X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/6b5e684c77e5fa855b609d01e9a07fec296e9257..b2a30cd48a0621b360d23dd430c646d22e943d09:/Projects/AVRISP-MKII/AVRISP-MKII.txt

diff --git a/Projects/AVRISP-MKII/AVRISP-MKII.txt b/Projects/AVRISP-MKII/AVRISP-MKII.txt
index 519a49c7a..eb6431477 100644
--- a/Projects/AVRISP-MKII/AVRISP-MKII.txt
+++ b/Projects/AVRISP-MKII/AVRISP-MKII.txt
@@ -10,10 +10,10 @@
  *
  *  The following list indicates what microcontrollers are compatible with this project.
  *
- *  - Series 7 USB AVRs
- *  - Series 6 USB AVRs
- *  - Series 4 USB AVRs
- *  - Series 2 USB AVRs (8KB versions with reduced features only)
+ *  - Series 7 USB AVRs (AT90USBxxx7)
+ *  - Series 6 USB AVRs (AT90USBxxx6)
+ *  - Series 4 USB AVRs (ATMEGAxxU4)
+ *  - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) - <i>8KB versions with reduced features only</i>
  *
  *  \section SSec_Info USB Information:
  *
@@ -54,9 +54,8 @@
  *  drivers. When prompted, direct your OS to install Atmel's AVRISP-MKII drivers provided with AVRStudio.
  *
  *  Note that this design currently has the following limitations:
- *    - Minimum ISP target clock speed of 500KHz due to hardware SPI module prescaler limitations
  *    - No reversed/shorted target connector detection and notification
- *    - A seperate header is required for each of the ISP, PDI and TPI programming protocols that the user wishes to use
+ *    - A separate header is required for each of the ISP, PDI and TPI programming protocols that the user wishes to use
  *
  *  On AVR models with an ADC converter, AVCC should be tied to 5V (e.g. VBUS) and the VTARGET_ADC_CHANNEL token should be
  *  set to an appropriate ADC channel number in the project makefile for VTARGET detection to operate correctly. On models