X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/b5ca3990c2ec9dc240fb334002ed2f7c82eea853..cf610c5c91c3eee02dec7ca848acc8da831ad98a:/Demos/Host/LowLevel/CDCHost/CDCHost.c diff --git a/Demos/Host/LowLevel/CDCHost/CDCHost.c b/Demos/Host/LowLevel/CDCHost/CDCHost.c index e00332f9f..0b09c5a93 100644 --- a/Demos/Host/LowLevel/CDCHost/CDCHost.c +++ b/Demos/Host/LowLevel/CDCHost/CDCHost.c @@ -36,15 +36,60 @@ #include "CDCHost.h" +#if 0 +/* NOTE: Here you can set up a standard stream using the created virtual serial port, so that the standard stream functions in + * can be used on the virtual serial port (e.g. fprintf(&USBSerial, "Test"); to print a string). + */ + +static int CDC_putchar(char c, FILE *stream) +{ + Pipe_SelectPipe(CDC_DATAPIPE_OUT); + + if (Pipe_WaitUntilReady()) + return -1; + + Pipe_Write_Byte(c); + Pipe_ClearIN(); + + return 0; +} + +static int CDC_getchar(FILE *stream) +{ + int c; + + Pipe_SelectPipe(CDC_DATAPIPE_IN); + + for (;;) + { + if (Pipe_WaitUntilReady()) + return -1; + + if (!(Pipe_BytesInPipe())) + { + Pipe_ClearOUT(); + } + else + { + c = Pipe_Read_Byte(); + break; + } + } + + return c; +} + +static FILE USBSerial = FDEV_SETUP_STREAM(CDC_putchar, CDC_getchar, _FDEV_SETUP_RW); +#endif + /** Main program entry point. This routine configures the hardware required by the application, then - * starts the scheduler to run the application tasks. + * enters a loop to run the application tasks in sequence. */ int main(void) { SetupHardware(); - puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY - "CDC Host Demo running.\r\n" ESC_INVERSE_OFF)); + puts_P(PSTR(ESC_FG_CYAN "CDC Host Demo running.\r\n" ESC_FG_WHITE)); LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); @@ -74,36 +119,36 @@ void SetupHardware(void) /** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and * starts the library USB task to begin the enumeration and USB management process. */ -void EVENT_USB_DeviceAttached(void) +void EVENT_USB_Host_DeviceAttached(void) { - puts_P(PSTR("Device Attached.\r\n")); + puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE)); LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); } /** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and * stops the library USB task management process. */ -void EVENT_USB_DeviceUnattached(void) +void EVENT_USB_Host_DeviceUnattached(void) { - puts_P(PSTR("\r\nDevice Unattached.\r\n")); + puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE)); LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); } /** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully * enumerated by the host and is now ready to be used by the application. */ -void EVENT_USB_DeviceEnumerationComplete(void) +void EVENT_USB_Host_DeviceEnumerationComplete(void) { LEDs_SetAllLEDs(LEDMASK_USB_READY); } /** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */ -void EVENT_USB_HostError(const uint8_t ErrorCode) +void EVENT_USB_Host_HostError(const uint8_t ErrorCode) { USB_ShutDown(); - puts_P(PSTR(ESC_BG_RED "Host Mode Error\r\n")); - printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode); + printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n" + " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode); LEDs_SetAllLEDs(LEDMASK_USB_ERROR); for(;;); @@ -112,12 +157,12 @@ void EVENT_USB_HostError(const uint8_t ErrorCode) /** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while * enumerating an attached USB device. */ -void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode) +void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode) { - puts_P(PSTR(ESC_BG_RED "Dev Enum Error\r\n")); - printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode); - printf_P(PSTR(" -- Sub Error Code %d\r\n"), SubErrorCode); - printf_P(PSTR(" -- In State %d\r\n"), USB_HostState); + printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n" + " -- Error Code %d\r\n" + " -- Sub Error Code %d\r\n" + " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState); LEDs_SetAllLEDs(LEDMASK_USB_ERROR); } @@ -138,48 +183,49 @@ void CDC_Host_Task(void) if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead) { if (ErrorCode == ControlError) - puts_P(PSTR("Control Error (Get Configuration).\r\n")); + puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n")); else - puts_P(PSTR("Invalid Device.\r\n")); + puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n")); - printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode); + printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); /* Indicate error via status LEDs */ LEDs_SetAllLEDs(LEDMASK_USB_ERROR); /* Wait until USB device disconnected */ - while (USB_IsConnected); + USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } /* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */ if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful) { - puts_P(PSTR("Control Error (Set Configuration).\r\n")); - printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode); + printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n" + " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); /* Indicate error via status LEDs */ LEDs_SetAllLEDs(LEDMASK_USB_ERROR); /* Wait until USB device disconnected */ - while (USB_IsConnected); + USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + + puts_P(PSTR("CDC Device Enumerated.\r\n")); + USB_HostState = HOST_STATE_Configured; break; case HOST_STATE_Configured: - puts_P(PSTR("CDC Device Enumerated.\r\n")); - - USB_HostState = HOST_STATE_Ready; - break; - case HOST_STATE_Ready: /* Select and the data IN pipe */ Pipe_SelectPipe(CDC_DATAPIPE_IN); + Pipe_Unfreeze(); /* Check to see if a packet has been received */ if (Pipe_IsINReceived()) { + /* Re-freeze IN pipe after the packet has been received */ + Pipe_Freeze(); + /* Check if data is in the pipe */ if (Pipe_IsReadWriteAllowed()) { @@ -199,6 +245,9 @@ void CDC_Host_Task(void) Pipe_ClearIN(); } + /* Re-freeze IN pipe after use */ + Pipe_Freeze(); + /* Select and unfreeze the notification pipe */ Pipe_SelectPipe(CDC_NOTIFICATIONPIPE); Pipe_Unfreeze();