X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/c05c7c7df46a0377db8a72cb32f06aa40153d3e1..06d3797bacab37a75c9cc623ea50725acece82a2:/Projects/USBtoSerial/USBtoSerial.txt diff --git a/Projects/USBtoSerial/USBtoSerial.txt b/Projects/USBtoSerial/USBtoSerial.txt index f5378cced..db65b0e72 100644 --- a/Projects/USBtoSerial/USBtoSerial.txt +++ b/Projects/USBtoSerial/USBtoSerial.txt @@ -1,82 +1,83 @@ -/** \file - * - * This file contains special DoxyGen information for the generation of the main page and other special - * documentation pages. It is not a project source file. - */ - -/** \mainpage USB to Serial Converter Project (via CDC-ACM class) - * - * \section SSec_Compat Demo Compatibility: - * - * The following list indicates what microcontrollers are compatible with this demo. - * - * - Series 7 USB AVRs - * - Series 6 USB AVRs - * - Series 4 USB AVRs - * - Series 2 USB AVRs - * - * \section SSec_Info USB Information: - * - * The following table gives a rundown of the USB utilization of this demo. - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - *
USB Mode:Device
USB Class:Communications Device Class (CDC)
USB Subclass:Abstract Control Model (ACM)
Relevant Standards:USBIF CDC Class Standard
Usable Speeds:Full Speed Mode
- * - * \section SSec_Description Project Description: - * - * USB to Serial bridge project. This project allows a USB AVR to serve - * as a USB to USART bridge between a USB host and a device lacking a - * USB port. When programmed into a USB AVR, the AVR will enumerate as a - * virtual COM port. - * - * The AVR's hardware USART's settings will change to mirror as closely as - * possible the serial settings set on the host. However, due to hardware - * limitations, some options may not be supported (baud rates with unacceptable - * error rates at the AVR's clock speed, data lengths other than 6, 7 or 8 bits, - * 1.5 stop bits, parity other than none, even or odd). - * - * After running this demo for the first time on a new computer, - * you will need to supply the .INF file located in this demo - * project's directory as the device's driver when running under - * Windows. This will enable Windows to use its inbuilt CDC drivers, - * negating the need for custom drivers for the device. Other - * Operating Systems should automatically use their own inbuilt - * CDC-ACM drivers. - * - * \section SSec_Options Project Options - * - * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. - * - * - * - * - * - * - * - * - * - * - * - * - *
Define Name:Location:Description:
BUFF_STATICSIZERingBuff.hDefines the maximum number of bytes which can be buffered in each Ring Buffer.
- */ \ No newline at end of file +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \mainpage USB to Serial Converter Project + * + * \section Sec_Compat Project Compatibility: + * + * The following list indicates what microcontrollers are compatible with this project. + * + * - Series 7 USB AVRs (AT90USBxxx7) + * - Series 6 USB AVRs (AT90USBxxx6) + * - Series 4 USB AVRs (ATMEGAxxU4) + * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * + * \section Sec_Info USB Information: + * + * The following table gives a rundown of the USB utilization of this project. + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + *
USB Mode:Device
USB Class:Communications Device Class (CDC)
USB Subclass:Abstract Control Model (ACM)
Relevant Standards:USBIF CDC Class Standard
Usable Speeds:Full Speed Mode
+ * + * \section Sec_Description Project Description: + * + * USB to Serial bridge project. This project allows a USB AVR to serve + * as a USB to USART bridge between a USB host and a device lacking a + * USB port. When programmed into a USB AVR, the AVR will enumerate as a + * virtual COM port. + * + * The AVR's hardware USART's settings will change to mirror as closely as + * possible the serial settings set on the host. However, due to hardware + * limitations, some options may not be supported (baud rates with unacceptable + * error rates at the AVR's clock speed, data lengths other than 6, 7 or 8 bits, + * 1.5 stop bits, parity other than none, even or odd). + * + * After running this project for the first time on a new computer, + * you will need to supply the .INF file located in this project + * project's directory as the device's driver when running under + * Windows. This will enable Windows to use its inbuilt CDC drivers, + * negating the need for custom drivers for the device. Other + * Operating Systems should automatically use their own inbuilt + * CDC-ACM drivers. + * + * \section Sec_Options Project Options + * + * The following defines can be found in this project, which can control the project behaviour when defined, or changed in value. + * + * + * + * + * + * + * + * + * + * + * + * + *
Define Name:Location:Description:
BUFF_STATICSIZERingBuff.hDefines the maximum number of bytes which can be buffered in each Ring Buffer.
+ */ +