X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/aae20139b90521cf1d1b17fdcb3ff9d42ecdf937..fa1a092901319b3b41bf09e0c4cb9cbbec470d6b:/LUFA/Drivers/Board/LEDs.h

diff --git a/LUFA/Drivers/Board/LEDs.h b/LUFA/Drivers/Board/LEDs.h
index 1def9ea90..c44612522 100644
--- a/LUFA/Drivers/Board/LEDs.h
+++ b/LUFA/Drivers/Board/LEDs.h
@@ -29,6 +29,7 @@
 */
 
 /** \file
+ *  \brief Master include file for the board LEDs driver.
  *
  *  This file is the master dispatch header file for the board-specific LED driver, for boards containing user
  *  controllable LEDs.
@@ -52,7 +53,8 @@
  *  provides an interface to configure, test and change the status of all the board LEDs.
  *
  *  If the BOARD value is set to BOARD_USER, this will include the /Board/Dataflash.h file in the user project
- *  directory. Otherwise, it will include the appropriate built in board driver header file.
+ *  directory. Otherwise, it will include the appropriate built in board driver header file. If the BOARD value
+ *  is set to BOARD_NONE, this driver is silently disabled.
  *
  *  \note To make code as compatible as possible, it is assumed that all boards carry a minimum of four LEDs. If
  *        a board contains less than four LEDs, the remaining LED masks are defined to 0 so as to have no effect.
@@ -84,7 +86,7 @@
 		static inline void LEDs_SetAllLEDs(const uint8_t LEDMask) {};
 		static inline void LEDs_ChangeLEDs(const uint8_t LEDMask, const uint8_t ActiveMask) {};
 		static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) {};
-		static inline uintN_t LEDs_GetLEDs(void) { return 0; }
+		static inline uint8_t LEDs_GetLEDs(void) { return 0; }
 	#elif (BOARD == BOARD_USBKEY)
 		#include "USBKEY/LEDs.h"
 	#elif (BOARD == BOARD_STK525)
@@ -95,18 +97,22 @@
 		#include "RZUSBSTICK/LEDs.h"
 	#elif (BOARD == BOARD_ATAVRUSBRF01)
 		#include "ATAVRUSBRF01/LEDs.h"
-	#elif (BOARD == BOARD_XPLAIN)
-		#include "XPLAIN/LEDs.h"
-	#elif (BOARD == BOARD_XPLAIN_REV1)
+	#elif ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
 		#include "XPLAIN/LEDs.h"
 	#elif (BOARD == BOARD_BUMBLEB)
 		#include "BUMBLEB/LEDs.h"
 	#elif (BOARD == BOARD_EVK527)
-		#include "EVK527/LEDs.h"		
+		#include "EVK527/LEDs.h"
+	#elif (BOARD == BOARD_TEENSY)
+		#include "TEENSY/LEDs.h"
+	#elif (BOARD == BOARD_USBTINYMKII)
+		#include "USBTINYMKII/LEDs.h"
+	#elif (BOARD == BOARD_BENITO)
+		#include "BENITO/LEDs.h"
+	#elif (BOARD == BOARD_JMDBU2)
+		#include "JMDBU2/LEDs.h"
 	#elif (BOARD == BOARD_USER)
 		#include "Board/LEDs.h"
-	#elif (BOARD == BOARD_EVK1101)
-		#include "EVK1101/LEDs.h"
 	#endif
 	
 	#if !defined(LEDS_LED1)
@@ -136,20 +142,20 @@
 		 *
 		 *  \param[in] LEDMask  Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file)
 		 */
-		static inline void LEDs_TurnOnLEDs(const uintN_t LEDMask);
+		static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask);
 
 		/** Turns off the LEDs specified in the given LED mask.
 		 *
 		 *  \param[in] LEDMask  Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file)
 		 */
-		static inline void LEDs_TurnOffLEDs(const uintN_t LEDMask);
+		static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask);
 
 		/** Turns off all LEDs not specified in the given LED mask, and turns on all the LEDs in the given LED
 		 *  mask.
 		 *
 		 *  \param[in] LEDMask  Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file)
 		 */
-		static inline void LEDs_SetAllLEDs(const uintN_t LEDMask);
+		static inline void LEDs_SetAllLEDs(const uint8_t LEDMask);
 
 		/** Turns off all LEDs in the LED mask that are not set in the active mask, and turns on all the LEDs
 		 *  specified in both the LED and active masks.
@@ -157,20 +163,20 @@
 		 *  \param[in] LEDMask     Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file)
 		 *  \param[in] ActiveMask  Mask of whether the LEDs in the LED mask should be turned on or off
 		 */
-		static inline void LEDs_ChangeLEDs(const uintN_t LEDMask, const uintN_t ActiveMask);
+		static inline void LEDs_ChangeLEDs(const uint8_t LEDMask, const uint8_t ActiveMask);
 		
 		/** Toggles all LEDs in the LED mask, leaving all others in their current states.
 		 *
 		 *  \param[in] LEDMask Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file)
 		 */
-		static inline void LEDs_ToggleLEDs(const uintN_t LEDMask);
+		static inline void LEDs_ToggleLEDs(const uint8_t LEDMask);
 
 		/** Returns the status of all the board LEDs; set LED masks in the return value indicate that the
 		 *  corresponding LED is on.
 		 *
 		 *  \return Mask of the board LEDs which are currently turned on
 		 */
-		static inline uintN_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
+		static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
 	#endif
 
 #endif