * * \return Total number of buffered bytes received from the device. */ - uint16_t PRNT_Host_BytesReceived(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo); - + uint16_t PRNT_Host_BytesReceived(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo); + /** Reads a byte of data from the device. If no data is waiting to be read of if a USB device is not connected, the function * returns a negative value. The \ref PRNT_Host_BytesReceived() function may be queried in advance to determine how many bytes * are currently buffered in the Printer interface's data receive pipe. * - * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the * call will fail. * * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state. @@ -237,7 +240,7 @@ * \return Next received byte from the device, or a negative value if no data received. */ int16_t PRNT_Host_ReceiveByte(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo); - + /** Retrieves the attached printer device's ID string, formatted according to IEEE 1284. This string is sent as a * Unicode string from the device and is automatically converted to an ASCII encoded C string by this function, thus * the maximum reportable string length is two less than the size given (to accommodate the Unicode string length @@ -265,17 +268,14 @@ #define REQ_GetDeviceID 0 #define REQ_GetPortStatus 1 #define REQ_SoftReset 2 - - #define PRNT_FOUND_DATAPIPE_IN (1 << 0) - #define PRNT_FOUND_DATAPIPE_OUT (1 << 1) - + /* Function Prototypes: */ - #if defined(__INCLUDE_FROM_PRINTER_CLASS_HOST_C) - static uint8_t DCOMP_PRNT_NextPRNTInterface(void* const CurrentDescriptor) ATTR_NON_NULL_PTR_ARG(1); - static uint8_t DCOMP_PRNT_NextPRNTInterfaceEndpoint(void* const CurrentDescriptor) ATTR_NON_NULL_PTR_ARG(1); + #if defined(__INCLUDE_FROM_PRINTER_CLASS_HOST_C) + static uint8_t DCOMP_PRNT_Host_NextPRNTInterface(void* const CurrentDescriptor) ATTR_NON_NULL_PTR_ARG(1); + static uint8_t DCOMP_PRNT_Host_NextPRNTInterfaceEndpoint(void* const CurrentDescriptor) ATTR_NON_NULL_PTR_ARG(1); #endif #endif - + /* Disable C linkage for C++ Compilers: */ #if defined(__cplusplus) } @@ -284,3 +284,4 @@ #endif /** @} */ +