X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/5a4def747897c1c6ffbe465506d846c7c686d3e9..5cae54154506176d64a581c5b3d9550c901b570c:/Demos/Device/ClassDriver/MIDI/MIDI.c

diff --git a/Demos/Device/ClassDriver/MIDI/MIDI.c b/Demos/Device/ClassDriver/MIDI/MIDI.c
index cae7277fd..d49dc4c8c 100644
--- a/Demos/Device/ClassDriver/MIDI/MIDI.c
+++ b/Demos/Device/ClassDriver/MIDI/MIDI.c
@@ -1,13 +1,13 @@
 /*
              LUFA Library
-     Copyright (C) Dean Camera, 2010.
+     Copyright (C) Dean Camera, 2013.
 
   dean [at] fourwalledcubicle [dot] com
-      www.fourwalledcubicle.com
+           www.lufa-lib.org
 */
 
 /*
-  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2013  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
@@ -18,7 +18,7 @@
   advertising or publicity pertaining to distribution of the
   software without specific, written prior permission.
 
-  The author disclaim all warranties with regard to this
+  The author disclaims all warranties with regard to this
   software, including all implied warranties of merchantability
   and fitness.  In no event shall the author be liable for any
   special, indirect or consequential damages or any damages
@@ -44,18 +44,23 @@ USB_ClassInfo_MIDI_Device_t Keyboard_MIDI_Interface =
 	{
 		.Config =
 			{
-				.StreamingInterfaceNumber = 1,
-
-				.DataINEndpointNumber      = MIDI_STREAM_IN_EPNUM,
-				.DataINEndpointSize        = MIDI_STREAM_EPSIZE,
-				.DataINEndpointDoubleBank  = false,
-
-				.DataOUTEndpointNumber     = MIDI_STREAM_OUT_EPNUM,
-				.DataOUTEndpointSize       = MIDI_STREAM_EPSIZE,
-				.DataOUTEndpointDoubleBank = false,
+				.StreamingInterfaceNumber = INTERFACE_ID_AudioStream,
+				.DataINEndpoint           =
+					{
+						.Address          = MIDI_STREAM_IN_EPADDR,
+						.Size             = MIDI_STREAM_EPSIZE,
+						.Banks            = 1,
+					},
+				.DataOUTEndpoint          =
+					{
+						.Address          = MIDI_STREAM_OUT_EPADDR,
+						.Size             = MIDI_STREAM_EPSIZE,
+						.Banks            = 1,
+					},
 			},
 	};
 
+
 /** Main program entry point. This routine contains the overall program flow, including initial
  *  setup of all components and the main program loop.
  */
@@ -64,16 +69,16 @@ int main(void)
 	SetupHardware();
 
 	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	sei();
+	GlobalInterruptEnable();
 
 	for (;;)
 	{
 		CheckJoystickMovement();
 
 		MIDI_EventPacket_t ReceivedMIDIEvent;
-		if (MIDI_Device_ReceiveEventPacket(&Keyboard_MIDI_Interface, &ReceivedMIDIEvent))
+		while (MIDI_Device_ReceiveEventPacket(&Keyboard_MIDI_Interface, &ReceivedMIDIEvent))
 		{
-			if ((ReceivedMIDIEvent.Command == (MIDI_COMMAND_NOTE_ON >> 4)) && (ReceivedMIDIEvent.Data3 > 0))
+			if ((ReceivedMIDIEvent.Event == MIDI_EVENT(0, MIDI_COMMAND_NOTE_ON)) && (ReceivedMIDIEvent.Data3 > 0))
 			  LEDs_SetAllLEDs(ReceivedMIDIEvent.Data2 > 64 ? LEDS_LED1 : LEDS_LED2);
 			else
 			  LEDs_SetAllLEDs(LEDS_NO_LEDS);
@@ -87,12 +92,24 @@ int main(void)
 /** Configures the board hardware and chip peripherals for the demo's functionality. */
 void SetupHardware(void)
 {
+#if (ARCH == ARCH_AVR8)
 	/* Disable watchdog if enabled by bootloader/fuses */
 	MCUSR &= ~(1 << WDRF);
 	wdt_disable();
 
 	/* Disable clock division */
 	clock_prescale_set(clock_div_1);
+#elif (ARCH == ARCH_XMEGA)
+	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
+	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
+	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
+
+	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
+	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
+
+	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
+#endif
 
 	/* Hardware Initialization */
 	Joystick_Init();
@@ -150,8 +167,7 @@ void CheckJoystickMovement(void)
 	{
 		MIDI_EventPacket_t MIDIEvent = (MIDI_EventPacket_t)
 			{
-				.CableNumber = 0,
-				.Command     = (MIDICommand >> 4),
+				.Event       = MIDI_EVENT(0, MIDICommand),
 
 				.Data1       = MIDICommand | Channel,
 				.Data2       = MIDIPitch,
@@ -187,8 +203,8 @@ void EVENT_USB_Device_ConfigurationChanged(void)
 	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
 }
 
-/** Event handler for the library USB Unhandled Control Request event. */
-void EVENT_USB_Device_UnhandledControlRequest(void)
+/** Event handler for the library USB Control Request reception event. */
+void EVENT_USB_Device_ControlRequest(void)
 {
 	MIDI_Device_ProcessControlRequest(&Keyboard_MIDI_Interface);
 }