X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/7f81803aaa312d589f79a77d1426150dcceb29f7..e0af6014a746b1ef0707d388a58bcf77b9ea47f1:/LUFA/Drivers/USB/LowLevel/Pipe.h diff --git a/LUFA/Drivers/USB/LowLevel/Pipe.h b/LUFA/Drivers/USB/LowLevel/Pipe.h index 30f2d387c..cf61eeae0 100644 --- a/LUFA/Drivers/USB/LowLevel/Pipe.h +++ b/LUFA/Drivers/USB/LowLevel/Pipe.h @@ -187,13 +187,13 @@ /** Selects the given pipe number. Any pipe operations which do not require the pipe number to be * indicated will operate on the currently selected pipe. * - * \param PipeNumber Index of the pipe to select + * \param[in] PipeNumber Index of the pipe to select */ static inline void Pipe_SelectPipe(uint8_t PipeNumber); /** Resets the desired pipe, including the pipe banks and flags. * - * \param PipeNumber Index of the pipe to reset + * \param[in] PipeNumber Index of the pipe to reset */ static inline void Pipe_ResetPipe(uint8_t PipeNumber); @@ -226,7 +226,7 @@ * control requests, or on regular pipes to allow for half-duplex bidirectional data transfer to devices * which have two endpoints of opposite direction sharing the same endpoint address within the device. * - * \param Token New pipe token to set the selected pipe to, as a PIPE_TOKEN_* mask + * \param[in] Token New pipe token to set the selected pipe to, as a PIPE_TOKEN_* mask */ static inline void Pipe_SetPipeToken(uint8_t Token); @@ -236,7 +236,7 @@ /** Configures the currently selected pipe to only allow the specified number of IN requests to be * accepted by the pipe before it is automatically frozen. * - * \param TotalINRequests Total number of IN requests that the pipe may receive before freezing + * \param[in] TotalINRequests Total number of IN requests that the pipe may receive before freezing */ static inline void Pipe_SetFiniteINRequests(uint8_t TotalINRequests); @@ -248,7 +248,7 @@ /** Sets the period between interrupts for an INTERRUPT type pipe to a specified number of milliseconds. * - * \param Milliseconds Number of milliseconds between each pipe poll + * \param[in] Milliseconds Number of milliseconds between each pipe poll */ static inline void Pipe_SetInterruptPeriod(uint8_t Milliseconds); @@ -262,7 +262,7 @@ /** Determines if the specified pipe number has interrupted (valid only for INTERRUPT type * pipes). * - * \param PipeNumber Index of the pipe whose interrupt flag should be tested + * \param[in] PipeNumber Index of the pipe whose interrupt flag should be tested * * \return Boolean true if the specified pipe has interrupted, false otherwise */ @@ -516,7 +516,7 @@ * * \ingroup Group_PipeRW * - * \param Byte Next byte to write into the the currently selected pipe's FIFO buffer + * \param[in] Byte Next byte to write into the the currently selected pipe's FIFO buffer */ static inline void Pipe_Write_Byte(const uint8_t Byte) ATTR_ALWAYS_INLINE; static inline void Pipe_Write_Byte(const uint8_t Byte) @@ -577,7 +577,7 @@ * * \ingroup Group_PipeRW * - * \param Word Next word to write to the currently selected pipe's FIFO buffer + * \param[in] Word Next word to write to the currently selected pipe's FIFO buffer */ static inline void Pipe_Write_Word_LE(const uint16_t Word) ATTR_ALWAYS_INLINE; static inline void Pipe_Write_Word_LE(const uint16_t Word) @@ -591,7 +591,7 @@ * * \ingroup Group_PipeRW * - * \param Word Next word to write to the currently selected pipe's FIFO buffer + * \param[in] Word Next word to write to the currently selected pipe's FIFO buffer */ static inline void Pipe_Write_Word_BE(const uint16_t Word) ATTR_ALWAYS_INLINE; static inline void Pipe_Write_Word_BE(const uint16_t Word) @@ -666,7 +666,7 @@ * * \ingroup Group_PipeRW * - * \param DWord Next double word to write to the currently selected pipe's FIFO buffer + * \param[in] DWord Next double word to write to the currently selected pipe's FIFO buffer */ static inline void Pipe_Write_DWord_LE(const uint32_t DWord) ATTR_ALWAYS_INLINE; static inline void Pipe_Write_DWord_LE(const uint32_t DWord) @@ -680,7 +680,7 @@ * * \ingroup Group_PipeRW * - * \param DWord Next double word to write to the currently selected pipe's FIFO buffer + * \param[in] DWord Next double word to write to the currently selected pipe's FIFO buffer */ static inline void Pipe_Write_DWord_BE(const uint32_t DWord) ATTR_ALWAYS_INLINE; static inline void Pipe_Write_DWord_BE(const uint32_t DWord) @@ -732,7 +732,9 @@ * * A newly configured pipe is frozen by default, and must be unfrozen before use via the \ref Pipe_Unfreeze() * before being used. Pipes should be kept frozen unless waiting for data from a device while in IN mode, or - * sending data to the device in OUT mode. + * sending data to the device in OUT mode. IN type pipes are also automatically configured to accept infinite + * numbers of IN requests without automatic freezing - this can be overridden by a call to + * \ref Pipe_SetFiniteINRequests(). * * \note The default control pipe does not have to be manually configured, as it is automatically * configured by the library internally. @@ -769,9 +771,9 @@ * * \ingroup Group_PipeRW * - * \param Buffer Pointer to the source data buffer to read from. - * \param Length Number of bytes to read for the currently selected pipe into the buffer. - * \param Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer. + * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. */ @@ -796,9 +798,9 @@ * * \ingroup Group_PipeRW * - * \param Buffer Pointer to the source data buffer to read from. - * \param Length Number of bytes to read for the currently selected pipe into the buffer. - * \param Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer. + * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. */ @@ -823,8 +825,8 @@ * * \ingroup Group_PipeRW * - * \param Length Number of bytes to send via the currently selected pipe. - * \param Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback + * \param[in] Length Number of bytes to send via the currently selected pipe. + * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. */ @@ -849,9 +851,9 @@ * * \ingroup Group_PipeRW * - * \param Buffer Pointer to the source data buffer to write to. - * \param Length Number of bytes to read for the currently selected pipe to read from. - * \param Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback + * \param[out] Buffer Pointer to the source data buffer to write to. + * \param[in] Length Number of bytes to read for the currently selected pipe to read from. + * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. */ @@ -876,9 +878,9 @@ * * \ingroup Group_PipeRW * - * \param Buffer Pointer to the source data buffer to write to. - * \param Length Number of bytes to read for the currently selected pipe to read from. - * \param Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback + * \param[out] Buffer Pointer to the source data buffer to write to. + * \param[in] Length Number of bytes to read for the currently selected pipe to read from. + * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. */