X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/a2d18e46f8c30391cf3c06f1f93c50cb24d5e1ae..32f2d59bc0aec1e7c6b88301e3bd7a58ddc0c8c8:/LUFA/Drivers/Board/Dataflash.h

diff --git a/LUFA/Drivers/Board/Dataflash.h b/LUFA/Drivers/Board/Dataflash.h
index 2e1336bf6..c9f66054b 100644
--- a/LUFA/Drivers/Board/Dataflash.h
+++ b/LUFA/Drivers/Board/Dataflash.h
@@ -70,44 +70,44 @@
  *      SPI_Init(SPI_SPEED_FCPU_DIV_2 | SPI_ORDER_MSB_FIRST | SPI_SCK_LEAD_FALLING |
  *               SPI_SAMPLE_TRAILING | SPI_MODE_MASTER);
  *      Dataflash_Init();
- *
+ *      
  *      uint8_t WriteBuffer[DATAFLASH_PAGE_SIZE];
  *      uint8_t ReadBuffer[DATAFLASH_PAGE_SIZE];
- *
+ *      
  *      // Fill page write buffer with a repeating pattern
  *      for (uint16_t i = 0; i < DATAFLASH_PAGE_SIZE; i++)
  *        WriteBuffer[i] = (i & 0xFF);
- *
+ *      
  *      // Must select the chip of interest first before operating on it
  *      Dataflash_SelectChip(DATAFLASH_CHIP1);
- *
+ *      
  *      // Write to the Dataflash's first internal memory buffer
  *      printf("Writing data to first dataflash buffer:\r\n");
  *      Dataflash_SendByte(DF_CMD_BUFF1WRITE);
  *      Dataflash_SendAddressBytes(0, 0);
- *
+ *      
  *      for (uint16_t i = 0; i < DATAFLASH_PAGE_SIZE; i++)
  *        Dataflash_SendByte(WriteBuffer[i]);
- *
+ *      
  *      // Commit the Dataflash's first memory buffer to the non-volatile FLASH memory
  *      printf("Committing page to non-volatile memory page index 5:\r\n");
  *      Dataflash_SendByte(DF_CMD_BUFF1TOMAINMEMWITHERASE);
  *      Dataflash_SendAddressBytes(5, 0);
  *      Dataflash_WaitWhileBusy();
- *
+ *      
  *      // Read the page from non-volatile FLASH memory into the Dataflash's second memory buffer
  *      printf("Reading data into second dataflash buffer:\r\n");
  *      Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF2);
  *      Dataflash_SendAddressBytes(5, 0);
  *      Dataflash_WaitWhileBusy();
- *
+ *      
  *      // Read the Dataflash's second internal memory buffer
  *      Dataflash_SendByte(DF_CMD_BUFF2READ);
  *      Dataflash_SendAddressBytes(0, 0);
- *
+ *      
  *      for (uint16_t i = 0; i < DATAFLASH_PAGE_SIZE; i++)
  *        ReadBuffer[i] = Dataflash_ReceiveByte();
- *
+ *      
  *      // Deselect the chip after use
  *      Dataflash_DeselectChip();
  *  \endcode
@@ -123,7 +123,6 @@
 
 	/* Includes: */
 		#include "../../Common/Common.h"
-		#include "../Peripheral/SPI.h"
 
 	/* Enable C linkage for C++ Compilers: */
 		#if defined(__cplusplus)
@@ -148,7 +147,9 @@
 		/* Inline Functions: */
 			/** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
 			 *
-			 *  \note The microcontroller's SPI driver must be initialized before any of the dataflash commands are used.
+			 *  \note The microcontroller's physical interface driver connected to the Dataflash IC must be initialized before
+			 *        any of the dataflash commands are used. This is usually a SPI hardware port, but on some devices/boards may
+			 *        be a USART operating in SPI Master mode.
 			 */
 			static inline void Dataflash_Init(void);