X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/7aaf9b2036784fadff048172029d0a2029da0ec9..a509729b2d92b03a3d33ab0e1e1950ff65a96a09:/LUFA/Drivers/USB/Class/Host/Printer.h?ds=sidebyside diff --git a/LUFA/Drivers/USB/Class/Host/Printer.h b/LUFA/Drivers/USB/Class/Host/Printer.h index 6d581dd29..37216081b 100644 --- a/LUFA/Drivers/USB/Class/Host/Printer.h +++ b/LUFA/Drivers/USB/Class/Host/Printer.h @@ -105,7 +105,7 @@ } USB_ClassInfo_PRNT_Host_t; /* Enums: */ - enum PRNTHost_EnumerationFailure_ErrorCodes_t + enum PRNT_Host_EnumerationFailure_ErrorCodes_t { PRNT_ENUMERROR_NoError = 0, /**< Configuration Descriptor was processed successfully. */ PRNT_ENUMERROR_InvalidConfigDescriptor = 1, /**< The device returned an invalid Configuration Descriptor. */ @@ -114,6 +114,14 @@ }; /* Function Prototypes: */ + /** General management task for a given Printer host class interface, required for the correct operation of + * the interface. This should be called frequently in the main program loop, before the master USB management task + * \ref USB_USBTask(). + * + * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state. + */ + void PRNT_Host_USBTask(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); + /** Host interface configuration routine, to configure a given Printer host interface instance using the * Configuration Descriptor read from an attached USB device. This function automatically updates the given Printer * instance's state values and configures the pipes required to communicate with the interface if it is found within @@ -124,7 +132,7 @@ * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor. * \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor. * - * \return A value from the \ref PRNTHost_EnumerationFailure_ErrorCodes_t enum. + * \return A value from the \ref PRNT_Host_EnumerationFailure_ErrorCodes_t enum. */ uint8_t PRNT_Host_ConfigurePipes(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo, uint16_t ConfigDescriptorSize, @@ -159,6 +167,17 @@ */ uint8_t PRNT_Host_SoftReset(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); + /** Flushes any data waiting to be sent, ensuring that the send buffer is cleared. + * + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. + * + * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state. + * + * \return A value from the \ref Pipe_WaitUntilReady_ErrorCodes_t enum. + */ + uint8_t PRNT_Host_Flush(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); + /** Sends the given raw data stream to the attached printer's input endpoint. This should contain commands that the * printer is able to understand - for example, PCL data. Not all printers accept all printer languages; see * \ref PRNT_Host_GetDeviceID() for details on determining acceptable languages for an attached printer. @@ -173,9 +192,25 @@ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. */ uint8_t PRNT_Host_SendString(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo, - void* PrinterCommands, + void* Buffer, const uint16_t Length) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2); + /** Sends a given byte to the attached USB device, if connected. If a device is not connected when the function is called, the + * byte is discarded. Bytes will be queued for transmission to the device until either the pipe bank becomes full, or the + * \ref PRNT_Host_Flush() function is called to flush the pending data to the host. This allows for multiple bytes to be + * packed into a single pipe packet, increasing data throughput. + * + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. + * + * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state. + * \param[in] Data Byte of data to send to the device. + * + * \return A value from the \ref Pipe_WaitUntilReady_ErrorCodes_t enum. + */ + uint8_t PRNT_Host_SendByte(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo, + const uint8_t Data) ATTR_NON_NULL_PTR_ARG(1); + /** Determines the number of bytes received by the printer interface from the device, waiting to be read. This indicates the number * of bytes in the IN pipe bank only, and thus the number of calls to \ref PRNT_Host_ReceiveByte() which are guaranteed to succeed * immediately. If multiple bytes are to be received, they should be buffered by the user application, as the pipe bank will not be @@ -220,19 +255,6 @@ char* const DeviceIDString, const uint16_t BufferSize) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2); - /* Inline Functions: */ - /** General management task for a given Printer host class interface, required for the correct operation of - * the interface. This should be called frequently in the main program loop, before the master USB management task - * \ref USB_USBTask(). - * - * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state. - */ - static inline void PRNT_Host_USBTask(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); - static inline void PRNT_Host_USBTask(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo) - { - (void)PRNTInterfaceInfo; - } - /* Private Interface - For use in library only: */ #if !defined(__DOXYGEN__) /* Macros: */