X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/b3aaffb792aed373fecd4af16478cb3c2b8c2a8f..e342ba8f649f779b58e2ca3bd2888477a8dcad05:/LUFA/DoxygenPages/ChangeLog.txt diff --git a/LUFA/DoxygenPages/ChangeLog.txt b/LUFA/DoxygenPages/ChangeLog.txt index 48dec1269..16d3fe676 100644 --- a/LUFA/DoxygenPages/ChangeLog.txt +++ b/LUFA/DoxygenPages/ChangeLog.txt @@ -9,19 +9,127 @@ * \section Sec_ChangeLogXXXXXX Version XXXXXX * New: * - Core: + * - Added additional MIDI command definitions to the MIDI class driver (thanks to Daniel Dreibrodt) + * - Added new CONCAT() and CONCAT_EXPANDED() convenience macros + * - Added new Printer Device Class driver + * - Library Applications: + * - Added new Printer class bootloader + * - Added new Mass Storage class bootloader + * + * Changed: + * - Core: + * - Updated the BUILD build system module to produce binary BIN files in addition to Intel HEX files + * - Updated the Android Accessory Class to accept version 2 protocol devices (with version 1 functionality) + * + * Fixed: + * - Core: + * - Fixed Low Speed USB devices broken when using the library HID Class driver (thanks to Michael) + * - Fixed possible register corruption in USB Host mode on AVR8 devices when ORDERED_EP_CONFIG is used (thanks to Martin Aakerberg) + * - Fixed Pipe_GetBoundEndpointAddress() returning invalid endpoint directions on AVR8 architecture devices (thanks to decerri) + * under some circumstances + * - Library Applications: + * - Added handler for SCSI_CMD_START_STOP_UNIT in demos using the Mass Storage class, to prevent ejection errors on *nix systems due to an + * unknown SCSI command + * - Fixed incorrect HID report descriptor generated for 16-bit axis ranges by the HID_DESCRIPTOR_MOUSE() and HID_DESCRIPTOR_JOYSTICK() + * macros (thanks to Armory) + * - Fixed race condition in the DFU class bootloader causing failed device reprogramming in some circumstances (thanks to Luis Mendes) + * + * \section Sec_ChangeLog130303 Version 130303 + * New: + * - Core: + * - Added support for the Arduino Leonardo board + * - Added support for the Atmel UC3-A3 Xplained board + * - Added support for the Xevelabs USB2AX revision 3.1 board + * - Added support for the Dimex Stange-ISP board (thanks to Gerhard Wesser) + * - Added new \c doxygen_upgrade and \c doxygen_create targets to the DOXYGEN build system module + * - Added new Board Hardware Information board driver + * - Library Applications: + * - Added a different device serial number when the AVRISP-MKII Clone project is in libUSB compatibility mode, so that + * both the libUSB and Jungo drivers can be installed at the same time without having to use a filter driver + * + * Changed: + * - Core: + * - Added workaround for broken VBUS detection on AVR8 devices when a bootloader starts the application + * via a software jump without first turning off the OTG pad (thanks to Simon Inns) + * - Library Applications: + * - Increased throughput in the USBtoSerial project now that data transmission is non-blocking (thanks to Joseph Lacerte) + * - Updated bootloader makefiles to remove dependency on the \c bc command line calculator tool + * - Updated AVRISP-MKII Clone Programmer project so that the SCK clock period is saved in EEPROM (thanks to Gerhard Wesser) + * - Changed all *_SendByte() function prototypes to accept a void pointer for the input buffer (thanks to Simon Kuppers) + * + * Fixed: + * - Core: + * - Fixed incorrectly issuing STALL response to unsupported control request SETUP packets, rather than in the data/status stage + * - Fixed inverted LEDs_GetLEDs() function implementation for the Benito, Minimus and Arduino UNO boards + * - Fixed missing Windows 32-bit compatibility sections in the LUFA INF driver files (thanks to Christan Beharrell) + * - Fixed logic hole breaking USB operations on a USB controller with only one supported USB mode and no USB_DEVICE_ONLY or USB_HOST_ONLY + * configuration token set + * - Fixed possible rounding in the VERSION_BCD() macros for some 0.01 step increments (thanks to Oliver Zander) + * - Fixed incorrect Dataflash functionality in the USBKEY board if the driver is modified for a single Dataflash chip (thanks to Jonathan Oakley) + * - Fixed incorrect definitions of \c HID_KEYBOARD_LED_KANA, \c HID_KEYBOARD_SC_KEYPAD_EQUAL_SIGN and \c HID_KEYBOARD_SC_KEYPAD_EQUAL_SIGN_AS400 + * and added a missing definition for \c HID_KEYBOARD_SC_APPLICATION (thanks to David Monro) + * - Fixed maximum allowed keyboard key code usage of \c 0x65 rather than \c 0xFF for the \c HID_DESCRIPTOR_KEYBOARD() macro (thanks to David Monro) + * - Fixed hardware race condition that could cause failed device enumerations for AVR8 and UC3 architectures (thanks to Mike Beyhs) + * - Fixed incorrect Minimus board LED definitions (thanks to Joonas Lahtinen) + * - Fixed incorrect ordering of the linker options in the build system causing link failures in some cases + * - Fixed bug in the TWI peripheral driver for the AVR8 devices causing incorrect failure codes to be returned in some cases (thanks to Peter K) + * - Fixed swapped LED3 and LED4 masks for the Olimex-32U4 development board LED driver + * - Fixed potential NULL pointer dereference in the HID Host mode Class Driver (thanks to Pavel Kuzmin) + * - Library Applications: + * - Fixed broken RESET_TOGGLES_LIBUSB_COMPAT compile time option in the AVRISP-MKII project + * - Fixed incompatibility in the CDC class bootloader on some systems (thanks to Sylvain Munaut) + * - Fixed lengthy timeouts in the USBtoSerial project if no application on the host is consuming data (thanks to Nicolas Saugnier) + * - Fixed lengthy automatic data flushing in the CDC and MIDI device class drivers + * - Fixed incorrect LED masks for received data display in the Device GenericHID demos (thanks to Denys Berkovskyy) + * - Fixed incorrect output in the HIDReportViewer project when no device is connected (thanks to Pavel Kuzmin) + * + * \section Sec_ChangeLog120730 Version 120730 + * New: + * - Core: + * - Added new, revamped modular build system with new makefile templates * - Added support for the BitWizard Multio and Big-Multio boards + * - Added support for the DorkbotPDX Duce board + * - Added support for the Olimex AVR-USB-32U4 board + * - Added support for the Olimex AVR-USB-T32U4 board + * - Added support for the Olimex AVR-ISP-MK2 board + * - Added new Endpoint_ConfigureEndpointTable() function + * - Added new Pipe_ConfigurePipeTable() function + * - Added build test to verify correct compilation of all board drivers using all driver APIs + * - Added build test to verify correct compilation of all bootloaders using all supported devices + * - Added build test to verify that there are no detectable errors in the codebase via static analysis + * - Added new JTAG_ENABLE() macro for the AVR8 architecture * - Library Applications: * - Modified the CDC Host demos to set a default CDC Line Encoding on enumerated devices * - Added Dataflash operational checks and aborts to all projects using the Dataflash to ensure it is working correctly before use + * - Added new SerialToLCD user project contributed by Simon Foster + * - Added new RESET_TOGGLES_LIBUSB_COMPAT compile time option to the AVRISP-MKII clone programmer project (thanks to Robert Spitzenpfeil) * * Changed: * - Core: * - Android Accessory Host property strings changed from a struct of pointer to an array to prevent unaligned access on greater than 8-bit architectures * - Audio Device Class driver changed to also require the index of the Audio Control interface within the device, for SET/GET/CUR/MIN/MAX/RES property adjustments * - Removed variable axis support from the HID_DESCRIPTOR_JOYSTICK() macro due to OS incompatibilities, replaced with fixed 3-axis joystick report structure + * - Removed the old pseudo-scheduler from the library as it was unused and deprecated since the 090810 release + * - Endpoint indexes are now specified as full endpoint addresses within the device in device mode, rather than a logical index + * - The Endpoint_ConfigureEndpoint() function no longer takes an endpoint direction as a parameter, as this is now deduced from the specified full endpoint + * address and type + * - The Endpoint_ConfigureEndpoint() function no longer takes a number of banks as a special mask; the number of banks is now specified as an integer parameter + * - Endpoints are now configured via instances of a new struct USB_Endpoint_Table_t in all device mode class drivers, rather than a list of endpoint parameters + * - Pipe indexes are now specified as full pipe addresses within the host in host