X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/55538dcef34bc3c0f2ada4767c51d11202ac0678..0019fbd1294ccc9ecb0ac4ddb5d8c71efcf9597f:/LUFA/Drivers/USB/Class/Common/MassStorage.h

diff --git a/LUFA/Drivers/USB/Class/Common/MassStorage.h b/LUFA/Drivers/USB/Class/Common/MassStorage.h
index 01e5c9445..761141b63 100644
--- a/LUFA/Drivers/USB/Class/Common/MassStorage.h
+++ b/LUFA/Drivers/USB/Class/Common/MassStorage.h
@@ -1,13 +1,13 @@
 /*
              LUFA Library
-     Copyright (C) Dean Camera, 2010.
+     Copyright (C) Dean Camera, 2011.
 
   dean [at] fourwalledcubicle [dot] com
-      www.fourwalledcubicle.com
+           www.lufa-lib.org
 */
 
 /*
-  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
@@ -40,7 +40,7 @@
 /** \ingroup Group_USBClassMS
  *  @defgroup Group_USBClassMSCommon  Common Class Definitions
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Constants, Types and Enum definitions that are common to both Device and Host modes for the USB
  *  Mass Storage Class.
  *
@@ -78,6 +78,8 @@
 		/** Mask for a Command Block Wrapper's flags attribute to specify a command with data sent from device-to-host. */
 		#define MS_COMMAND_DIR_DATA_IN                         (1 << 7)
 
+		/** \name SCSI Commands*/
+		//@{
 		/** SCSI Command Code for an INQUIRY command. */
 		#define SCSI_CMD_INQUIRY                               0x12
 
@@ -116,7 +118,10 @@
 
 		/** SCSI Command Code for a MODE SENSE (10) command. */
 		#define SCSI_CMD_MODE_SENSE_10                         0x5A
-
+		//@}
+		
+		/** \name SCSI Sense Key Values */
+		//@{
 		/** SCSI Sense Code to indicate no error has occurred. */
 		#define SCSI_SENSE_KEY_GOOD                            0x00
 
@@ -160,7 +165,10 @@
 
 		/** SCSI Sense Code to indicate that the source data did not match the data read from the medium. */
 		#define SCSI_SENSE_KEY_MISCOMPARE                      0x0E
-
+		//@}
+		
+		/** \name SCSI Additional Sense Codes */
+		//@{
 		/** SCSI Additional Sense Code to indicate no additional sense information is available. */
 		#define SCSI_ASENSE_NO_ADDITIONAL_INFORMATION          0x00
 
@@ -189,7 +197,10 @@
 
 		/** SCSI Additional Sense Code to indicate that no removable medium is inserted into the device. */
 		#define SCSI_ASENSE_MEDIUM_NOT_PRESENT                 0x3A
-
+		//@}
+		
+		/** \name SCSI Additional Sense Key Code Qualifiers */
+		//@{
 		/** SCSI Additional Sense Qualifier Code to indicate no additional sense qualifier information is available. */
 		#define SCSI_ASENSEQ_NO_QUALIFIER                      0x00
 
@@ -203,7 +214,8 @@
 
 		/** SCSI Additional Sense Qualifier Code to indicate that an operation is currently in progress. */
 		#define SCSI_ASENSEQ_OPERATION_IN_PROGRESS             0x07
-
+		//@}
+		
 	/* Enums: */
 		/** Enum for possible Class, Subclass and Protocol values of device and interface descriptors relating to the Mass
 		 *  Storage device class.
@@ -249,7 +261,7 @@
 		 *  Type define for a Command Block Wrapper, used in the Mass Storage Bulk-Only Transport protocol. */
 		typedef struct
 		{
-			uint32_t Signature; /**< Command block signature, must be CBW_SIGNATURE to indicate a valid Command Block. */
+			uint32_t Signature; /**< Command block signature, must be \ref MS_CBW_SIGNATURE to indicate a valid Command Block. */
 			uint32_t Tag; /**< Unique command ID value, to associate a command block wrapper with its command status wrapper. */
 			uint32_t DataTransferLength; /**< Length of the optional data portion of the issued command, in bytes. */
 			uint8_t  Flags; /**< Command block flags, indicating command data direction. */
@@ -264,7 +276,7 @@
 		 */
 		typedef struct
 		{
-			uint32_t Signature; /**< Status block signature, must be CSW_SIGNATURE to indicate a valid Command Status. */
+			uint32_t Signature; /**< Status block signature, must be \ref MS_CSW_SIGNATURE to indicate a valid Command Status. */
 			uint32_t Tag; /**< Unique command ID value, to associate a command block wrapper with its command status wrapper. */
 			uint32_t DataTransferResidue; /**< Number of bytes of data not processed in the SCSI command. */
 			uint8_t  Status; /**< Status code of the issued command - a value from the \ref MS_CommandStatusCodes_t enum. */