X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/a8871c7fba73307226bd13e2cad4c840c850e6f1..d881e0cbf691793ab6e5fe24f091549a007e009a:/LUFA/Drivers/USB/Class/Host/Printer.h diff --git a/LUFA/Drivers/USB/Class/Host/Printer.h b/LUFA/Drivers/USB/Class/Host/Printer.h index b6298daae..d9de036a1 100644 --- a/LUFA/Drivers/USB/Class/Host/Printer.h +++ b/LUFA/Drivers/USB/Class/Host/Printer.h @@ -1,21 +1,21 @@ /* LUFA Library - Copyright (C) Dean Camera, 2010. - + Copyright (C) Dean Camera, 2011. + dean [at] fourwalledcubicle [dot] com - www.fourwalledcubicle.com + www.lufa-lib.org */ /* - Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,18 +33,18 @@ * * Host mode driver for the library USB Printer Class driver. * - * \note This file should not be included directly. It is automatically included as needed by the class driver - * dispatch header located in LUFA/Drivers/USB/Class/Printer.h. + * \note This file should not be included directly. It is automatically included as needed by the USB module driver + * dispatch header located in LUFA/Drivers/USB.h. */ /** \ingroup Group_USBClassPrinter - * @defgroup Group_USBClassPrinterHost Printer Class Host Mode Driver + * \defgroup Group_USBClassPrinterHost Printer Class Host Mode Driver * * \section Sec_Dependencies Module Source Dependencies * The following files must be built with any user project that uses this module: * - LUFA/Drivers/USB/Class/Host/Printer.c (Makefile source module name: LUFA_SRC_USBCLASS) * - * \section Module Description + * \section Sec_ModDescription Module Description * Host Mode USB Class driver framework interface, for the Printer USB Class driver. * * @{ @@ -56,7 +56,7 @@ /* Includes: */ #include "../../USB.h" #include "../Common/Printer.h" - + /* Enable C linkage for C++ Compilers: */ #if defined(__cplusplus) extern "C" { @@ -64,7 +64,7 @@ /* Preprocessor Checks: */ #if !defined(__INCLUDE_FROM_PRINTER_DRIVER) - #error Do not include this file directly. Include LUFA/Drivers/Class/Printer.h instead. + #error Do not include this file directly. Include LUFA/Drivers/USB.h instead. #endif /* Public Interface - May be used in end-application: */ @@ -72,7 +72,7 @@ /** \brief Printer Class Host Mode Configuration and State Structure. * * Class state structure. An instance of this structure should be made within the user application, - * and passed to each of the Printer class driver functions as the PRNTInterfaceInfo parameter. This + * and passed to each of the Printer class driver functions as the \c PRNTInterfaceInfo parameter. This * stores each Printer interface's configuration and state information. */ typedef struct @@ -110,27 +110,16 @@ PRNT_ENUMERROR_NoError = 0, /**< Configuration Descriptor was processed successfully. */ PRNT_ENUMERROR_InvalidConfigDescriptor = 1, /**< The device returned an invalid Configuration Descriptor. */ PRNT_ENUMERROR_NoCompatibleInterfaceFound = 2, /**< A compatible Printer interface was not found in the device's Configuration Descriptor. */ + PRNT_ENUMERROR_PipeConfigurationFailed = 3, /**< One or more pipes for the specified interface could not be configured correctly. */ }; - - /* Function Prototypes: */ - /** General management task for a given Printer host class interface, required for the correct operation of - * the interface. This should be called frequently in the main program loop, before the master USB management task - * \ref USB_USBTask(). - * - * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state. - */ - void PRNT_Host_USBTask(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); + /* Function Prototypes: */ /** Host interface configuration routine, to configure a given Printer host interface instance using the * Configuration Descriptor read from an attached USB device. This function automatically updates the given Printer * instance's state values and configures the pipes required to communicate with the interface if it is found within * the device. This should be called once after the stack has enumerated the attached device, while the host state * machine is in the Addressed state. * - * \note The pipe index numbers as given in the interface's configuration structure must not overlap with any other - * interface, or pipe bank corruption will occur. Gaps in the allocated pipe numbers or non-sequential indexes - * within a single interface is allowed, but no two interfaces of any type have have interleaved pipe indexes. - * * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state. * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor. * \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor. @@ -140,7 +129,15 @@ uint8_t PRNT_Host_ConfigurePipes(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo, uint16_t ConfigDescriptorSize, void* DeviceConfigDescriptor) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3); - + + /** General management task for a given Printer host class interface, required for the correct operation of + * the interface. This should be called frequently in the main program loop, before the master USB management task + * \ref USB_USBTask(). + * + * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state. + */ + void PRNT_Host_USBTask(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); + /** Configures the printer to enable Bidirectional mode, if it is not already in this mode. This should be called * once the connected device's configuration has been set, to ensure the printer is ready to accept commands. * @@ -149,9 +146,9 @@ * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum. */ uint8_t PRNT_Host_SetBidirectionalMode(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); - + /** Retrieves the status of the virtual Printer port's inbound status lines. The result can then be masked against the - * PRNT_PORTSTATUS_* macros to determine the printer port's status. + * \c PRNT_PORTSTATUS_* macros to determine the printer port's status. * * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state. * \param[out] PortStatus Location where the retrieved port status should be stored. @@ -181,6 +178,19 @@ */ uint8_t PRNT_Host_Flush(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); + /** Sends the given null terminated string to the attached printer's input endpoint. + * + * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the + * call will fail. + * + * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state. + * \param[in] String Pointer to a null terminated string to send. + * + * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. + */ + uint8_t PRNT_Host_SendString(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo, + void* String) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2); + /** Sends the given raw data stream to the attached printer's input endpoint. This should contain commands that the * printer is able to understand - for example, PCL data. Not all printers accept all printer languages; see * \ref PRNT_Host_GetDeviceID() for details on determining acceptable languages for an attached printer. @@ -194,13 +204,13 @@ * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. */ - uint8_t PRNT_Host_SendString(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo, - void* Buffer, - const uint16_t Length) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2); + uint8_t PRNT_Host_SendData(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo, + void* Buffer, + const uint16_t Length) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2); /** Sends a given byte to the attached USB device, if connected. If a device is not connected when the function is called, the * byte is discarded. Bytes will be queued for transmission to the device until either the pipe bank becomes full, or the - * \ref PRNT_Host_Flush() function is called to flush the pending data to the host. This allows for multiple bytes to be + * \ref PRNT_Host_Flush() function is called to flush the pending data to the host. This allows for multiple bytes to be * packed into a single pipe packet, increasing data throughput. * * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the @@ -226,8 +236,8 @@ * * \return Total number of buffered bytes received from the device. */ - uint16_t PRNT_Host_BytesReceived(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo); - + uint16_t PRNT_Host_BytesReceived(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo); + /** Reads a byte of data from the device. If no data is waiting to be read of if a USB device is not connected, the function * returns a negative value. The \ref PRNT_Host_BytesReceived() function may be queried in advance to determine how many bytes * are currently buffered in the Printer interface's data receive pipe. @@ -240,7 +250,7 @@ * \return Next received byte from the device, or a negative value if no data received. */ int16_t PRNT_Host_ReceiveByte(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo); - + /** Retrieves the attached printer device's ID string, formatted according to IEEE 1284. This string is sent as a * Unicode string from the device and is automatically converted to an ASCII encoded C string by this function, thus * the maximum reportable string length is two less than the size given (to accommodate the Unicode string length @@ -260,22 +270,15 @@ /* Private Interface - For use in library only: */ #if !defined(__DOXYGEN__) - /* Macros: */ - #define PRINTER_CLASS 0x07 - #define PRINTER_SUBCLASS 0x01 - #define PRINTER_PROTOCOL 0x02 - - #define REQ_GetDeviceID 0 - #define REQ_GetPortStatus 1 - #define REQ_SoftReset 2 - /* Function Prototypes: */ - #if defined(__INCLUDE_FROM_PRINTER_CLASS_HOST_C) - static uint8_t DCOMP_PRNT_Host_NextPRNTInterface(void* const CurrentDescriptor) ATTR_NON_NULL_PTR_ARG(1); - static uint8_t DCOMP_PRNT_Host_NextPRNTInterfaceEndpoint(void* const CurrentDescriptor) ATTR_NON_NULL_PTR_ARG(1); + #if defined(__INCLUDE_FROM_PRINTER_HOST_C) + static uint8_t DCOMP_PRNT_Host_NextPRNTInterface(void* const CurrentDescriptor) + ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1); + static uint8_t DCOMP_PRNT_Host_NextPRNTInterfaceEndpoint(void* const CurrentDescriptor) + ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1); #endif #endif - + /* Disable C linkage for C++ Compilers: */ #if defined(__cplusplus) } @@ -284,3 +287,4 @@ #endif /** @} */ +