X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/8ba51f090f7cafb36e1108cc58e68f5d71bc13c0..4f74075fad7f1e7a35d04ff534d9d6a57d2b97fc:/LUFA/Drivers/USB/Class/Host/Printer.h?ds=inline

diff --git a/LUFA/Drivers/USB/Class/Host/Printer.h b/LUFA/Drivers/USB/Class/Host/Printer.h
index d61eb4a71..f4fa860dc 100644
--- a/LUFA/Drivers/USB/Class/Host/Printer.h
+++ b/LUFA/Drivers/USB/Class/Host/Printer.h
@@ -66,7 +66,10 @@
 				const struct
 				{
 					uint8_t  DataINPipeNumber; /**< Pipe number of the Printer interface's IN data pipe */
+					bool     DataINPipeDoubleBank; /** Indicates if the Printer interface's IN data pipe should use double banking */
+
 					uint8_t  DataOUTPipeNumber; /**< Pipe number of the Printer interface's OUT data pipe */
+					bool     DataOUTPipeDoubleBank; /** Indicates if the Printer interface's OUT data pipe should use double banking */
 				} Config; /**< Config data for the USB class interface within the device. All elements in this section
 				           *   <b>must</b> be set or the interface will fail to enumerate and operate correctly.
 				           */
@@ -119,7 +122,7 @@
 			 *  \return A value from the \ref PRNTHost_EnumerationFailure_ErrorCodes_t enum
 			 */
 			uint8_t PRNT_Host_ConfigurePipes(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo, uint16_t ConfigDescriptorSize,
-			                                 uint8_t* DeviceConfigDescriptor) ATTR_NON_NULL_PTR_ARG(1, 3);
+			                                 void* DeviceConfigDescriptor) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3);
 			
 			/** Configures the printer to enable Bidirectional mode, if it is not already in this mode. This should be called
 			 *  once the connected device's configuration has been set, to ensure the printer is ready to accept commands.
@@ -139,7 +142,7 @@
 			 *  \return A value from the \ref USB_Host_SendControlErrorCodes_t enum
 			 */
 			uint8_t PRNT_Host_GetPortStatus(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo, uint8_t* const PortStatus)
-			                                ATTR_NON_NULL_PTR_ARG(1, 2);
+			                                ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
 
 			/** Soft-resets the attached printer, readying it for new commands.
 			 *
@@ -160,11 +163,11 @@
 			 *  \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum
 			 */
 			uint8_t PRNT_Host_SendData(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo, void* PrinterCommands, 
-			                           uint16_t CommandSize) ATTR_NON_NULL_PTR_ARG(1, 2);
+			                           uint16_t CommandSize) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
 
 			/** Retrieves the attached printer device's ID string, formatted according to IEEE 1284. This string is sent as a
 			 *  Unicode string from the device and is automatically converted to an ASCII encoded C string by this function, thus
-			 *  the maximum reportable string length is two less than the size given (to accomodate the Unicode string length
+			 *  the maximum reportable string length is two less than the size given (to accommodate the Unicode string length
 			 *  bytes which are removed).
 			 *
 			 *  This string, when supported, contains the model, manufacturer and acceptable printer languages for the attached device.