X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/70f3d8e933d57e703b978b2387b4781c6fb903ec..c93259fbdbfec154b37fd4c3a4e1b43f5b7265e5:/LUFA/Drivers/Board/LEDs.h

diff --git a/LUFA/Drivers/Board/LEDs.h b/LUFA/Drivers/Board/LEDs.h
index 55920d0a5..6e0805839 100644
--- a/LUFA/Drivers/Board/LEDs.h
+++ b/LUFA/Drivers/Board/LEDs.h
@@ -1,13 +1,13 @@
 /*
              LUFA Library
-     Copyright (C) Dean Camera, 2011.
+     Copyright (C) Dean Camera, 2012.
 
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
 */
 
 /*
-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
@@ -56,14 +56,14 @@
  *  provides an interface to configure, test and change the status of all the board LEDs.
  *
  *  If the \c BOARD value is set to \c BOARD_USER, this will include the \c /Board/LEDs.h file in the user project
- *  directory. Otherwise, it will include the appropriate built in board driver header file. If the BOARD value
+ *  directory. Otherwise, it will include the appropriate built-in board driver header file. If the BOARD value
  *  is set to \c BOARD_NONE, this driver is silently disabled.
  *
  *  For possible \c BOARD makefile values, see \ref Group_BoardTypes.
  *
  *  \note To make code as compatible as possible, it is assumed that all boards carry a minimum of four LEDs. If
  *        a board contains less than four LEDs, the remaining LED masks are defined to 0 so as to have no effect.
- *        If other behaviour is desired, either alias the remaining LED masks to existing LED masks via the -D
+ *        If other behavior is desired, either alias the remaining LED masks to existing LED masks via the -D
  *        switch in the project makefile, or alias them to nothing in the makefile to cause compilation errors when
  *        a non-existing LED is referenced in application code. Note that this means that it is possible to make
  *        compatible code for a board with no LEDs by making a board LED driver (see \ref Page_WritingBoardDrivers)
@@ -76,21 +76,21 @@
  *  \code
  *      // Initialize the board LED driver before first use
  *      LEDs_Init();
- *
+ *      
  *      // Turn on each of the four LEDs in turn
- *      LEDs_SetAllLEDs(LEDS_LED1); 
+ *      LEDs_SetAllLEDs(LEDS_LED1);
  *      Delay_MS(500);
- *      LEDs_SetAllLEDs(LEDS_LED1); 
+ *      LEDs_SetAllLEDs(LEDS_LED2);
  *      Delay_MS(500);
- *      LEDs_SetAllLEDs(LEDS_LED1); 
+ *      LEDs_SetAllLEDs(LEDS_LED3);
  *      Delay_MS(500);
- *      LEDs_SetAllLEDs(LEDS_LED1); 
+ *      LEDs_SetAllLEDs(LEDS_LED4);
  *      Delay_MS(500);
- *
+ *      
  *      // Turn on all LEDs
  *      LEDs_SetAllLEDs(LEDS_ALL_LEDS);
  *      Delay_MS(1000);
- *
+ *      
  *      // Turn on LED 1, turn off LED 2, leaving LEDs 3 and 4 in their current state
  *      LEDs_ChangeLEDs((LEDS_LED1 | LEDS_LED2), LEDS_LED1);
  *  \endcode
@@ -109,6 +109,7 @@
 
 		#if (BOARD == BOARD_NONE)
 			static inline void LEDs_Init(void) {};
+			static inline void LEDs_Disable(void) {};
 			static inline void LEDs_TurnOnLEDs(const uint_reg_t LEDMask) {};
 			static inline void LEDs_TurnOffLEDs(const uint_reg_t LEDMask) {};
 			static inline void LEDs_SetAllLEDs(const uint_reg_t LEDMask) {};
@@ -166,7 +167,7 @@
 		#elif (BOARD == BOARD_EVK1101)
 			#include "UC3/EVK1101/LEDs.h"
 		#elif (BOARD == BOARD_TUL)
-			#include "AVR8/TUL/LEDs.h"	
+			#include "AVR8/TUL/LEDs.h"
 		#elif (BOARD == BOARD_EVK1100)
 			#include "UC3/EVK1100/LEDs.h"
 		#elif (BOARD == BOARD_EVK1104)
@@ -175,6 +176,27 @@
 			#include "XMEGA/A3BU_XPLAINED/LEDs.h"
 		#elif ((BOARD == BOARD_USB2AX) || (BOARD == BOARD_USB2AX_V3))
 			#include "AVR8/USB2AX/LEDs.h"
+		#elif ((BOARD == BOARD_MICROPENDOUS_REV1) || (BOARD == BOARD_MICROPENDOUS_REV2) || \
+		       (BOARD == BOARD_MICROPENDOUS_32U2))
+			#include "AVR8/MICROPENDOUS/LEDs.h"
+		#elif (BOARD == BOARD_B1_XPLAINED)
+			#include "XMEGA/B1_XPLAINED/LEDs.h"
+		#elif (BOARD == BOARD_MULTIO)
+			#include "AVR8/MULTIO/LEDs.h"
+		#elif (BOARD == BOARD_BIGMULTIO)
+			#include "AVR8/BIGMULTIO/LEDs.h"
+		#elif (BOARD == BOARD_DUCE)
+			#include "AVR8/DUCE/LEDs.h"
+		#elif (BOARD == BOARD_OLIMEX32U4)
+			#include "AVR8/OLIMEX32U4/LEDs.h"
+		#elif (BOARD == BOARD_OLIMEXT32U4)
+			#include "AVR8/OLIMEXT32U4/LEDs.h"
+		#elif (BOARD == BOARD_OLIMEXISPMK2)
+			#include "AVR8/OLIMEXISPMK2/LEDs.h"
+		#elif (BOARD == BOARD_LEONARDO)
+			#include "AVR8/LEONARDO/LEDs.h"
+		#elif (BOARD == BOARD_UC3A3_XPLAINED)
+			#include "UC3/UC3A3_XPLAINED/LEDs.h"
 		#else
 			#include "Board/LEDs.h"
 		#endif
@@ -202,9 +224,14 @@
 	#if defined(__DOXYGEN__)
 		/** Initializes the board LED driver so that the LEDs can be controlled. This sets the appropriate port
 		 *  I/O pins as outputs, and sets the LEDs to default to off.
+		 *
+		 *  This must be called before any LED driver functions are used.
 		 */
 		static inline void LEDs_Init(void);
 
+		/** Disables the board LED driver, releasing the I/O pins back to their default high-impedance input mode. */
+		static inline void LEDs_Disable(void);
+
 		/** Turns on the LEDs specified in the given LED mask.
 		 *
 		 *  \param[in] LEDMask  Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file).
@@ -242,7 +269,7 @@
 		/** Returns the status of all the board LEDs; set LED masks in the return value indicate that the
 		 *  corresponding LED is on.
 		 *
-		 *  \return Mask of the board LEDs which are currently turned on.
+		 *  \return Mask of \c LEDS_LED* constants indicating which of the board LEDs are currently turned on.
 		 */
 		static inline uint_reg_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
 	#endif