X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/84c3c4a3d90e7f890c61d4640c2d65a469b42b79..d11ed10c5314c44dc01c06954d1d73d4894cbff8:/LUFA/Drivers/USB/Class/Host/HID.h
diff --git a/LUFA/Drivers/USB/Class/Host/HID.h b/LUFA/Drivers/USB/Class/Host/HID.h
index 1959fd265..3aaf809fd 100644
--- a/LUFA/Drivers/USB/Class/Host/HID.h
+++ b/LUFA/Drivers/USB/Class/Host/HID.h
@@ -1,21 +1,21 @@
/*
LUFA Library
- Copyright (C) Dean Camera, 2009.
+ Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
- Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, and distribute this software
- and its documentation for any purpose and without fee is hereby
- granted, provided that the above copyright notice appear in all
- copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
+ Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@@ -34,6 +34,7 @@
* \section Sec_Dependencies Module Source Dependencies
* The following files must be built with any user project that uses this module:
* - LUFA/Drivers/USB/Class/Host/HID.c
+ * - LUFA/Drivers/USB/Class/Host/HIDParser.c
*
* \section Module Description
* Host Mode USB Class driver framework interface, for the HID USB Class driver.
@@ -47,6 +48,7 @@
/* Includes: */
#include "../../USB.h"
#include "../Common/HID.h"
+ #include "HIDParser.h"
/* Enable C linkage for C++ Compilers: */
#if defined(__cplusplus)
@@ -54,6 +56,10 @@
#endif
/* Public Interface - May be used in end-application: */
+ /* Macros: */
+ /** Error code for some HID Host functions, indicating a logical (and not hardware) error */
+ #define HID_ERROR_LOGICAL 0x80
+
/* Type Defines: */
/** Class state structure. An instance of this structure should be made within the user application,
* and passed to each of the HID class driver functions as the HIDInterfaceInfo parameter. This
@@ -64,17 +70,48 @@
const struct
{
uint8_t DataINPipeNumber; /**< Pipe number of the HID interface's IN data pipe */
+ bool DataINPipeDoubleBank; /** Indicates if the HID interface's IN data pipe should use double banking */
+
uint8_t DataOUTPipeNumber; /**< Pipe number of the HID interface's OUT data pipe */
-
- bool MatchInterfaceProtocol;
- uint8_t HIDInterfaceProtocol;
+ bool DataOUTPipeDoubleBank; /** Indicates if the HID interface's OUT data pipe should use double banking */
+
+ uint8_t HIDInterfaceProtocol; /**< HID interface protocol value to match against if a specific
+ * boot subclass protocol is required, either \ref HID_BOOT_MOUSE_PROTOCOL,
+ * \ref HID_BOOT_KEYBOARD_PROTOCOL or \ref HID_NON_BOOT_PROTOCOL if any
+ * HID device should be enumerated by the interface
+ */
+ #if !defined(HID_HOST_BOOT_PROTOCOL_ONLY)
+ HID_ReportInfo_t* HIDParserData; /**< HID parser data to store the parsed HID report data, when boot protocol
+ * is not used
+ *
+ * \note When the HID_HOST_BOOT_PROTOCOL_ONLY compile time token is defined,
+ * this method is unavailable.
+ */
+ #endif
} Config; /**< Config data for the USB class interface within the device. All elements in this section
* must be set or the interface will fail to enumerate and operate correctly.
*/
struct
{
+ bool IsActive; /**< Indicates if the current interface instance is connected to an attached device, valid
+ * after \ref HID_Host_ConfigurePipes() is called and the Host state machine is in the
+ * Configured state
+ */
+ uint8_t InterfaceNumber; /**< Interface index of the HID interface within the attached device */
+
uint16_t DataINPipeSize; /**< Size in bytes of the HID interface's IN data pipe */
uint16_t DataOUTPipeSize; /**< Size in bytes of the HID interface's OUT data pipe */
+
+ bool SupportsBootProtocol; /**< Indicates if the current interface instance supports the HID Boot
+ * Protocol when enabled via \ref HID_Host_SetBootProtocol()
+ */
+ bool DeviceUsesOUTPipe; /**< Indicates if the current interface instance uses a separate OUT data pipe for
+ * OUT reports, or if OUT reports are sent via the control pipe instead.
