X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/5f776f4785960c71f3ac0bd8784b33812a9abc90..5cae54154506176d64a581c5b3d9550c901b570c:/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt index 590d35705..c84769ade 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt @@ -1,92 +1,100 @@ -/** \file - * - * This file contains special DoxyGen information for the generation of the main page and other special - * documentation pages. It is not a project source file. - */ - -/** \mainpage Combined Mass Storage and Keyboard Device Demo - * - * \section SSec_Compat Demo Compatibility: - * - * The following list indicates what microcontrollers are compatible with this demo. - * - * - Series 7 USB AVRs - * - Series 6 USB AVRs - * - Series 4 USB AVRs - * - Series 2 USB AVRs - * - * \section SSec_Info USB Information: - * - * The following table gives a rundown of the USB utilization of this demo. - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - *
USB Mode:Device
USB Classes:Mass Storage Device \n - * Human Interface Device
USB Subclasses:Bulk-Only Transport \n - * Keyboard Subclass
Relevant Standards:USBIF Mass Storage Standard \n - * USB Bulk-Only Transport Standard \n - * SCSI Primary Commands Specification \n - * SCSI Block Commands Specification \n - * USBIF HID Specification \n - * USBIF HID Usage Tables
Usable Speeds:Full Speed Mode
- * - * \section SSec_Description Project Description: - * - * Combined Mass Storage and Keyboard demonstration application. This gives a - * simple reference application for implementing a dual class USB Mass Storage - * and USB HID Keyboard device using the basic USB UFI and HID drivers in all - * modern OSes (i.e. no special drivers required). - * - * On start-up the system will automatically enumerate and function as an - * external mass storage device (which may be formatted and used in the same - * manner as commercial USB Mass Storage devices) and a USB keyboard. - * - * You will need to format the mass storage drive upon first run of this - * demonstration - as the device acts only as a data block transport between - * the host and the storage media, it does not matter what file system is used, - * as the data interpretation is performed by the host and not the USB device. - * - * Keys on the USB keyboard can be pressed by moving the board's Joystick. - * - * The USB control endpoint is managed entirely by the library using endpoint - * interrupts, as the INTERRUPT_CONTROL_ENDPOINT option is enabled. This allows for - * the host to reset the Mass Storage device state during long transfers without - * the need for complicated polling logic. - * - * \section SSec_Options Project Options - * - * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. - * - * - * - * - * - * - * - * - * - * - * - * - *
Define Name:Location:Description:
TOTAL_LUNSMassStorage.hTotal number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive - * - this can be set to any positive non-zero amount.
- */ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \mainpage Combined Mass Storage and Keyboard Device Demo + * + * \section Sec_Compat Demo Compatibility: + * + * The following list indicates what microcontrollers are compatible with this demo. + * + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series AU XMEGA AVRs (ATXMEGAxxxAxU) + * \li Series B XMEGA AVRs (ATXMEGAxxxBxU) + * \li Series C XMEGA AVRs (ATXMEGAxxxCxU) + * + * \section Sec_Info USB Information: + * + * The following table gives a rundown of the USB utilization of this demo. + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + *
USB Mode:Device
USB Classes:Mass Storage Device \n + * Human Interface Device
USB Subclasses:Bulk-Only Transport \n + * Keyboard Subclass
Relevant Standards:USBIF Mass Storage Standard \n + * USB Bulk-Only Transport Standard \n + * SCSI Primary Commands Specification \n + * SCSI Block Commands Specification \n + * USBIF HID Specification \n + * USBIF HID Usage Tables
Supported USB Speeds:Full Speed Mode
+ * + * \section Sec_Description Project Description: + * + * Combined Mass Storage and Keyboard demonstration application. This gives a + * simple reference application for implementing a dual class USB Mass Storage + * and USB HID Keyboard device using the basic USB UFI and HID drivers in all + * modern OSes (i.e. no special drivers required). + * + * On start-up the system will automatically enumerate and function as an + * external mass storage device (which may be formatted and used in the same + * manner as commercial USB Mass Storage devices) and a USB keyboard. + * + * You will need to format the mass storage drive upon first run of this + * demonstration - as the device acts only as a data block transport between + * the host and the storage media, it does not matter what file system is used, + * as the data interpretation is performed by the host and not the USB device. + * + * Keys on the USB keyboard can be pressed by moving the board's Joystick. + * + * The USB control endpoint is managed entirely by the library using endpoint + * interrupts, as the INTERRUPT_CONTROL_ENDPOINT option is enabled. This allows for + * the host to reset the Mass Storage device state during long transfers without + * the need for complicated polling logic. + * + * \section Sec_Options Project Options + * + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + */ +
Define Name:Location:Description:
TOTAL_LUNSAppConfig.hTotal number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive - + * this can be set to any positive non-zero amount.
DISK_READ_ONLYAppConfig.hConfiguration define, indicating if the disk should be write protected or not.