X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/910bca557cbdc34dbc8db9df91d00103ffd73c88..cdd4e11fa8559fc7fbea54f29310f6a2307d075c:/LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h?ds=sidebyside

diff --git a/LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h b/LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h
index 42c026906..8b65e6238 100644
--- a/LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h
+++ b/LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h
@@ -29,7 +29,7 @@
 */
 
 /** \file
- *  \brief Board specific Dataflash driver header for the Atmel XPLAIN.
+ *  \brief Board specific Dataflash driver header for the original Atmel XPLAIN.
  *  \copydetails Group_Dataflash_XPLAIN
  *
  *  \note This file should not be included directly. It is automatically included as needed by the dataflash driver
@@ -38,7 +38,9 @@
 
 /** \ingroup Group_Dataflash
  *  \defgroup Group_Dataflash_XPLAIN XPLAIN
- *  \brief Board specific Dataflash driver header for the Atmel XPLAIN.
+ *  \brief Board specific Dataflash driver header for the original Atmel XPLAIN.
+ *
+ *  \note For the first revision XPLAIN board, compile with <code>BOARD = BOARD_XPLAIN_REV1</code>.
  *
  *  Board specific Dataflash driver header for the Atmel XPLAIN.
  *
@@ -76,20 +78,20 @@
 			/** Mask for the first dataflash chip selected. */
 			#define DATAFLASH_CHIP1                      0
 
-			#if (BOARD == BOARD_XPLAIN_REV1)
-				#define DATAFLASH_PAGE_SIZE              256
-
-				#define DATAFLASH_PAGES                  2048
-			#else
+			#if ((BOARD != BOARD_XPLAIN_REV1) || defined(__DOXYGEN__))
 				/** Internal main memory page size for the board's dataflash ICs. */
 				#define DATAFLASH_PAGE_SIZE              1024
 
 				/** Total number of pages inside each of the board's dataflash ICs. */
 				#define DATAFLASH_PAGES                  8192
+			#else
+				#define DATAFLASH_PAGE_SIZE              256
+
+				#define DATAFLASH_PAGES                  2048
 			#endif
 
 		/* Inline Functions: */
-			/** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC.
+			/** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
 			 *  The microcontroller's SPI driver MUST be initialized before any of the dataflash commands are used.
 			 */
 			static inline void Dataflash_Init(void)
@@ -98,6 +100,38 @@
 				DATAFLASH_CHIPCS_PORT |= DATAFLASH_CHIPCS_MASK;
 			}
 
+			/** Sends a byte to the currently selected dataflash IC, and returns a byte from the dataflash.
+			 *
+			 *  \param[in] Byte of data to send to the dataflash
+			 *
+			 *  \return Last response byte from the dataflash
+			 */
+			static inline uint8_t Dataflash_TransferByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
+			static inline uint8_t Dataflash_TransferByte(const uint8_t Byte)
+			{
+				return SPI_TransferByte(Byte);
+			}
+
+			/** Sends a byte to the currently selected dataflash IC, and ignores the next byte from the dataflash.
+			 *
+			 *  \param[in] Byte of data to send to the dataflash
+			 */
+			static inline void Dataflash_SendByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
+			static inline void Dataflash_SendByte(const uint8_t Byte)
+			{
+				SPI_SendByte(Byte);
+			}
+
+			/** Sends a dummy byte to the currently selected dataflash IC, and returns the next byte from the dataflash.
+			 *
+			 *  \return Last response byte from the dataflash
+			 */
+			static inline uint8_t Dataflash_ReceiveByte(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
+			static inline uint8_t Dataflash_ReceiveByte(void)
+			{
+				return SPI_ReceiveByte();
+			}
+
 			/** Determines the currently selected dataflash chip.
 			 *
 			 *  \return Mask of the currently selected Dataflash chip, either \ref DATAFLASH_NO_CHIP if no chip is selected
@@ -134,7 +168,7 @@
 			 *  are deselected.
 			 *
 			 *  \param[in] PageAddress  Address of the page to manipulate, ranging from
-			 *                          ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1).
+			 *                          0 to ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1).
 			 */
 			static inline void Dataflash_SelectChipFromPage(const uint16_t PageAddress)
 			{
@@ -169,7 +203,7 @@
 			}
 
 			/** Sends a set of page and buffer address bytes to the currently selected dataflash IC, for use with
-			 *  dataflash commands which require a complete 24-byte address.
+			 *  dataflash commands which require a complete 24-bit address.
 			 *
 			 *  \param[in] PageAddress  Page address within the selected dataflash IC
 			 *  \param[in] BufferByte   Address within the dataflash's buffer