X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/9051d3beb0c5c4ec1e33749d8f806f5492fbe742..3c1b28cf5ff16fede61f2abf37d5616f3e661036:/Projects/USBtoSerial/USBtoSerial.c

diff --git a/Projects/USBtoSerial/USBtoSerial.c b/Projects/USBtoSerial/USBtoSerial.c
index 9ce00bf13..7fe67da44 100644
--- a/Projects/USBtoSerial/USBtoSerial.c
+++ b/Projects/USBtoSerial/USBtoSerial.c
@@ -1,13 +1,13 @@
 /*
              LUFA Library
-     Copyright (C) Dean Camera, 2011.
+     Copyright (C) Dean Camera, 2012.
 
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
 */
 
 /*
-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
@@ -37,17 +37,16 @@
 #include "USBtoSerial.h"
 
 /** Circular buffer to hold data from the host before it is sent to the device via the serial port. */
-RingBuffer_t USBtoUSART_Buffer;
+static RingBuffer_t USBtoUSART_Buffer;
 
 /** Underlying data buffer for \ref USBtoUSART_Buffer, where the stored bytes are located. */
-uint8_t      USBtoUSART_Buffer_Data[128];
+static uint8_t      USBtoUSART_Buffer_Data[128];
 
 /** Circular buffer to hold data from the serial port before it is sent to the host. */
-RingBuffer_t USARTtoUSB_Buffer;
+static RingBuffer_t USARTtoUSB_Buffer;
 
 /** Underlying data buffer for \ref USARTtoUSB_Buffer, where the stored bytes are located. */
-uint8_t      USARTtoUSB_Buffer_Data[128];
-
+static uint8_t      USARTtoUSB_Buffer_Data[128];
 
 /** LUFA CDC Class driver interface configuration and state information. This structure is
  *  passed to all CDC Class driver functions, so that multiple instances of the same class
@@ -58,21 +57,28 @@ USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
 		.Config =
 			{
 				.ControlInterfaceNumber         = 0,
-
-				.DataINEndpointNumber           = CDC_TX_EPNUM,
-				.DataINEndpointSize             = CDC_TXRX_EPSIZE,
-				.DataINEndpointDoubleBank       = false,
-
-				.DataOUTEndpointNumber          = CDC_RX_EPNUM,
-				.DataOUTEndpointSize            = CDC_TXRX_EPSIZE,
-				.DataOUTEndpointDoubleBank      = false,
-
-				.NotificationEndpointNumber     = CDC_NOTIFICATION_EPNUM,
-				.NotificationEndpointSize       = CDC_NOTIFICATION_EPSIZE,
-				.NotificationEndpointDoubleBank = false,
+				.DataINEndpoint                 =
+					{
+						.Address                = CDC_TX_EPADDR,
+						.Size                   = CDC_TXRX_EPSIZE,
+						.Banks                  = 1,
+					},
+				.DataOUTEndpoint                =
+					{
+						.Address                = CDC_RX_EPADDR,
+						.Size                   = CDC_TXRX_EPSIZE,
+						.Banks                  = 1,
+					},
+				.NotificationEndpoint           =
+					{
+						.Address                = CDC_NOTIFICATION_EPADDR,
+						.Size                   = CDC_NOTIFICATION_EPSIZE,
+						.Banks                  = 1,
+					},
 			},
 	};
 
+
 /** Main program entry point. This routine contains the overall program flow, including initial
  *  setup of all components and the main program loop.
  */
@@ -97,10 +103,10 @@ int main(void)
 			if (!(ReceivedByte < 0))
 			  RingBuffer_Insert(&USBtoUSART_Buffer, ReceivedByte);
 		}
-		
+
 		/* Check if the UART receive buffer flush timer has expired or the buffer is nearly full */
 		uint16_t BufferCount = RingBuffer_GetCount(&USARTtoUSB_Buffer);
-		if ((TIFR0 & (1 << TOV0)) || (BufferCount > 200))
+		if ((TIFR0 & (1 << TOV0)) || (BufferCount > (uint8_t)(sizeof(USARTtoUSB_Buffer_Data) * .75)))
 		{
 			/* Clear flush timer expiry flag */
 			TIFR0 |= (1 << TOV0);