X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/5a4def747897c1c6ffbe465506d846c7c686d3e9..77a9df36a77d2523dd2bc24fa17f9f04c6c175c5:/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c?ds=inline

diff --git a/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c b/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c
index 22d65ffe7..f4d3d4dd2 100644
--- a/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c
+++ b/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c
@@ -1,13 +1,13 @@
 /*
              LUFA Library
-     Copyright (C) Dean Camera, 2010.
+     Copyright (C) Dean Camera, 2011.
 
   dean [at] fourwalledcubicle [dot] com
-      www.fourwalledcubicle.com
+           www.lufa-lib.org
 */
 
 /*
-  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
@@ -44,10 +44,11 @@
  *  It is possible to completely ignore these value or use other settings as the host is completely unaware of the physical
  *  serial link characteristics and instead sends and receives data in endpoint streams.
  */
-CDC_Line_Coding_t LineEncoding = { .BaudRateBPS = 0,
-                                   .CharFormat  = OneStopBit,
-                                   .ParityType  = Parity_None,
-                                   .DataBits    = 8            };
+static CDC_LineEncoding_t LineEncoding = { .BaudRateBPS = 0,
+                                           .CharFormat  = CDC_LINEENCODING_OneStopBit,
+                                           .ParityType  = CDC_PARITY_None,
+                                           .DataBits    = 8                            };
+
 
 /** Main program entry point. This routine contains the overall program flow, including initial
  *  setup of all components and the main program loop.
@@ -122,38 +123,38 @@ void EVENT_USB_Device_ConfigurationChanged(void)
 	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
 }
 
-/** Event handler for the USB_UnhandledControlRequest event. This is used to catch standard and class specific
- *  control requests that are not handled internally by the USB library (including the CDC control commands,
- *  which are all issued via the control endpoint), so that they can be handled appropriately for the application.
+/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
+ *  the device from the USB host before passing along unhandled control requests to the library for processing
+ *  internally.
  */
-void EVENT_USB_Device_UnhandledControlRequest(void)
+void EVENT_USB_Device_ControlRequest(void)
 {
 	/* Process CDC specific control requests */
 	switch (USB_ControlRequest.bRequest)
 	{
-		case REQ_GetLineEncoding:
+		case CDC_REQ_GetLineEncoding:
 			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
 			{
 				Endpoint_ClearSETUP();
 
 				/* Write the line coding data to the control endpoint */
-				Endpoint_Write_Control_Stream_LE(&LineEncoding, sizeof(CDC_Line_Coding_t));
+				Endpoint_Write_Control_Stream_LE(&LineEncoding, sizeof(CDC_LineEncoding_t));
 				Endpoint_ClearOUT();
 			}
 
 			break;
-		case REQ_SetLineEncoding:
+		case CDC_REQ_SetLineEncoding:
 			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
 			{
 				Endpoint_ClearSETUP();
 
 				/* Read the line coding data in from the host into the global struct */
-				Endpoint_Read_Control_Stream_LE(&LineEncoding, sizeof(CDC_Line_Coding_t));
+				Endpoint_Read_Control_Stream_LE(&LineEncoding, sizeof(CDC_LineEncoding_t));
 				Endpoint_ClearIN();
 			}
 
 			break;
-		case REQ_SetControlLineState:
+		case CDC_REQ_SetControlLineState:
 			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
 			{
 				Endpoint_ClearSETUP();
@@ -180,29 +181,6 @@ void CDC_Task(void)
 	if (USB_DeviceState != DEVICE_STATE_Configured)
 	  return;
 
-#if 0
-	/* NOTE: Here you can use the notification endpoint to send back line state changes to the host, for the special RS-232
-	 *       handshake signal lines (and some error states), via the CONTROL_LINE_IN_* masks and the following code:
-	 */
-	USB_Notification_Header_t Notification = (USB_Notification_Header_t)
-		{
-			.NotificationType = (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE),
-			.Notification     = NOTIF_SerialState,
-			.wValue           = 0,
-			.wIndex           = 0,
-			.wLength          = sizeof(uint16_t),
-		};
-
-	uint16_t LineStateMask;
-
-	// Set LineStateMask here to a mask of CONTROL_LINE_IN_* masks to set the input handshake line states to send to the host
-
-	Endpoint_SelectEndpoint(CDC_NOTIFICATION_EPNUM);
-	Endpoint_Write_Stream_LE(&Notification, sizeof(Notification));
-	Endpoint_Write_Stream_LE(&LineStateMask, sizeof(LineStateMask));
-	Endpoint_ClearIN();
-#endif
-
 	/* Determine if a joystick action has occurred */
 	if (JoyStatus_LCL & JOY_UP)
 	  ReportString = "Joystick Up\r\n";
@@ -226,7 +204,7 @@ void CDC_Task(void)
 		Endpoint_SelectEndpoint(CDC_TX_EPNUM);
 
 		/* Write the String to the Endpoint */
-		Endpoint_Write_Stream_LE(ReportString, strlen(ReportString));
+		Endpoint_Write_Stream_LE(ReportString, strlen(ReportString), NULL);
 
 		/* Remember if the packet to send completely fills the endpoint */
 		bool IsFull = (Endpoint_BytesInEndpoint() == CDC_TXRX_EPSIZE);