X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/bc3db793e9867567bc881942845c7d84c2b09e37..f9fb44b01c8594028944b4c361e30c8de3e4057b:/Bootloaders/CDC/makefile

diff --git a/Bootloaders/CDC/makefile b/Bootloaders/CDC/makefile
index 850d9dfc8..b449ff0c6 100644
--- a/Bootloaders/CDC/makefile
+++ b/Bootloaders/CDC/makefile
@@ -95,14 +95,14 @@ F_USB = $(F_CPU)
 # Note that the bootloader size and start address given in AVRStudio is in words and not
 # bytes, and so will need to be doubled to obtain the byte address needed by AVR-GCC.
 FLASH_SIZE_KB        = 128
-BOOT_SECTION_SIZE_KB = 4
+BOOT_SECTION_SIZE_KB = 8
 
 
 # Formulas used to calculate the starting address of the Bootloader section, and the User Application
 # API jump table (for more information on the latter, see the bootloader documentation). These formulas
 # should not need to be altered - modify the FLASH_SIZE_KB and BOOT_SECTION_KB values above instead.
 BOOT_START           = 0x$(shell echo "obase=16; ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024" | bc)
-BOOT_API_TABLESTART  = 0x$(shell echo "obase=16; (($(FLASH_SIZE_KB) * 1024) - 32)" | bc)
+BOOT_API_TABLESTART  = 0x$(shell echo "obase=16; (($(FLASH_SIZE_KB) * 1024) - 96)" | bc)
 
 
 # Output format. (can be srec, ihex, binary)
@@ -124,22 +124,7 @@ LUFA_PATH = ../..
 
 
 # LUFA library compile-time options and predefined tokens
-LUFA_OPTS  = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
-LUFA_OPTS += -D ORDERED_EP_CONFIG
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_RAM_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D NO_INTERNAL_SERIAL
-LUFA_OPTS += -D NO_DEVICE_SELF_POWER
-LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP
-LUFA_OPTS += -D NO_SOF_EVENTS
-
-#LUFA_OPTS += -D NO_BLOCK_SUPPORT
-#LUFA_OPTS += -D NO_EEPROM_BYTE_SUPPORT
-#LUFA_OPTS += -D NO_FLASH_BYTE_SUPPORT
-#LUFA_OPTS += -D NO_LOCK_BYTE_WRITE_SUPPORT
+LUFA_OPTS  = -D USE_LUFA_CONFIG_HEADER
 
 
 # Create the LUFA source path variables by including the LUFA root makefile
@@ -184,7 +169,7 @@ DEBUG = dwarf-2
 #     Each directory must be seperated by a space.
 #     Use forward slashes for directory separators.
 #     For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
 
 
 # Compiler flag to set the C Standard level.
@@ -207,7 +192,7 @@ CDEFS += $(LUFA_OPTS)
 ADEFS  = -DF_CPU=$(F_CPU)
 ADEFS += -DF_USB=$(F_USB)UL
 ADEFS += -DBOARD=BOARD_$(BOARD)
-ADEFS += -DBOOT_START_ADDR=$(BOOT_START)UL
+ADEFS += -DBOOT_START_ADDR=$(BOOT_START)
 ADEFS += $(LUFA_OPTS)
 
 
@@ -694,7 +679,9 @@ clean_list :
 
 doxygen:
 	@echo Generating Project Documentation \($(TARGET)\)...
-	@doxygen Doxygen.conf
+	@if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+	  exit 1; \
+	fi;
 	@echo Documentation Generation Complete.
 
 clean_doxygen: