X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/7dffa15c1670806cc053b9930f341b53e30f7384..1e9e7bc8b88af32f466f7438a06fb8dc96b3035d:/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.c diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.c b/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.c index 563794efe..0eeacdf12 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.c +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.c @@ -1,13 +1,13 @@ /* LUFA Library - Copyright (C) Dean Camera, 2011. + Copyright (C) Dean Camera, 2018. dean [at] fourwalledcubicle [dot] com www.lufa-lib.org */ /* - Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + Copyright 2018 Dean Camera (dean [at] fourwalledcubicle [dot] com) Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted @@ -18,7 +18,7 @@ advertising or publicity pertaining to distribution of the software without specific, written prior permission. - The author disclaim all warranties with regard to this + The author disclaims all warranties with regard to this software, including all implied warranties of merchantability and fitness. In no event shall the author be liable for any special, indirect or consequential damages or any damages @@ -44,19 +44,25 @@ USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface = { .Config = { - .ControlInterfaceNumber = 0, - - .DataINEndpointNumber = CDC_TX_EPNUM, - .DataINEndpointSize = CDC_TXRX_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = CDC_RX_EPNUM, - .DataOUTEndpointSize = CDC_TXRX_EPSIZE, - .DataOUTEndpointDoubleBank = false, - - .NotificationEndpointNumber = CDC_NOTIFICATION_EPNUM, - .NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE, - .NotificationEndpointDoubleBank = false, + .ControlInterfaceNumber = INTERFACE_ID_CDC_CCI, + .DataINEndpoint = + { + .Address = CDC_TX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = CDC_RX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .NotificationEndpoint = + { + .Address = CDC_NOTIFICATION_EPADDR, + .Size = CDC_NOTIFICATION_EPSIZE, + .Banks = 1, + }, }, }; @@ -71,12 +77,13 @@ USB_ClassInfo_HID_Device_t Mouse_HID_Interface = { .Config = { - .InterfaceNumber = 2, - - .ReportINEndpointNumber = MOUSE_EPNUM, - .ReportINEndpointSize = MOUSE_EPSIZE, - .ReportINEndpointDoubleBank = false, - + .InterfaceNumber = INTERFACE_ID_Mouse, + .ReportINEndpoint = + { + .Address = MOUSE_EPADDR, + .Size = MOUSE_EPSIZE, + .Banks = 1, + }, .PrevReportINBuffer = PrevMouseHIDReportBuffer, .PrevReportINBufferSize = sizeof(PrevMouseHIDReportBuffer), }, @@ -91,7 +98,7 @@ int main(void) SetupHardware(); LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); - sei(); + GlobalInterruptEnable(); for (;;) { @@ -109,12 +116,24 @@ int main(void) /** Configures the board hardware and chip peripherals for the demo's functionality. */ void SetupHardware(void) { +#if (ARCH == ARCH_AVR8) /* Disable watchdog if enabled by bootloader/fuses */ MCUSR &= ~(1 << WDRF); wdt_disable(); /* Disable clock division */ clock_prescale_set(clock_div_1); +#elif (ARCH == ARCH_XMEGA) + /* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */ + XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU); + XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL); + + /* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */ + XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ); + XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB); + + PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm; +#endif /* Hardware Initialization */ Joystick_Init(); @@ -194,9 +213,9 @@ void EVENT_USB_Device_StartOfFrame(void) * \param[in,out] ReportID Report ID requested by the host if non-zero, otherwise callback should set to the generated report ID * \param[in] ReportType Type of the report to create, either HID_REPORT_ITEM_In or HID_REPORT_ITEM_Feature * \param[out] ReportData Pointer to a buffer where the created report should be stored - * \param[out] ReportSize Number of bytes written in the report (or zero if no report is to be sent + * \param[out] ReportSize Number of bytes written in the report (or zero if no report is to be sent) * - * \return Boolean true to force the sending of the report, false to let the library determine if it needs to be sent + * \return Boolean \c true to force the sending of the report, \c false to let the library determine if it needs to be sent */ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo, uint8_t* const ReportID, @@ -246,3 +265,20 @@ void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDI // Unused (but mandatory for the HID class driver) in this demo, since there are no Host->Device reports } +/** CDC class driver callback function the processing of changes to the virtual + * control lines sent from the host.. + * + * \param[in] CDCInterfaceInfo Pointer to the CDC class interface configuration structure being referenced + */ +void EVENT_CDC_Device_ControLineStateChanged(USB_ClassInfo_CDC_Device_t *const CDCInterfaceInfo) +{ + /* You can get changes to the virtual CDC lines in this callback; a common + use-case is to use the Data Terminal Ready (DTR) flag to enable and + disable CDC communications in your application when set to avoid the + application blocking while waiting for a host to become ready and read + in the pending data from the USB endpoints. + */ + bool HostReady = (CDCInterfaceInfo->State.ControlLineStates.HostToDevice & CDC_CONTROL_LINE_OUT_DTR) != 0; + + (void)HostReady; +}