X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/8d494808919315ec4aaeb3f568e61cb93031d956..53eca61d02f296262011b802e80f145329ace34b:/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c

diff --git a/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c b/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
index e3e43dd50..c7e64a5eb 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
@@ -143,9 +143,9 @@ bool TINYNVM_ReadMemory(const uint16_t ReadAddress, uint8_t* ReadBuffer, uint16_
 
 /** Writes word addressed memory to the target's memory spaces.
  *
- *  \param[in]  WriteAddress  Start address to write to within the target's address space
- *  \param[in]  WriteBuffer   Buffer to source data from
- *  \param[in]  WriteLength   Total number of bytes to write to the device (must be an integer multiple of 2)
+ *  \param[in] WriteAddress  Start address to write to within the target's address space
+ *  \param[in] WriteBuffer   Buffer to source data from
+ *  \param[in] WriteLength   Total number of bytes to write to the device (must be an integer multiple of 2)
  *
  *  \return Boolean true if the command sequence complete successfully
  */
@@ -189,17 +189,25 @@ bool TINYNVM_WriteMemory(const uint16_t WriteAddress, uint8_t* WriteBuffer, uint
 
 /** Erases the target's memory space.
  *
+ *  \param[in] EraseCommand  NVM erase command to send to the device
+ *  \param[in] Address       Address inside the memory space to erase
+ *
  *  \return Boolean true if the command sequence complete successfully
  */
-bool TINYNVM_EraseMemory(void)
+bool TINYNVM_EraseMemory(const uint8_t EraseCommand, const uint16_t Address)
 {
 	/* Wait until the NVM controller is no longer busy */
 	if (!(TINYNVM_WaitWhileNVMControllerBusy()))
 	  return false;
 
-	/* Set the NVM control register to the CHIP ERASE command to erase the target */
+	/* Set the NVM control register to the target memory erase command */
 	TINYNVM_SendWriteNVMRegister(XPROG_Param_NVMCMDRegAddr);
-	XPROGTarget_SendByte(TINY_NVM_CMD_CHIPERASE);	
+	XPROGTarget_SendByte(EraseCommand);
+
+	/* Write to a location within the target address space to start the erase process */
+	TINYNVM_SendPointerAddress(Address);
+	XPROGTarget_SendByte(TPI_CMD_SST | TPI_POINTER_INDIRECT);
+	XPROGTarget_SendByte(0x00);
 
 	/* Wait until the NVM bus is ready again */
 	if (!(TINYNVM_WaitWhileNVMBusBusy()))