X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/60fd0ff418566d85224f9841037ba01b77acc0d8..331e8dece66e632ef3f91b052674948fd74e62a1:/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c?ds=inline

diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
index 6a2d49e00..0057a675f 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
@@ -143,7 +143,7 @@ static void XPROGProtocol_EnterXPROGMode(void)
 		
 		/* Lower direction change guard time to 8 USART bits */
 		XPROGTarget_SendByte(TPI_CMD_SSTCS | TPI_CTRL_REG);
-		XPROGTarget_SendByte(0x04);		
+		XPROGTarget_SendByte(0x04);
 		
 		/* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */
 		XPROGTarget_SendByte(TPI_CMD_SKEY);	
@@ -270,14 +270,14 @@ static void XPROGProtocol_WriteMemory(void)
 	Endpoint_ClearOUT();
 	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
 
-	/* Assume FLASH page programming by default, as it is the common case */
-	uint8_t WriteCommand     = XMEGA_NVM_CMD_WRITEFLASHPAGE;
-	uint8_t WriteBuffCommand = XMEGA_NVM_CMD_LOADFLASHPAGEBUFF;
-	uint8_t EraseBuffCommand = XMEGA_NVM_CMD_ERASEFLASHPAGEBUFF;
-	bool    PagedMemory      = true;
-
 	if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)
 	{
+		/* Assume FLASH page programming by default, as it is the common case */
+		uint8_t WriteCommand     = XMEGA_NVM_CMD_WRITEFLASHPAGE;
+		uint8_t WriteBuffCommand = XMEGA_NVM_CMD_LOADFLASHPAGEBUFF;
+		uint8_t EraseBuffCommand = XMEGA_NVM_CMD_ERASEFLASHPAGEBUFF;
+		bool    PagedMemory      = true;
+
 		if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_APPL)
 		{
 			WriteCommand     = XMEGA_NVM_CMD_WRITEAPPSECPAGE;
@@ -321,8 +321,6 @@ static void XPROGProtocol_WriteMemory(void)
 	}
 	else
 	{
-		Serial_TxByte((uint8_t)WriteMemory_XPROG_Params.Length);
-	
 		/* Send write command to the TPI device, indicate timeout if occurred */
 		if (!(TINYNVM_WriteMemory(WriteMemory_XPROG_Params.Address, WriteMemory_XPROG_Params.ProgData,
 		      WriteMemory_XPROG_Params.Length)))
@@ -368,8 +366,6 @@ static void XPROGProtocol_ReadMemory(void)
 	}
 	else
 	{
-		Serial_TxByte((uint8_t)ReadMemory_XPROG_Params.Length);
-
 		/* Read the TPI target's memory, indicate timeout if occurred */
 		if (!(TINYNVM_ReadMemory(ReadMemory_XPROG_Params.Address, ReadBuffer, ReadMemory_XPROG_Params.Length)))
 		  ReturnStatus = XPRG_ERR_TIMEOUT;