X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/7e7124e40ba2155c5ee4348701be30d3790edca3..48400df13c7f9f4f0fd8e7f841d49f9502557cb1:/LUFA/Drivers/USB/LowLevel/Endpoint.h

diff --git a/LUFA/Drivers/USB/LowLevel/Endpoint.h b/LUFA/Drivers/USB/LowLevel/Endpoint.h
index d1ad1315a..1b8bade7c 100644
--- a/LUFA/Drivers/USB/LowLevel/Endpoint.h
+++ b/LUFA/Drivers/USB/LowLevel/Endpoint.h
@@ -256,7 +256,7 @@
 			/** Sends an IN packet to the host on the currently selected CONTROL type endpoint. */
 			#define Endpoint_ClearSetupIN()               MACROS{ UEINTX &= ~(1 << TXINI); }MACROE
 
-			/** Acknowedges an OUT packet to the host on the currently selected CONTROL type endpoint, freeing
+			/** Acknowledges an OUT packet to the host on the currently selected CONTROL type endpoint, freeing
 			 *  up the endpoint for the next packet.
 			 */
 			#define Endpoint_ClearSetupOUT()              MACROS{ UEINTX &= ~(1 << RXOUTI); }MACROE
@@ -667,7 +667,7 @@
 			                                ) ATTR_NON_NULL_PTR_ARG(1);
 
 			/** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in little endian,
-			 *  sending full packets to the host as needed. The host OUT acknowedgement is not automatically cleared
+			 *  sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared
 			 *  in both failure and success states; the user is responsible for manually clearing the setup OUT to
 			 *  finalize the transfer via the Endpoint_ClearSetupOUT() macro.
 			 *
@@ -684,7 +684,7 @@
 			uint8_t Endpoint_Write_Control_Stream_LE(const void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
 
 			/** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in big endian,
-			 *  sending full packets to the host as needed. The host OUT acknowedgement is not automatically cleared
+			 *  sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared
 			 *  in both failure and success states; the user is responsible for manually clearing the setup OUT to
 			 *  finalize the transfer via the Endpoint_ClearSetupOUT() macro.
 			 *
@@ -701,7 +701,7 @@
 			uint8_t Endpoint_Write_Control_Stream_BE(const void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
 
 			/** Reads the given number of bytes from the CONTROL endpoint from the given buffer in little endian,
-			 *  discarding fully read packets from the host as needed. The device IN acknowedgement is not
+			 *  discarding fully read packets from the host as needed. The device IN acknowledgement is not
 			 *  automatically sent after success or failure states; the user is responsible for manually sending the
 			 *  setup IN to finalize the transfer via the Endpoint_ClearSetupIN() macro.
 			 *
@@ -718,7 +718,7 @@
 			uint8_t Endpoint_Read_Control_Stream_LE(void* Buffer, uint16_t Length)  ATTR_NON_NULL_PTR_ARG(1);
 
 			/** Reads the given number of bytes from the CONTROL endpoint from the given buffer in big endian,
-			 *  discarding fully read packets from the host as needed. The device IN acknowedgement is not
+			 *  discarding fully read packets from the host as needed. The device IN acknowledgement is not
 			 *  automatically sent after success or failure states; the user is responsible for manually sending the
 			 *  setup IN to finalize the transfer via the Endpoint_ClearSetupIN() macro.
 			 *
@@ -798,8 +798,8 @@
 	/* Private Interface - For use in library only: */
 	#if !defined(__DOXYGEN__)
 		/* Macros: */
-			#define Endpoint_AllocateMemory()              MACROS{ UECFG1X |=  (1 << ALLOC);                  }MACROE
-			#define Endpoint_DeallocateMemory()            MACROS{ UECFG1X &= ~(1 << ALLOC);                  }MACROE
+			#define Endpoint_AllocateMemory()              MACROS{ UECFG1X |=  (1 << ALLOC); }MACROE
+			#define Endpoint_DeallocateMemory()            MACROS{ UECFG1X &= ~(1 << ALLOC); }MACROE
 			
 			#define _ENDPOINT_GET_MAXSIZE(n)               _ENDPOINT_GET_MAXSIZE2(ENDPOINT_DETAILS_EP ## n)
 			#define _ENDPOINT_GET_MAXSIZE2(details)        _ENDPOINT_GET_MAXSIZE3(details)