X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/b9b03aadb219d06fbad9d110e508db93e45461af..0486f12e3eab71e75273b774bb13eeb5937c544d:/Demos/Device/LowLevel/AudioOutput/AudioOutput.h

diff --git a/Demos/Device/LowLevel/AudioOutput/AudioOutput.h b/Demos/Device/LowLevel/AudioOutput/AudioOutput.h
index d8725a07b..362a5540a 100644
--- a/Demos/Device/LowLevel/AudioOutput/AudioOutput.h
+++ b/Demos/Device/LowLevel/AudioOutput/AudioOutput.h
@@ -40,80 +40,34 @@
 		#include <avr/io.h>
 		#include <avr/wdt.h>
 		#include <avr/power.h>
+		#include <stdlib.h>
 
 		#include "Descriptors.h"
 		
-		#include <LUFA/Version.h>                    // Library Version Information
-		#include <LUFA/Drivers/USB/USB.h>            // USB Functionality
-		#include <LUFA/Drivers/Board/LEDs.h>         // LEDs driver
-		#include <LUFA/Scheduler/Scheduler.h>        // Simple scheduler for task management
+		#include <LUFA/Version.h>
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Drivers/Board/LEDs.h>
 	
 	/* Macros: */
-		#if defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER)
-			#define TCCRxA          TCCR3A
-			#define TCCRxB          TCCR3B
-			#define OCRxA           OCR3A
-			#define OCRxB           OCR3B
-			#define WGMx0           WGM30
-			#define WGMx2           WGM32
-			#define COMxA1          COM3A1
-			#define COMxA0          COM3A0
-			#define COMxB1          COM3B1
-			#define COMxB0          COM3B0
-			#define CSx0            CS30
-		#else
-			/** Timer count register used for left channel PWM audio output (or mixed output in mono output mode) */
-			#define TCCRxA          TCCR1A
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
 
-			/** Timer count register used for right channel PWM audio output */
-			#define TCCRxB          TCCR1B
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
 
-			/** Timer compare register used for left channel PWM audio output (or mixed output in mono output mode) */
-			#define OCRxA           OCR1A
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
 
-			/** Timer compare register used for right channel PWM audio output */
-			#define OCRxB           OCR1B
-
-			/** Timer control register mask used to select PWM mode */
-			#define WGMx0           WGM10
-
-			/** Timer control register mask used to select PWM mode */
-			#define WGMx2           WGM12
-
-			/** Timer control register mask used to set, clear or toggle channel output pin on match */
-			#define COMxA1          COM1A1
-
-			/** Timer control register mask used to set, clear or toggle channel output pin on match */
-			#define COMxA0          COM1A0
-
-			/** Timer control register mask used to set, clear or toggle channel output pin on match */
-			#define COMxB1          COM1B1
-
-			/** Timer control register mask used to set, clear or toggle channel output pin on match */
-			#define COMxB0          COM1B0
-
-			/** Timer control register mask used to start the timer at Fcpu clock rate */
-			#define CSx0            CS10
-		#endif
-		
-	/* Enums: */
-		/** Enum for the possible status codes for passing to the UpdateStatus() function. */
-		enum AudioOutput_StatusCodes_t
-		{
-			Status_USBNotReady    = 0, /**< USB is not ready (disconnected from a USB host) */
-			Status_USBEnumerating = 1, /**< USB interface is enumerating */
-			Status_USBReady       = 2, /**< USB interface is connected and ready */
-		};
-
-	/* Task Definitions: */
-		TASK(USB_Audio_Task);
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
 	
 	/* Function Prototypes: */
-		void EVENT_USB_Connect(void);
-		void EVENT_USB_Disconnect(void);
-		void EVENT_USB_ConfigurationChanged(void);
-		void EVENT_USB_UnhandledControlPacket(void);
-		
-		void UpdateStatus(uint8_t CurrentStatus);
+		void SetupHardware(void);
+		void USB_Audio_Task(void);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_UnhandledControlRequest(void);
 
 #endif