X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/663f9bd5f5592fb6670fa20cabdc65dea631739d..74fb2d895e3197f9b0204366d7f6f52c9c41b2ff:/Bootloaders/HID/makefile diff --git a/Bootloaders/HID/makefile b/Bootloaders/HID/makefile index 5bbb8708c..b0ae6d6d9 100644 --- a/Bootloaders/HID/makefile +++ b/Bootloaders/HID/makefile @@ -95,7 +95,7 @@ F_USB = $(F_CPU) # Note that the bootloader size and start address given in AVRStudio is in words and not # bytes, and so will need to be doubled to obtain the byte address needed by AVR-GCC. FLASH_SIZE_KB = 128 -BOOT_SECTION_SIZE_KB = 4 +BOOT_SECTION_SIZE_KB = 8 # Formulas used to calculate the starting address of the Bootloader section. These formulas @@ -122,17 +122,7 @@ LUFA_PATH = ../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 -LUFA_OPTS += -D ORDERED_EP_CONFIG -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_RAM_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -LUFA_OPTS += -D NO_INTERNAL_SERIAL -LUFA_OPTS += -D NO_DEVICE_SELF_POWER -LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP -LUFA_OPTS += -D NO_SOF_EVENTS +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -176,7 +166,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. @@ -686,7 +676,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep "warning" ;); then \ + @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete.