X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/8f6b4ddf764c3a54e42d00a7502c82c5c3e71b1c..526e398986583e2fb65c0a36a2fbf2ce153446e5:/Demos/Device/Keyboard/Keyboard.c

diff --git a/Demos/Device/Keyboard/Keyboard.c b/Demos/Device/Keyboard/Keyboard.c
index 8c4157a56..33545bff6 100644
--- a/Demos/Device/Keyboard/Keyboard.c
+++ b/Demos/Device/Keyboard/Keyboard.c
@@ -41,11 +41,11 @@
 TASK_LIST
 {
 	#if !defined(INTERRUPT_CONTROL_ENDPOINT)
-	{ Task: USB_USBTask          , TaskStatus: TASK_STOP },
+	{ .Task = USB_USBTask          , .TaskStatus = TASK_STOP },
 	#endif
 	
 	#if !defined(INTERRUPT_DATA_ENDPOINT)
-	{ Task: USB_Keyboard_Report  , TaskStatus: TASK_STOP },
+	{ .Task = USB_Keyboard_Report  , .TaskStatus = TASK_STOP },
 	#endif
 };
 
@@ -193,43 +193,30 @@ EVENT_HANDLER(USB_ConfigurationChanged)
 EVENT_HANDLER(USB_UnhandledControlPacket)
 {
 	/* Handle HID Class specific requests */
-	switch (bRequest)
+	switch (USB_ControlRequest.bRequest)
 	{
 		case REQ_GetReport:
-			if (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
 			{
 				USB_KeyboardReport_Data_t KeyboardReportData;
 
+				Endpoint_ClearSETUP();
+	
 				/* Create the next keyboard report for transmission to the host */
 				CreateKeyboardReport(&KeyboardReportData);
 
-				/* Ignore report type and ID number value */
-				Endpoint_Discard_Word();
-				
-				/* Ignore unused Interface number value */
-				Endpoint_Discard_Word();
-
-				/* Read in the number of bytes in the report to send to the host */
-				uint16_t wLength = Endpoint_Read_Word_LE();
-				
-				/* If trying to send more bytes than exist to the host, clamp the value at the report size */
-				if (wLength > sizeof(KeyboardReportData))
-				  wLength = sizeof(KeyboardReportData);
-
-				Endpoint_ClearControlSETUP();
-	
 				/* Write the report data to the control endpoint */
-				Endpoint_Write_Control_Stream_LE(&KeyboardReportData, wLength);
+				Endpoint_Write_Control_Stream_LE(&KeyboardReportData, sizeof(KeyboardReportData));
 				
 				/* Finalize the stream transfer to send the last packet or clear the host abort */
-				Endpoint_ClearControlOUT();
+				Endpoint_ClearOUT();
 			}
 		
 			break;
 		case REQ_SetReport:
-			if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
+			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
 			{
-				Endpoint_ClearControlSETUP();
+				Endpoint_ClearSETUP();
 				
 				/* Wait until the LED report has been sent by the host */
 				while (!(Endpoint_IsOUTReceived()));
@@ -241,79 +228,73 @@ EVENT_HANDLER(USB_UnhandledControlPacket)
 				ProcessLEDReport(LEDStatus);
 			
 				/* Clear the endpoint data */
-				Endpoint_ClearControlOUT();
+				Endpoint_ClearOUT();
 
 				/* Acknowledge status stage */
 				while (!(Endpoint_IsINReady()));
-				Endpoint_ClearControlIN();
+				Endpoint_ClearIN();
 			}
 			
 			break;
 		case REQ_GetProtocol:
-			if (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
 			{
-				Endpoint_ClearControlSETUP();
+				Endpoint_ClearSETUP();
 				
 				/* Write the current protocol flag to the host */
 				Endpoint_Write_Byte(UsingReportProtocol);
 				
 				/* Send the flag to the host */
-				Endpoint_ClearControlIN();
+				Endpoint_ClearIN();
 
 				/* Acknowledge status stage */
 				while (!(Endpoint_IsOUTReceived()));
-				Endpoint_ClearControlOUT();
+				Endpoint_ClearOUT();
 			}
 			
 			break;
 		case REQ_SetProtocol:
-			if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
+			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
 			{
-				/* Read in the wValue parameter containing the new protocol mode */
-				uint16_t wValue = Endpoint_Read_Word_LE();
-								
-				Endpoint_ClearControlSETUP();
+				Endpoint_ClearSETUP();
 
 				/* Set or clear the flag depending on what the host indicates that the current Protocol should be */
-				UsingReportProtocol = (wValue != 0x0000);
+				UsingReportProtocol = (USB_ControlRequest.wValue != 0x0000);
 
 				/* Acknowledge status stage */
 				while (!(Endpoint_IsINReady()));
-				Endpoint_ClearControlIN();
+				Endpoint_ClearIN();
 			}
 			
 			break;
 		case REQ_SetIdle:
-			if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
+			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
 			{
-				/* Read in the wValue parameter containing the idle period */
-				uint16_t wValue = Endpoint_Read_Word_LE();
-				
-				Endpoint_ClearControlSETUP();
+				Endpoint_ClearSETUP();
 				
 				/* Get idle period in MSB */
-				IdleCount = (wValue >> 8);
+				IdleCount = (USB_ControlRequest.wValue >> 8);
 				
 				/* Acknowledge status stage */
 				while (!(Endpoint_IsINReady()));
-				Endpoint_ClearControlIN();
+				Endpoint_ClearIN();
 			}
 			
 			break;
 		case REQ_GetIdle:
-			if (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
 			{		
-				Endpoint_ClearControlSETUP();
+				Endpoint_ClearSETUP();
 				
 				/* Write the current idle duration to the host */
 				Endpoint_Write_Byte(IdleCount);
 				
 				/* Send the flag to the host */
-				Endpoint_ClearControlIN();
+				Endpoint_ClearIN();
 
 				/* Acknowledge status stage */
 				while (!(Endpoint_IsOUTReceived()));
-				Endpoint_ClearControlOUT();
+				Endpoint_ClearOUT();
 			}
 
 			break;