+ */
+ bool UsingBootProtocol; /**< Indicates that the interface is currently initialized in Boot Protocol mode */
+ uint16_t HIDReportSize; /**< Size in bytes of the HID report descriptor in the device */
+
+ uint8_t LargestReportSize; /**< Largest report the device will send, in bytes */
} State; /**< State data for the USB class interface within the device. All elements in this section
* may be set to initial values, but may also be ignored to default to sane values when
* the interface is enumerated.
@@ -82,19 +119,153 @@
} USB_ClassInfo_HID_Host_t;
/* Enums: */
- enum
+ /** Enum for the possible error codes returned by the \ref HID_Host_ConfigurePipes() function. */
+ enum HIDHost_EnumerationFailure_ErrorCodes_t
{
HID_ENUMERROR_NoError = 0, /**< Configuration Descriptor was processed successfully */
HID_ENUMERROR_InvalidConfigDescriptor = 1, /**< The device returned an invalid Configuration Descriptor */
HID_ENUMERROR_NoHIDInterfaceFound = 2, /**< A compatible HID interface was not found in the device's Configuration Descriptor */
- HID_ENUMERROR_EndpointsNotFound = 3, /**< Compatible HID endpoints were not found in the device's CDC interface */
- } CDCHost_EnumerationFailure_ErrorCodes_t;
+ HID_ENUMERROR_NoHIDDescriptorFound = 3, /**< The HID descriptor was not found in the device's HID interface */
+ HID_ENUMERROR_EndpointsNotFound = 4, /**< Compatible HID endpoints were not found in the device's HID interface */
+ };
/* Function Prototypes: */
- void HID_Host_USBTask(USB_ClassInfo_HID_Host_t* HIDInterfaceInfo);
- uint8_t HID_Host_ConfigurePipes(USB_ClassInfo_HID_Host_t* HIDInterfaceInfo, uint16_t ConfigDescriptorLength,
- uint8_t* DeviceConfigDescriptor);
-
+ /** Host interface configuration routine, to configure a given HID host interface instance using the Configuration
+ * Descriptor read from an attached USB device. This function automatically updates the given HID Host instance's
+ * state values and configures the pipes required to communicate with the interface if it is found within the
+ * device. This should be called once after the stack has enumerated the attached device, while the host state
+ * machine is in the Addressed state.
+ *
+ * \note Once the device pipes are configured, the HID device's reporting protocol must be set via a call
+ * to either the \ref HID_Host_SetBootProtocol() or \ref HID_Host_SetReportProtocol() function.
+ *
+ * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state
+ * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor
+ * \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor
+ *
+ * \return A value from the \ref HIDHost_EnumerationFailure_ErrorCodes_t enum
+ */
+ uint8_t HID_Host_ConfigurePipes(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo, uint16_t ConfigDescriptorSize,
+ void* DeviceConfigDescriptor) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3);
+
+
+ /** Receives a HID IN report from the attached HID device, when a report has been received on the HID IN Data pipe.
+ *
+ * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
+ * call will fail.
+ *
+ * \note The destination buffer should be large enough to accommodate the largest report that the attached device
+ * can generate.
+ *
+ * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state
+ * \param[in] Buffer Buffer to store the received report into
+ *
+ * \return An error code from the \ref Pipe_Stream_RW_ErrorCodes_t enum
+ */
+ uint8_t HID_Host_ReceiveReport(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo, void* Buffer)
+ ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
+
+ #if !defined(HID_HOST_BOOT_PROTOCOL_ONLY)
+ /** Receives a HID IN report from the attached device, by the report ID.
+ *
+ * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
+ * call will fail.
+ *
+ * \note When the HID_HOST_BOOT_PROTOCOL_ONLY compile time token is defined, this method is unavailable.
+ *
+ * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state
+ * \param[in] ReportID Report ID of the received report if ControlRequest is false, set by the to the Report ID to fetch
+ * \param[in] Buffer Buffer to store the received report into
+ *
+ * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum
+ */
+ uint8_t HID_Host_ReceiveReportByID(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo, const uint8_t ReportID,
+ void* Buffer) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3);
+ #endif
+
+ /** Sends an OUT report to the currently attached HID device, using the device's OUT pipe if available or the device's
+ * Control pipe if not.
+ *
+ * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
+ * call will fail.
+ *
+ * \note When the HID_HOST_BOOT_PROTOCOL_ONLY compile time token is defined, the ReportID parameter is removed
+ * from the parameter list of this function.
