X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/5a4def747897c1c6ffbe465506d846c7c686d3e9..5cae54154506176d64a581c5b3d9550c901b570c:/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt

diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt
index f93a5ff49..c84769ade 100644
--- a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt
+++ b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt
@@ -6,16 +6,19 @@
 
 /** \mainpage Combined Mass Storage and Keyboard Device Demo
  *
- *  \section SSec_Compat Demo Compatibility:
+ *  \section Sec_Compat Demo Compatibility:
  *
  *  The following list indicates what microcontrollers are compatible with this demo.
  *
- *  - Series 7 USB AVRs (AT90USBxxx7)
- *  - Series 6 USB AVRs (AT90USBxxx6)
- *  - Series 4 USB AVRs (ATMEGAxxU4)
- *  - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
+ *  \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
+ *  \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
  *
- *  \section SSec_Info USB Information:
+ *  \section Sec_Info USB Information:
  *
  *  The following table gives a rundown of the USB utilization of this demo.
  *
@@ -44,12 +47,12 @@
  *        USBIF HID Usage Tables</td>
  *   </tr>
  *   <tr>
- *    <td><b>Usable Speeds:</b></td>
+ *    <td><b>Supported USB Speeds:</b></td>
  *    <td>Full Speed Mode</td>
  *   </tr>
  *  </table>
  *
- *  \section SSec_Description Project Description:
+ *  \section Sec_Description Project Description:
  *
  *  Combined Mass Storage and Keyboard demonstration application. This gives a
  *  simple reference application for implementing a dual class USB Mass Storage
@@ -72,22 +75,26 @@
  *  the host to reset the Mass Storage device state during long transfers without
  *  the need for complicated polling logic.
  *
- *  \section SSec_Options Project Options
+ *  \section Sec_Options Project Options
  *
  *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
  *
  *  <table>
  *   <tr>
- *    <td><b>Define Name:</b></td>
- *    <td><b>Location:</b></td>
- *    <td><b>Description:</b></td>
+ *    <th><b>Define Name:</b></th>
+ *    <th><b>Location:</b></th>
+ *    <th><b>Description:</b></th>
  *   </tr>
  *   <tr>
  *    <td>TOTAL_LUNS</td>
- *    <td>MassStorage.h</td>
+ *    <td>AppConfig.h</td>
  *    <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive -
  *        this can be set to any positive non-zero amount.</td>
  *   </tr>
- *  </table>
+ *   <tr>
+ *    <td>DISK_READ_ONLY</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Configuration define, indicating if the disk should be write protected or not.</td>
+ *   </tr>
  */