X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/ab195ab1da1da75a3a23d47b56c66d14803a9de3..ceb16ee24f1e6add5e2ad0398369c24d2d868cd8:/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c

diff --git a/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c b/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
index 0ab297538..7b9ff0914 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
@@ -65,7 +65,7 @@ static void TINYNVM_SendReadNVMRegister(const uint8_t Address)
  */
 static void TINYNVM_SendWriteNVMRegister(const uint8_t Address)
 {
-	/* The TPI command for writing to the I/O space uses weird addressing, where the I/O address's upper
+	/* The TPI command for reading from the I/O space uses strange addressing, where the I/O address's upper
 	 * two bits of the 6-bit address are shifted left once */
 	XPROGTarget_SendByte(TPI_CMD_SOUT | ((Address & 0x30) << 1) | (Address & 0x0F));
 }
@@ -81,11 +81,26 @@ bool TINYNVM_WaitWhileNVMBusBusy(void)
 	{
 		/* Send the SLDCS command to read the TPI STATUS register to see the NVM bus is active */
 		XPROGTarget_SendByte(TPI_CMD_SLDCS | TPI_STATUS_REG);
-		if (XPROGTarget_ReceiveByte() & TPI_STATUS_NVM)
+
+		uint8_t StatusRegister = XPROGTarget_ReceiveByte();
+
+		/* We might have timed out waiting for the status register read response, check here */
+		if (!(TimeoutMSRemaining))
+		  return false;
+
+		/* Check the status register read response to see if the NVM bus is enabled */
+		if (StatusRegister & TPI_STATUS_NVM)
 		{
 			TimeoutMSRemaining = COMMAND_TIMEOUT_MS;
 			return true;
 		}
+
+		/* Manage software timeout */
+		if (TIFR0 & (1 << OCF0A))
+		{
+			TIFR0 |= (1 << OCF0A);
+			TimeoutMSRemaining--;
+		}
 	}
 
 	return false;
@@ -104,12 +119,25 @@ bool TINYNVM_WaitWhileNVMControllerBusy(void)
 		/* Send the SIN command to read the TPI STATUS register to see the NVM bus is busy */
 		TINYNVM_SendReadNVMRegister(XPROG_Param_NVMCSRRegAddr);
 
+		uint8_t StatusRegister = XPROGTarget_ReceiveByte();
+
+		/* We might have timed out waiting for the status register read response, check here */
+		if (!(TimeoutMSRemaining))
+		  return false;
+
 		/* Check to see if the BUSY flag is still set */
-		if (!(XPROGTarget_ReceiveByte() & (1 << 7)))
+		if (!(StatusRegister & (1 << 7)))
 		{
 			TimeoutMSRemaining = COMMAND_TIMEOUT_MS;
 			return true;
 		}
+
+		/* Manage software timeout */
+		if (TIFR0 & (1 << OCF0A))
+		{
+			TIFR0 |= (1 << OCF0A);
+			TimeoutMSRemaining--;
+		}
 	}
 
 	return false;