X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/64d00efd915b8c3842c4fe93605bf8bc73def030..c757acf1f7f3f45522024af7adf8df71a42a1dc1:/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.txt

diff --git a/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.txt b/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.txt
index c28b61e44..3af62bc5c 100644
--- a/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.txt
+++ b/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.txt
@@ -10,7 +10,7 @@
  *
  *  The following list indicates what microcontrollers are compatible with this demo.
  *
- *  - Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
  *
  *  \section Sec_Info USB Information:
  *
@@ -36,7 +36,7 @@
  *        USBIF Audio 1.0 Data Formats Specification</td>
  *   </tr>
  *   <tr>
- *    <td><b>Usable Speeds:</b></td>
+ *    <td><b>Supported USB Speeds:</b></td>
  *    <td>Full Speed Mode</td>
  *   </tr>
  *  </table>
@@ -63,14 +63,19 @@
  *    <td><b>Description:</b></td>
  *   </tr>
  *   <tr>
+ *    <td>MIC_IN_ADC_CHANNEL</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Sets the ADC channel used by the demo for the input audio samples from an attached microphone.</td>
+ *   </tr>
+ *   <tr>
  *    <td>USE_TEST_TONE</td>
- *    <td>AudioOutputHost.h</td>
+ *    <td>AppConfig.h</td>
  *    <td>When defined, this alters the demo to produce a square wave test tone when the first board button is pressed
  *        instead of sampling the board microphone.</td>
  *   </tr>
  *   <tr>
  *    <td>MICROPHONE_BIASED_TO_HALF_RAIL</td>
- *    <td>AudioOutputHost.h</td>
+ *    <td>AppConfig.h</td>
  *    <td>When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted.</td>
  *   </tr>
  *  </table>