X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/afe6ae14023c7040befe73e49d00077d3425c564..d11ed10c5314c44dc01c06954d1d73d4894cbff8:/LUFA/Drivers/USB/Class/Host/CDC.h diff --git a/LUFA/Drivers/USB/Class/Host/CDC.h b/LUFA/Drivers/USB/Class/Host/CDC.h index 35c2b2716..466f141db 100644 --- a/LUFA/Drivers/USB/Class/Host/CDC.h +++ b/LUFA/Drivers/USB/Class/Host/CDC.h @@ -1,21 +1,21 @@ /* LUFA Library - Copyright (C) Dean Camera, 2009. + Copyright (C) Dean Camera, 2010. dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ /* - Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, and distribute this software - and its documentation for any purpose and without fee is hereby - granted, provided that the above copyright notice appear in all - copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -31,6 +31,10 @@ /** \ingroup Group_USBClassCDC * @defgroup Group_USBClassCDCHost CDC Class Host Mode Driver * + * \section Sec_Dependencies Module Source Dependencies + * The following files must be built with any user project that uses this module: + * - LUFA/Drivers/USB/Class/Host/CDC.c + * * \section Module Description * Host Mode USB Class driver framework interface, for the CDC USB Class driver. * @@ -43,22 +47,254 @@ /* Includes: */ #include "../../USB.h" #include "../Common/CDC.h" + + #include + #include /* Enable C linkage for C++ Compilers: */ #if defined(__cplusplus) extern "C" { #endif - /* Function Prototypes: */ - #if defined(INCLUDE_FROM_CDC_CLASS_HOST_C) - static uint8_t CDC_Host_ProcessConfigDescriptor(void); - static uint8_t DComp_CDC_Host_NextCDCControlInterface(void* CurrentDescriptor); - static uint8_t DComp_CDC_Host_NextCDCDataInterface(void* CurrentDescriptor); - static uint8_t DComp_CDC_Host_NextInterfaceCDCDataEndpoint(void* CurrentDescriptor); - #endif - - void CDC_Host_Task(void); - + /* Public Interface - May be used in end-application: */ + /* Type Defines: */ + /** Class state structure. An instance of this structure should be made within the user application, + * and passed to each of the CDC class driver functions as the CDCInterfaceInfo parameter. This + * stores each CDC interface's configuration and state information. + */ + typedef struct + { + const struct + { + uint8_t DataINPipeNumber; /**< Pipe number of the CDC interface's IN data pipe */ + bool DataINPipeDoubleBank; /** Indicates if the CDC interface's IN data pipe should use double banking */ + + uint8_t DataOUTPipeNumber; /**< Pipe number of the CDC interface's OUT data pipe */ + bool DataOUTPipeDoubleBank; /** Indicates if the CDC interface's OUT data pipe should use double banking */ + + uint8_t NotificationPipeNumber; /**< Pipe number of the CDC interface's IN notification endpoint, if used */ + bool NotificationPipeDoubleBank; /** Indicates if the CDC interface's notification pipe should use double banking */ + } Config; /**< Config data for the USB class interface within the device. All elements in this section + * must be set or the interface will fail to enumerate and operate correctly. + */ + struct + { + bool IsActive; /**< Indicates if the current interface instance is connected to an attached device, valid + * after \ref CDC_Host_ConfigurePipes() is called and the Host state machine is in the + * Configured state + */ + uint8_t ControlInterfaceNumber; /**< Interface index of the CDC-ACM control interface within the attached device */ + + uint16_t DataINPipeSize; /**< Size in bytes of the CDC interface's IN data pipe */ + uint16_t DataOUTPipeSize; /**< Size in bytes of the CDC interface's OUT data pipe */ + uint16_t NotificationPipeSize; /**< Size in bytes of the CDC interface's IN notification pipe, if used */ + + struct + { + uint8_t HostToDevice; /**< Control line states from the host to device, as a set of CDC_CONTROL_LINE_OUT_* + * masks. + */ + uint8_t DeviceToHost; /**< Control line states from the device to host, as a set of CDC_CONTROL_LINE_IN_* + * masks. + */ + } ControlLineStates; + + struct + { + uint32_t BaudRateBPS; /**< Baud rate of the virtual serial port, in bits per second */ + uint8_t CharFormat; /**< Character format of the virtual serial port, a value from the + * CDCDevice_CDC_LineCodingFormats_t enum + */ + uint8_t ParityType; /**< Parity setting of the virtual serial port, a value from the + * CDCDevice_LineCodingParity_t enum + */ + uint8_t DataBits; /**< Bits of data per character of the virtual serial port */ + } LineEncoding; + } State; /**< State data for the USB class interface within the device. All elements in this section + * may be set to initial values, but may also be ignored to default to sane values when + * the interface is enumerated. + */ + } USB_ClassInfo_CDC_Host_t; + + /* Enums: */ + /** Enum for the possible error codes returned by the \ref CDC_Host_ConfigurePipes() function. */ + enum CDCHost_EnumerationFailure_ErrorCodes_t + { + CDC_ENUMERROR_NoError = 0, /**< Configuration Descriptor was processed successfully */ + CDC_ENUMERROR_InvalidConfigDescriptor = 1, /**< The device returned an invalid Configuration Descriptor */ + CDC_ENUMERROR_NoCDCInterfaceFound = 2, /**< A compatible CDC interface was not found in the device's Configuration Descriptor */ + CDC_ENUMERROR_EndpointsNotFound = 3, /**< Compatible CDC endpoints were not found in the device's CDC interface */ + }; + + /* Function Prototypes: */ + /** General management task for a given CDC host class interface, required for the correct operation of the interface. This should + * be called frequently in the main program loop, before the master USB management task \ref USB_USBTask(). + * + * \param[in,out] CDCInterfaceInfo Pointer to a structure containing an CDC Class host configuration and state + */ + void CDC_Host_USBTask(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); + + /** Host interface configuration routine, to configure a given CDC host interface instance using the Configuration + * Descriptor read from an attached USB device. This function automatically updates the given CDC Host instance's + * state values and configures the pipes required to communicate with the interface if it is found within the device. + * This should be called once after the stack has enumerated the attached device, while the host state machine is in + * the Addressed state. + * + * \param[in,out] CDCInterfaceInfo Pointer to a structure containing an CDC Class host configuration and state + * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor + * \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor + * + * \return A value from the \ref CDCHost_EnumerationFailure_ErrorCodes_t enum + */ + uint8_t CDC_Host_ConfigurePipes(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo, uint16_t ConfigDescriptorSize, + void* DeviceConfigDescriptor) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3); + + /** Sets the line encoding for the attached device's virtual serial port. This should be called when the LineEncoding + * values of the interface have been changed to push the new settings to the USB device. + * + * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state + * + * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum + */ + uint8_t CDC_Host_SetLineEncoding(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); + + /** Sends a Serial Control Line State Change notification to the device. This should be called when the virtual serial + * control lines (DTR, RTS, etc.) have changed states. Line states persist until they are cleared via a second + * notification. This should be called each time the CDC class driver's ControlLineStates.HostToDevice value is updated + * to push the new states to the USB device. + * + * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state + * + * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum + */ + uint8_t CDC_Host_SendControlLineStateChange(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); + + /** Sends a given string to the attached USB device, if connected. If a device is not connected when the function is called, the + * string is discarded. Bytes will be queued for transmission to the device until either the pipe bank becomes full, or the + * \ref CDC_Host_Flush() function is called to flush the pending data to the host. This allows for multiple bytes to be + * packed into a single pipe packet, increasing data throughput. + * + * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. + * + * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state + * \param[in] Data Pointer to the string to send to the device + * \param[in] Length Size in bytes of the string to send to the device + * + * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum + */ + uint8_t CDC_Host_SendString(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo, char* Data, const uint16_t Length) + ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2); + + /** Sends a given byte to the attached USB device, if connected. If a device is not connected when the function is called, the + * byte is discarded. Bytes will be queued for transmission to the device until either the pipe bank becomes full, or the + * \ref CDC_Host_Flush() function is called to flush the pending data to the host. This allows for multiple bytes to be + * packed into a single pipe packet, increasing data throughput. + * + * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. + * + * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state + * \param[in] Data Byte of data to send to the device + * + * \return A value from the \ref Pipe_WaitUntilReady_ErrorCodes_t enum + */ + uint8_t CDC_Host_SendByte(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo, const uint8_t Data) ATTR_NON_NULL_PTR_ARG(1); + + /** Determines the number of bytes received by the CDC interface from the device, waiting to be read. + * + * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. + * + * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state + * + * \return Total number of buffered bytes received from the device + */ + uint16_t CDC_Host_BytesReceived(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); + + /** Reads a byte of data from the device. If no data is waiting to be read of if a USB device is not connected, the function + * returns 0. The \ref CDC_Host_BytesReceived() function should be queried before data is received to ensure that no data + * underflow occurs. + * + * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. + * + * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state + * + * \return Next received byte from the device, or 0 if no data received + */ + uint8_t CDC_Host_ReceiveByte(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); + + /** Flushes any data waiting to be sent, ensuring that the send buffer is cleared. + * + * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. + * + * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state + * + * \return A value from the \ref Pipe_WaitUntilReady_ErrorCodes_t enum + */ + uint8_t CDC_Host_Flush(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); + + /** Creates a standard characer stream for the given CDC Device instance so that it can be used with all the regular + * functions in the avr-libc library that accept a FILE stream as a destination (e.g. fprintf). The created + * stream is bidirectional and can be used for both input and output functions. + * + * \note The created stream can be given as stdout if desired to direct the standard output from all functions + * to the given CDC interface. + * + * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state + * \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed + */ + void CDC_Host_CreateStream(USB_ClassInfo_CDC_Host_t* CDCInterfaceInfo, FILE* Stream); + + /** Identical to CDC_Host_CreateStream(), except that reads are blocking until the calling stream function terminates + * the transfer. While blocking, the USB and CDC service tasks are called repeatedly to maintain USB communications. + * + * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state + * \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed + */ + void CDC_Host_CreateBlockingStream(USB_ClassInfo_CDC_Host_t* CDCInterfaceInfo, FILE* Stream); + + /** CDC class driver event for a control line state change on a CDC host interface. This event fires each time the device notifies + * the host of a control line state change (containing the virtual serial control line states, such as DCD) and may be hooked in the + * user program by declaring a handler function with the same name and parameters listed here. The new control line states + * are available in the ControlLineStates.DeviceToHost value inside the CDC host interface structure passed as a parameter, set as + * a mask of CDC_CONTROL_LINE_IN_* masks. + * + * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state + */ + void EVENT_CDC_Host_ControLineStateChanged(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Macros: */ + #define CDC_CONTROL_CLASS 0x02 + #define CDC_CONTROL_SUBCLASS 0x02 + #define CDC_CONTROL_PROTOCOL 0x01 + #define CDC_DATA_CLASS 0x0A + #define CDC_DATA_SUBCLASS 0x00 + #define CDC_DATA_PROTOCOL 0x00 + + #define CDC_FOUND_DATAPIPE_IN (1 << 0) + #define CDC_FOUND_DATAPIPE_OUT (1 << 1) + #define CDC_FOUND_NOTIFICATION_IN (1 << 2) + + /* Function Prototypes: */ + #if defined(INCLUDE_FROM_CDC_CLASS_HOST_C) + static int CDC_Host_putchar(char c, FILE* Stream); + static int CDC_Host_getchar(FILE* Stream); + static int CDC_Host_getchar_Blocking(FILE* Stream); + + void CDC_Host_Event_Stub(void); + void EVENT_CDC_Host_ControLineStateChanged(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo) + ATTR_WEAK ATTR_NON_NULL_PTR_ARG(1) ATTR_ALIAS(CDC_Host_Event_Stub); + static uint8_t DComp_CDC_Host_NextCDCControlInterface(void* const CurrentDescriptor) ATTR_NON_NULL_PTR_ARG(1); + static uint8_t DComp_CDC_Host_NextCDCDataInterface(void* const CurrentDescriptor) ATTR_NON_NULL_PTR_ARG(1); + static uint8_t DComp_CDC_Host_NextCDCInterfaceEndpoint(void* const CurrentDescriptor); + #endif + #endif + /* Disable C linkage for C++ Compilers: */ #if defined(__cplusplus) }