X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/b9b03aadb219d06fbad9d110e508db93e45461af..cf22a744ec0da3b68c4ffdb14c6fa43f2e07542f:/Demos/Device/LowLevel/MIDI/MIDI.h?ds=sidebyside diff --git a/Demos/Device/LowLevel/MIDI/MIDI.h b/Demos/Device/LowLevel/MIDI/MIDI.h index 635036ae8..3e7a06d6d 100644 --- a/Demos/Device/LowLevel/MIDI/MIDI.h +++ b/Demos/Device/LowLevel/MIDI/MIDI.h @@ -44,49 +44,59 @@ #include "Descriptors.h" - #include // Library Version Information - #include // USB Functionality - #include // Joystick driver - #include // LEDs driver - #include // Board Buttons driver - #include // Simple scheduler for task management + #include + #include + #include + #include + #include /* Macros: */ /** MIDI command for a note on (activation) event */ - #define MIDI_COMMAND_NOTE_ON 0x90 + #define MIDI_COMMAND_NOTE_ON 0x90 /** MIDI command for a note off (deactivation) event */ - #define MIDI_COMMAND_NOTE_OFF 0x80 + #define MIDI_COMMAND_NOTE_OFF 0x80 /** Standard key press velocity value used for all note events, as no pressure sensor is mounted */ - #define MIDI_STANDARD_VELOCITY 64 + #define MIDI_STANDARD_VELOCITY 64 /** Convenience macro. MIDI channels are numbered from 1-10 (natural numbers) however the logical channel * addresses are zero-indexed. This converts a natural MIDI channel number into the logical channel address. * - * \param channel MIDI channel number to address + * \param[in] channel MIDI channel number to address */ - #define MIDI_CHANNEL(channel) (channel - 1) + #define MIDI_CHANNEL(channel) (channel - 1) - /* Enums: */ - /** Enum for the possible status codes for passing to the UpdateStatus() function. */ - enum MIDI_StatusCodes_t - { - Status_USBNotReady = 0, /**< USB is not ready (disconnected from a USB host) */ - Status_USBEnumerating = 1, /**< USB interface is enumerating */ - Status_USBReady = 2, /**< USB interface is connected and ready */ - }; + /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ + #define LEDMASK_USB_NOTREADY LEDS_LED1 - /* Task Definitions: */ - TASK(USB_MIDI_Task); + /** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */ + #define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3) - /* Function Prototypes: */ - void EVENT_USB_Connect(void); - void EVENT_USB_Disconnect(void); - void EVENT_USB_ConfigurationChanged(void); + /** LED mask for the library LED driver, to indicate that the USB interface is ready. */ + #define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4) + + /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ + #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - void SendMIDINoteChange(const uint8_t Pitch, const bool OnOff, - const uint8_t CableID, const uint8_t Channel); - void UpdateStatus(uint8_t CurrentStatus); + /* Type Defines: */ + /** Type define for a USB MIDI event packet, used to encapsulate sent and received MIDI messages from a USB MIDI interface. */ + typedef struct + { + unsigned char Command : 4; /**< MIDI command being sent or received in the event packet */ + unsigned char CableNumber : 4; /**< Virtual cable number of the event being sent or received in the given MIDI interface */ + + uint8_t Data1; /**< First byte of data in the MIDI event */ + uint8_t Data2; /**< Second byte of data in the MIDI event */ + uint8_t Data3; /**< Third byte of data in the MIDI event */ + } USB_MIDI_EventPacket_t; + + /* Function Prototypes: */ + void SetupHardware(void); + void MIDI_Task(void); + + void EVENT_USB_Device_Connect(void); + void EVENT_USB_Device_Disconnect(void); + void EVENT_USB_Device_ConfigurationChanged(void); #endif