mode, rather than a logical index + * - The Pipe_ConfigurePipe() function no longer takes an pipe token as a parameter, as this is now deduced from the specified full pipe address and type + * - The Pipe_ConfigurePipe() function no longer takes a number of banks as a special mask; the number of banks is now specified as an integer parameter + * - Pipes are now configured via instances of a new struct USB_Pipe_Table_t in all host mode class drivers, rather than a list of pipe parameters + * - Added support for various assert and debugging macros for the UC3 devices + * - Changed MIDI event structure MIDI_EventPacket_t to use a single field for the combined virtual cable index and command ID, to prevent bitfield packing issues + * on some architectures (thanks to Darren Gibbs) + * - Changed board LED driver implementations of LEDs_ToggleLEDs() for the AVR8 architecture to use the fast PIN register toggle alternative function for speed * - Library Applications: * - Raised the guard bits in the AVRISP-MKII clone project when in PDI and TPI to 32, to prevent communication errors on low quality connections to a target * - Added additional bootloader API data to expose the bootloader start address and class to the DFU and CDC class bootloaders + * - Reverted AVRISP-MKII clone project watchdog based command timeout patch in favour of a hardware timer, to allow for use in devices with WDTRST fuse programmed + * - The library bootloaders will now correctly start the user application after a watchdog-based application start, even if the /HWB line is held low externally + * during the reset phase + * - Increased endpoint polling interval for all demos and projects to 5ms, as 1ms was causing some enumeration issues on some machines (thanks to Riku Salminen) * * Fixed: * - Core: @@ -31,10 +139,26 @@ * - Fixed compile error for the UC3 architecture when INTERRUPT_CONTROL_ENDPOINT is specified (thanks to Andrus Aaslaid) * - Fixed compile error if LEDs_Disable() is called and BOARD=NONE is set (thanks to Sam Lin) * - Fixed inverted LED logic in the OLIMEX162 board LED driver + * - Fixed incorrect reponse to GET STATUS requests in device mode if NO_DEVICE_SELF_POWER or NO_DEVICE_REMOTE_WAKEUP tokens are defined (thanks to Georg Glock) + * - Fixed inverted LED logic in the USB2AX board LED driver + * - Fixed possible deadlock in the CDC device driver if the USB connection is dropped while the CDC_REQ_SetLineEncoding control request is being processed by + * the stack (thanks to Jonathan Hudgins) + * - Fixed broken MIDI host driver MIDI_Host_ReceiveEventPacket() function due to not unfreezing the MIDI data IN pipe before use (thanks to Michael Brown) + * - Fixed swapped Little Endian/Big Endian endpoint and pipe write code for the UC3 devices (thanks to Andrew Chu) + * - Fixed the JTAG_DISABLE() macro clearing all other bits in MCUSR when called + * - Fixed incorrect Micropendous board LED driver LEDs_SetAllLEDs() and LEDs_ChangeLEDs() function implementations (thanks to MitchJS) + * - Fixed endianess issues in the RNDIS host class driver for UC3 devices (thanks to Andrew Chu) * - Library Applications: * - Fixed error in the AVRISP-MKII programmer when ISP mode is used at 64KHz (thanks to Ben R. Porter) * - Fixed AVRISP-MKII programmer project failing to compile for the U4 chips when VTARGET_ADC_CHANNEL is defined to an invalid channel and NO_VTARGET_DETECT is * defined (thanks to Steven Morehouse) + * - Fixed AVRISP-MKII programmer project reset line polarity inverted when the generated EEP file is loaded into the USB AVR's EEPROM and avr-dude is used + * - Fixed CDC and DFU bootloaders failing to compile when the bootloader section size is 8KB or more (thanks to Georg Glock) + * - Fixed CDC and DFU bootloaders API function offsets incorrect on some devices (thanks to Rod DeMay) + * - Fixed incorrect DFU version number reported to the host in the DFU bootloader descriptors (thanks to Georg Glock) + * - Fixed incorrect version hundredths value encoding in VERSION_BCD() macro (thanks to Georg Glock) + * - Fixed invalid configuration descriptor in the low level KeyboardMouse device demo (thanks to Jun Wako) + * - Fixed CDC and DFU bootloaders API page erase and write function failures (thanks to Martin Lambert) * * \section Sec_ChangeLog120219 