X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/53eca61d02f296262011b802e80f145329ace34b..ce8d0424b1a59bb2b0bd3ab8f69f4e4cf8c9930b:/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c?ds=inline

diff --git a/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c b/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
index c7e64a5eb..428469df7 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
@@ -37,7 +37,6 @@
 #include "TINYNVM.h"
 
 #if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__)
-#warning TPI Protocol support is currently incomplete and is not suitable for general use.
 
 /** Sends the given pointer address to the target's TPI pointer register */
 static void TINYNVM_SendPointerAddress(const uint16_t AbsoluteAddress)
@@ -66,7 +65,7 @@ static void TINYNVM_SendReadNVMRegister(const uint8_t Address)
  */
 static void TINYNVM_SendWriteNVMRegister(const uint8_t Address)
 {
-	/* The TPI command for writing to the I/O space uses wierd addressing, where the I/O address's upper
+	/* The TPI command for writing to the I/O space uses weird addressing, where the I/O address's upper
 	 * two bits of the 6-bit address are shifted left once */
 	XPROGTarget_SendByte(TPI_CMD_SOUT | ((Address & 0x30) << 1) | (Address & 0x0F));
 }
@@ -78,14 +77,22 @@ static void TINYNVM_SendWriteNVMRegister(const uint8_t Address)
 bool TINYNVM_WaitWhileNVMBusBusy(void)
 {
 	/* Poll the STATUS register to check to see if NVM access has been enabled */
+	uint8_t TimeoutMSRemaining = 100;
 	while (TimeoutMSRemaining)
 	{
 		/* Send the SLDCS command to read the TPI STATUS register to see the NVM bus is active */
 		XPROGTarget_SendByte(TPI_CMD_SLDCS | TPI_STATUS_REG);
 		if (XPROGTarget_ReceiveByte() & TPI_STATUS_NVM)
 		  return true;
+
+		/* Manage software timeout */
+		if (TIFR0 & (1 << OCF0A))
+		{
+			TIFR0 |= (1 << OCF0A);
+			TimeoutMSRemaining--;
+		}
 	}
-	
+
 	return false;
 }
 
@@ -97,6 +104,7 @@ bool TINYNVM_WaitWhileNVMBusBusy(void)
 bool TINYNVM_WaitWhileNVMControllerBusy(void)
 {
 	/* Poll the STATUS register to check to see if NVM access has been enabled */
+	uint8_t TimeoutMSRemaining = 100;
 	while (TimeoutMSRemaining)
 	{
 		/* Send the SIN command to read the TPI STATUS register to see the NVM bus is busy */
@@ -105,8 +113,15 @@ bool TINYNVM_WaitWhileNVMControllerBusy(void)
 		/* Check to see if the BUSY flag is still set */
 		if (!(XPROGTarget_ReceiveByte() & (1 << 7)))
 		  return true;
+
+		/* Manage software timeout */
+		if (TIFR0 & (1 << OCF0A))
+		{
+			TIFR0 |= (1 << OCF0A);
+			TimeoutMSRemaining--;
+		}
 	}
-	
+
 	return false;
 }
 
@@ -204,13 +219,13 @@ bool TINYNVM_EraseMemory(const uint8_t EraseCommand, const uint16_t Address)
 	TINYNVM_SendWriteNVMRegister(XPROG_Param_NVMCMDRegAddr);
 	XPROGTarget_SendByte(EraseCommand);
 
-	/* Write to a location within the target address space to start the erase process */
-	TINYNVM_SendPointerAddress(Address);
+	/* Write to a high byte location within the target address space to start the erase process */
+	TINYNVM_SendPointerAddress(Address | 0x0001);
 	XPROGTarget_SendByte(TPI_CMD_SST | TPI_POINTER_INDIRECT);
 	XPROGTarget_SendByte(0x00);
 
-	/* Wait until the NVM bus is ready again */
-	if (!(TINYNVM_WaitWhileNVMBusBusy()))
+	/* Wait until the NVM controller is no longer busy */
+	if (!(TINYNVM_WaitWhileNVMControllerBusy()))
 	  return false;
 	
 	return true;