X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/5712b8dff669dc1947cd7d6f34f13eb9fe6a8d0a..7aecda6fda5bcced68d72b0cf73d00174aa5c7cd:/LUFA/Drivers/Peripheral/SPI.h

diff --git a/LUFA/Drivers/Peripheral/SPI.h b/LUFA/Drivers/Peripheral/SPI.h
index 4ada7935c..722437ea8 100644
--- a/LUFA/Drivers/Peripheral/SPI.h
+++ b/LUFA/Drivers/Peripheral/SPI.h
@@ -33,10 +33,16 @@
  *  Hardware SPI subsystem driver for the supported USB AVRs models.
  */
 
-/** \ingroup Group_SubsystemDrivers
+/** \ingroup Group_PeripheralDrivers
  *  @defgroup Group_SPI SPI Driver - LUFA/Drivers/Peripheral/SPI.h
  *
- *  Functions, macros, variables, enums and types related to the setup of a the SPI port.
+ *  \section Sec_Dependencies Module Source Dependencies
+ *  The following files must be built with any user project that uses this module:
+ *    - None
+ *
+ *  \section Module Description
+ *  Driver for the hardware SPI port available on most AVR models. This module provides
+ *  an easy to use driver for the setup of and transfer of data over the AVR's SPI port.
  *
  *  @{
  */
@@ -55,7 +61,7 @@
 	/* Private Interface - For use in library only: */
 	#if !defined(__DOXYGEN__)
 		/* Macros: */
-			#define SPI_USE_DOUBLESPEED            (1 << 7)
+			#define SPI_USE_DOUBLESPEED            (1 << SPE)
 	#endif
 	
 	/* Public Interface - May be used in end-application: */
@@ -80,29 +86,58 @@
 
 			/** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 128. */
 			#define SPI_SPEED_FCPU_DIV_128         ((1 << SPR1) | (1 << SPR0))
+			
+			/** SPI clock polarity mask for SPI_Init(). Indicates that the SCK should lead on the rising edge. */
+			#define SPI_SCK_LEAD_RISING            (0 << CPOL)
+
+			/** SPI clock polarity mask for SPI_Init(). Indicates that the SCK should lead on the falling edge. */
+			#define SPI_SCK_LEAD_FALLING           (1 << CPOL)
+
+			/** SPI data sample mode mask for SPI_Init(). Indicates that the data should sampled on the leading edge. */
+			#define SPI_SAMPLE_LEADING             (0 << CPHA)
+
+			/** SPI data sample mode mask for SPI_Init(). Indicates that the data should be sampled on the trailing edge. */
+			#define SPI_SAMPLE_TRAILING            (1 << CPHA)
+			
+			/** SPI mode mask for SPI_Init(). Indicates that the SPI interface should be initialized into slave mode. */
+			#define SPI_MODE_SLAVE                 (0 << MSTR)
+
+			/** SPI mode mask for SPI_Init(). Indicates that the SPI interface should be initialized into master mode. */
+			#define SPI_MODE_MASTER                (1 << MSTR)
 
 		/* Inline Functions: */
 			/** Initializes the SPI subsystem, ready for transfers. Must be called before calling any other
 			 *  SPI routines.
 			 *
-			 *  \param PrescalerMask  Prescaler mask to set the SPI clock speed
-			 *  \param Master         If true, sets the SPI system to use master mode, slave if false
+			 *  \param[in] SPIOptions  SPI Options, a mask consisting of one of each of the SPI_SPEED_*,
+			 *                         SPI_SCK_*, SPI_SAMPLE_* and SPI_MODE_* masks
 			 */
-			static inline void SPI_Init(const uint8_t PrescalerMask, const bool Master)
+			static inline void SPI_Init(const uint8_t SPIOptions)
 			{
 				DDRB  |= ((1 << 1) | (1 << 2));
 				PORTB |= ((1 << 0) | (1 << 3));
 				
-				SPCR   = ((1 << SPE) | (Master << MSTR) | (1 << CPOL) | (1 << CPHA) |
-				          (PrescalerMask & ~SPI_USE_DOUBLESPEED));
+				SPCR   = ((1 << SPE) | SPIOptions);
+				
+				if (SPIOptions & SPI_USE_DOUBLESPEED)
+				  SPSR |= (1 << SPI2X);
+				else
+				  SPSR &= ~(1 << SPI2X);
+			}
+			
+			/** Turns off the SPI driver, disabling and returning used hardware to their default configuration. */
+			static inline void SPI_ShutDown(void)
+			{
+				DDRB  &= ~((1 << 1) | (1 << 2));
+				PORTB &= ~((1 << 0) | (1 << 3));
 				
-				if (PrescalerMask & SPI_USE_DOUBLESPEED)
-				  SPSR = (1 << SPI2X);
+				SPCR   = 0;
+				SPSR   = 0;
 			}
 			
 			/** Sends and receives a byte through the SPI interface, blocking until the transfer is complete.
 			 *
-			 *  \param Byte  Byte to send through the SPI interface
+			 *  \param[in] Byte  Byte to send through the SPI interface
 			 *
 			 *  \return Response byte from the attached SPI device
 			 */
@@ -117,7 +152,7 @@
 			/** Sends a byte through the SPI interface, blocking until the transfer is complete. The response
 			 *  byte sent to from the attached SPI device is ignored.
 			 *
-			 *  \param Byte Byte to send through the SPI interface
+			 *  \param[in] Byte Byte to send through the SPI interface
 			 */
 			static inline void SPI_SendByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
 			static inline void SPI_SendByte(const uint8_t Byte)