X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/6b5e684c77e5fa855b609d01e9a07fec296e9257..3a03da970558de9211fc1a43b12bf69e38854d09:/Projects/Benito/makefile

diff --git a/Projects/Benito/makefile b/Projects/Benito/makefile
index c08f1557f..b6432599e 100644
--- a/Projects/Benito/makefile
+++ b/Projects/Benito/makefile
@@ -66,7 +66,7 @@ MCU = atmega32u2
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = BENITO
+BOARD = BENITO
 
 
 # Processor frequency.
@@ -121,6 +121,7 @@ LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
 LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
 LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
 LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT
 
 LUFA_OPTS += -D AVR_RESET_LINE_PORT="PORTD"
 LUFA_OPTS += -D AVR_RESET_LINE_DDR="DDRD"
@@ -128,6 +129,7 @@ LUFA_OPTS += -D AVR_RESET_LINE_MASK="(1 << 4)"
 LUFA_OPTS += -D AVR_RESET_PULSE_MS=10
 LUFA_OPTS += -D TX_RX_LED_PULSE_MS=30
 LUFA_OPTS += -D PING_PONG_LED_PULSE_MS=100
+LUFA_OPTS += -D RECEIVE_BUFFER_FLUSH_MS=20
 
 
 # Create the LUFA source path variables by including the LUFA root makefile
@@ -497,7 +499,10 @@ end:
 
 # Display size of file.
 HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
-ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf
+ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
+MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
+FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
+
 
 sizebefore:
 	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
@@ -525,7 +530,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
 	dfu-programmer $(MCU) erase
-	dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+	dfu-programmer $(MCU) flash $(TARGET).hex
 	dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -536,7 +541,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
 	$(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-	dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+	dfu-programmer $(MCU) eeprom-flash $(TARGET).eep
 	dfu-programmer $(MCU) reset
 
 
@@ -686,8 +691,8 @@ clean_list :
 	$(REMOVE) $(TARGET).map
 	$(REMOVE) $(TARGET).sym
 	$(REMOVE) $(TARGET).lss
-	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
-	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
+	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
+	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
 	$(REMOVE) $(SRC:.c=.s)
 	$(REMOVE) $(SRC:.c=.d)
 	$(REMOVE) $(SRC:.c=.i)