Version 120219 * New: @@ -1119,7 +1243,7 @@ * rather than passing the size back to the caller through a parameter and returning a boolean * * - * \section Sec_ChangeLog153 Version 1.5.3 - Released 2nd October, 2008 + * \section Sec_ChangeLog153 Version 1.5.3 (081002) * * - Fixed CDC bootloader using pgmspace macros for some descriptors inappropriately * - Updated all Mouse and Keyboard device demos to include boot protocol support (now works in BIOS) @@ -1154,7 +1278,7 @@ * are reflected in the hardware (change was previously lost) * * - * \section Sec_ChangeLog152 Version 1.5.2 - Released 31st July, 2008 + * \section Sec_ChangeLog152 Version 1.5.2 (080731) * * - Fixed SwapEndian_32() function in Common.h so that it now works correctly (wrong parameter types) * - Updated RNDIS demo - notification endpoint is no longer blocking so that it works with faulty Linux RNDIS @@ -1168,7 +1292,7 @@ * - Library license changed from LGPLv3 to MIT license * * - * \section Sec_ChangeLog151 Version 1.5.1 - Released 7th July, 2008 + * \section Sec_ChangeLog151 Version 1.5.1 (080707) * * - Changed host demos to enable the host function task on the firing of the USB_DeviceEnumerationComplete event * rather than the USB_DeviceAttached event @@ -1195,7 +1319,7 @@ * - Added RNDISEthernet demo application * * - * \section Sec_ChangeLog150 Version 1.5.0 - Released 10 June, 2008 + * \section Sec_ChangeLog150 Version 1.5.0 (080610) * * - Fixed MIDI demo, now correctly waits for the endpoint to be ready between multiple note messages * - Added CDC Host demo application @@ -1247,14 +1371,14 @@ * - Added USE_NONSTANDARD_DESCRIPTOR_NAMES token to switch back to the non-standard descriptor element names * * - * \section Sec_ChangeLog141 Version 1.4.1 - Released 19 May, 2008 + * \section Sec_ChangeLog141 Version 1.4.1 (090519) * * - Enhanced KeyboardWithParser demo, now prints out pressed alphanumeric characters like the standard demo * - Fixed MassStorage demo, read/writes using non mode-10 commands now work correctly * - Corrected version number in Version.h * * - * \section Sec_ChangeLog140 Version 1.4.0 - Released 5 May, 2008 + * \section Sec_ChangeLog140 Version 1.4.0 (090505) * * - Added HID Report Parser API to the library * - Added Mouse and Keyboard host demo applications, using the new HID report parser engine @@ -1280,7 +1404,7 @@ * - Added 10 microsecond delay after addressing devices in host mode, to prevent control stalls * * - * \section Sec_ChangeLog132 Version 1.3.2 - Released April 1st, 2008 + * \section Sec_ChangeLog132 Version 1.3.2 (080401) * * - Added call to ReconfigureUSART() in USBtoSerial SetLineCoding request, so that baud rate changes * are reflected in the hardware @@ -1296,7 +1420,7 @@ * - Added MANUAL_PLL_CONTROL compile time option to prevent the USB library from manipulating the PLL * * - * \section Sec_ChangeLog131 Version 1.3.1 - Released March 19th 2008 + * \section Sec_ChangeLog131 Version 1.3.1 (080319) * * - Fixed USB to Serial demo - class value in the descriptors was incorrect * - Control endpoint size changed from 64 bytes to 8 bytes to save on USB FIFO RAM and to allow low @@ -1324,7 +1448,7 @@ * - Added missing Pipe_GetCurrentPipe() macro to Pipe.h * * - * \section Sec_ChangeLog130 Version 1.3.0 - Released March 7th 2008 + * \section Sec_ChangeLog130 Version 1.3.0 (080307) * * - Unnecessary control endpoint config removed from device mode * - Fixed device standard request interpreter accidentally processing some class-specific requests @@ -1354,7 +1478,7 @@ * the real high speed mode, which is unavailable on the USB AVRs) * * - * \section Sec_ChangeLog120 Version 1.2.0 - Released February 4th, 2008 + * \section Sec_ChangeLog120 Version 1.2.0 (080204) * * - Added USB_DeviceEnumerationComplete event for host mode * - Added new Scheduler_Init routine to prepare the scheduler, so that tasks can be started and @@ -1372,7 +1496,7 @@ * - Added in alloca macro to common.h, in case the user is using an old version of avr-lib-c missing the macro * * - * \section Sec_ChangeLog130 Version 1.1.0 - Released January 25th 2008 + * \section Sec_ChangeLog110 Version 1.1.0 (080125) * * - Fixed DCONNI interrupt being enabled accidentally after a USB reset * - Fixed DDISCI interrupt not being disabled when a device is not connected