X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/7655205aac2ae8aca89bcd4e3e056bb20a33414c..c41bbf9fccd99de70c962ec6f7cac15efe06d3df:/Bootloaders/DFU/makefile

diff --git a/Bootloaders/DFU/makefile b/Bootloaders/DFU/makefile
index d6d1bb313..a39a83aec 100644
--- a/Bootloaders/DFU/makefile
+++ b/Bootloaders/DFU/makefile
@@ -9,17 +9,15 @@
 #         LUFA Project Makefile.
 # --------------------------------------
 
-# Starting byte address of the bootloader, as a byte address - computed via the formula
-#   BOOT_START = ((FLASH_SIZE_KB - BOOT_SECTION_SIZE_KB) * 1024)
-#
-# Note that the bootloader size and start address given in AVRStudio is in words and not
-# bytes, and so will need to be doubled to obtain the byte address needed by AVR-GCC.
+# Flash size and bootloader section sizes of the target, in KB. These must
+# match the target's total FLASH size and the bootloader size set in the
+# device's fuses.
 FLASH_SIZE_KB        := 128
 BOOT_SECTION_SIZE_KB := 8
 
-# Formulas used to calculate the starting address of the Bootloader section, and the User Application
-# API jump table (for more information on the latter, see the bootloader documentation). These formulas
-# should not need to be altered - modify the FLASH_SIZE_KB and BOOT_SECTION_KB values above instead.
+# Bootloader address calculations (requires the "bc" unix utility) - do
+# not modify these calculations, but rather modify the depedant values above.
+CALC_ADDRESS_HEX      = $(shell echo "obase=16; $(1)" | bc)
 BOOT_START           := 0x$(shell echo "obase=16; ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024" | bc)
 BOOT_API_TABLESTART  := 0x$(shell echo "obase=16; (($(FLASH_SIZE_KB) * 1024) - 96)" | bc)
 
@@ -42,5 +40,7 @@ all:
 include $(LUFA_PATH)/Build/lufa.core.in
 include $(LUFA_PATH)/Build/lufa.sources.in
 include $(LUFA_PATH)/Build/lufa.build.in
+include $(LUFA_PATH)/Build/lufa.cppcheck.in
 include $(LUFA_PATH)/Build/lufa.doxygen.in
 include $(LUFA_PATH)/Build/lufa.avrdude.in
+include $(LUFA_PATH)/Build/lufa.atprogram.in