+ *
+ * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state
+ * \param[in] ReportID Report ID of the report to send to the device, or 0 if the device does not use report IDs
+ * \param[in] Buffer Buffer containing the report to send to the attached device
+ * \param[in] ReportSize Report size in bytes to send to the attached device
+ *
+ * \return An error code from the \ref USB_Host_SendControlErrorCodes_t enum if the DeviceUsesOUTPipe flag is set in
+ * the interface's state structure, a value from the \ref Pipe_Stream_RW_ErrorCodes_t enum otherwise
+ */
+ uint8_t HID_Host_SendReportByID(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo,
+ #if !defined(HID_HOST_BOOT_PROTOCOL_ONLY)
+ const uint8_t ReportID,
+ #endif
+ void* Buffer, const uint16_t ReportSize) ATTR_NON_NULL_PTR_ARG(1)
+ #if !defined(HID_HOST_BOOT_PROTOCOL_ONLY)
+ ATTR_NON_NULL_PTR_ARG(3);
+ #else
+ ATTR_NON_NULL_PTR_ARG(2);
+ #endif
+
+ /** Determines if a HID IN report has been received from the attached device on the data IN pipe.
+ *
+ * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
+ * call will fail.
+ *
+ * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state
+ *
+ * \return Boolean true if a report has been received, false otherwise
+ */
+ bool HID_Host_IsReportReceived(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Switches the attached HID device's reporting protocol over to the Boot Report protocol mode, on supported devices.
+ *
+ * \note When the HID_HOST_BOOT_PROTOCOL_ONLY compile time token is defined, this method must still be called
+ * to explicitly place the attached device into boot protocol mode before use.
+ *
+ * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state
+ *
+ * \return \ref HID_ERROR_LOGICAL if the device does not support Boot Protocol mode, a value from the
+ * \ref USB_Host_SendControlErrorCodes_t enum otherwise
+ */
+ uint8_t HID_Host_SetBootProtocol(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+
+ #if !defined(HID_HOST_BOOT_PROTOCOL_ONLY)
+ /** Switches the attached HID device's reporting protocol over to the standard Report protocol mode. This also retrieves
+ * and parses the device's HID report descriptor, so that the size of each report can be determined in advance.
+ *
+ * \note Whether this function is used or not, the \ref CALLBACK_HIDParser_FilterHIDReportItem() callback from the HID
+ * Report Parser this function references must be implemented in the user code.
+ *
+ * \note When the HID_HOST_BOOT_PROTOCOL_ONLY compile time token is defined, this method is unavailable.
+ *
+ * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state
+ *
+ * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum if an error occurs while retrieving the HID
+ * Report descriptor or the setting of the Report protocol, \ref HID_ERROR_LOGICAL if the HID interface does
+ * not have a valid \ref HID_ReportInfo_t structure set in its configuration, a mask of \ref HID_ERROR_LOGICAL
+ * and a value from the \ref HID_Parse_ErrorCodes_t otherwise
+ */
+ uint8_t HID_Host_SetReportProtocol(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+ #endif
+
+ /* Inline Functions: */
+ /** General management task for a given Human Interface Class host class interface, required for the correct operation of
+ * the interface. This should be called frequently in the main program loop, before the master USB management task
+ * \ref USB_USBTask().
+ *
+ * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state
+ */
+ static inline void HID_Host_USBTask(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo);
+ static inline void HID_Host_USBTask(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo)
+ {
+ (void)HIDInterfaceInfo;
+ }
+
/* Private Interface - For use in library only: */
#if !defined(__DOXYGEN__)
/* Macros: */
@@ -105,8 +276,9 @@
/* Function Prototypes: */
#if defined(INCLUDE_FROM_HID_CLASS_HOST_C)
- static uint8_t DComp_HID_Host_NextHIDInterface(void* CurrentDescriptor);
- static uint8_t DComp_HID_Host_NextInterfaceHIDDataEndpoint(void* CurrentDescriptor);
+ static uint8_t DComp_HID_Host_NextHIDInterface(void* const CurrentDescriptor) ATTR_NON_NULL_PTR_ARG(1);
+ static uint8_t DComp_NextHID(void* const CurrentDescriptor) ATTR_NON_NULL_PTR_ARG(1);
+ static uint8_t DComp_HID_Host_NextHIDInterfaceEndpoint(void* const CurrentDescriptor) ATTR_NON_NULL_PTR_ARG(1);
#endif
#endif