X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/5a4def747897c1c6ffbe465506d846c7c686d3e9..c505ba047f8e32bed210b46c65cf465d01a35b77:/Demos/Device/LowLevel/MassStorage/MassStorage.txt

diff --git a/Demos/Device/LowLevel/MassStorage/MassStorage.txt b/Demos/Device/LowLevel/MassStorage/MassStorage.txt
index d72ad7656..8d0488265 100644
--- a/Demos/Device/LowLevel/MassStorage/MassStorage.txt
+++ b/Demos/Device/LowLevel/MassStorage/MassStorage.txt
@@ -6,7 +6,7 @@
 
 /** \mainpage Mass Storage Device Demo
  *
- *  \section SSec_Compat Demo Compatibility:
+ *  \section Sec_Compat Demo Compatibility:
  *
  *  The following list indicates what microcontrollers are compatible with this demo.
  *
@@ -15,7 +15,7 @@
  *  - Series 4 USB AVRs (ATMEGAxxU4)
  *  - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
  *
- *  \section SSec_Info USB Information:
+ *  \section Sec_Info USB Information:
  *
  *  The following table gives a rundown of the USB utilization of this demo.
  *
@@ -45,26 +45,25 @@
  *   </tr>
  *  </table>
  *
- *  \section SSec_Description Project Description:
+ *  \section Sec_Description Project Description:
  *
- *  Dual LUN Mass Storage demonstration application. This gives a simple
- *  reference application for implementing a multiple LUN USB Mass Storage
- *  device using the basic USB UFI drivers in all modern OSes (i.e. no
- *  special drivers required).
+ *  Mass Storage device demonstration application. This gives a simple
+ *  reference application for implementing a USB Mass Storage device using
+ *  the basic USB UFI drivers in all modern OSes (i.e. no special drivers
+ *  required).
  *
  *  On start-up the system will automatically enumerate and function as an
- *  external mass storage device with two LUNs (separate disks) which may
- *  be formatted and used in the same manner as commercial USB Mass Storage
- *  devices.
+ *  external mass storage device which may be formatted and used in the same
+ *  manner as commercial USB Mass Storage devices.
  *
- *  You will need to format the mass storage drives upon first run of this
+ *  You will need to format the mass storage drive upon first run of this
  *  demonstration - as the device acts only as a data block transport between
  *  the host and the storage media, it does not matter what file system is used,
  *  as the data interpretation is performed by the host and not the USB device.
  *
- *  This demo is not restricted to only two LUNs; by changing the TOTAL_LUNS
- *  value in MassStorageDualLUN.h, any number of LUNs can be used (from 1 to
- *  255), with each LUN being allocated an equal portion of the available
+ *  This demo is not restricted to only a single LUN (logical disk); by changing
+ *  the TOTAL_LUNS value in DataflashManager.h, any number of LUNs can be used
+ *  (from 1 to 255), with each LUN being allocated an equal portion of the available
  *  Dataflash memory.
  *
  *  The USB control endpoint is managed entirely by the library using endpoint
@@ -72,7 +71,7 @@
  *  the host to reset the Mass Storage device state during long transfers without
  *  the need for complicated polling logic.
  *
- *  \section SSec_Options Project Options
+ *  \section Sec_Options Project Options
  *
  *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
  *