X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/50ff97f378b76d177fef7162e31bb3fb71ef050c..0da99447d3e88e83f9977501bee56af5c7aa56c0:/LUFA/Drivers/USB/Class/Host/HIDClassHost.h

diff --git a/LUFA/Drivers/USB/Class/Host/HIDClassHost.h b/LUFA/Drivers/USB/Class/Host/HIDClassHost.h
index 2e88679f2..21868d9cf 100644
--- a/LUFA/Drivers/USB/Class/Host/HIDClassHost.h
+++ b/LUFA/Drivers/USB/Class/Host/HIDClassHost.h
@@ -83,11 +83,8 @@
 			{
 				struct
 				{
-					uint8_t  DataINPipeNumber; /**< Pipe number of the HID interface's IN data pipe. */
-					bool     DataINPipeDoubleBank; /**< Indicates if the HID interface's IN data pipe should use double banking. */
-
-					uint8_t  DataOUTPipeNumber; /**< Pipe number of the HID interface's OUT data pipe. */
-					bool     DataOUTPipeDoubleBank; /**< Indicates if the HID interface's OUT data pipe should use double banking. */
+					USB_Pipe_Table_t DataINPipe; /**< Data IN Pipe configuration table. */
+					USB_Pipe_Table_t DataOUTPipe; /**< Data OUT Pipe configuration table. */
 
 					uint8_t  HIDInterfaceProtocol; /**< HID interface protocol value to match against if a specific
 					                                *   boot subclass protocol is required, a protocol value from the
@@ -112,9 +109,6 @@
 					                */
 					uint8_t InterfaceNumber; /**< Interface index of the HID interface within the attached device. */
 
-					uint16_t DataINPipeSize; /**< Size in bytes of the HID interface's IN data pipe. */
-					uint16_t DataOUTPipeSize;  /**< Size in bytes of the HID interface's OUT data pipe. */
-
 					bool SupportsBootProtocol; /**< Indicates if the current interface instance supports the HID Boot
 					                            *   Protocol when enabled via \ref HID_Host_SetBootProtocol().
 					                            */
@@ -148,8 +142,8 @@
 			 *  device. This should be called once after the stack has enumerated the attached device, while the host state
 			 *  machine is in the Addressed state.
 			 *
-			 *  \note Once the device pipes are configured, the HID device's reporting protocol <b>must</b> be set via a call
-			 *        to either the \ref HID_Host_SetBootProtocol() or \ref HID_Host_SetReportProtocol() function.
+			 *  \attention Once the device pipes are configured, the HID device's reporting protocol <b>must</b> be set via a call
+			 *             to either the \ref HID_Host_SetBootProtocol() or \ref HID_Host_SetReportProtocol() function.
 			 *
 			 *  \param[in,out] HIDInterfaceInfo      Pointer to a structure containing a HID Class host configuration and state.
 			 *  \param[in]     ConfigDescriptorSize  Length of the attached device's Configuration Descriptor.
@@ -167,8 +161,8 @@
 			 *  \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
 			 *       call will fail.
 			 *
-			 *  \note The destination buffer should be large enough to accommodate the largest report that the attached device
-			 *        can generate.
+			 *  \attention The destination buffer should be large enough to accommodate the largest report that the attached device
+			 *             can generate.
 			 *
 			 *  \param[in,out] HIDInterfaceInfo  Pointer to a structure containing a HID Class host configuration and state.
 			 *  \param[in]     Buffer            Buffer to store the received report into.
@@ -252,7 +246,7 @@
 			uint8_t HID_Host_SetBootProtocol(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
 
 			/** Sets the idle period for the attached HID device to the specified interval. The HID idle period determines the rate
-			 *  at which the device should send a report, when no state changes have ocurred; i.e. on HID keyboards, this sets the
+			 *  at which the device should send a report, when no state changes have occurred; i.e. on HID keyboards, this sets the
 			 *  hardware key repeat interval.
 			 *
 			 *  \param[in,out] HIDInterfaceInfo  Pointer to a structure containing a HID Class host configuration and state.
@@ -267,9 +261,8 @@
 			/** Switches the attached HID device's reporting protocol over to the standard Report protocol mode. This also retrieves
 			 *  and parses the device's HID report descriptor, so that the size of each report can be determined in advance.
 			 *
-			 *  \note Whether this function is used or not, the \ref CALLBACK_HIDParser_FilterHIDReportItem() callback from the HID
-			 *        Report Parser this function references <b>must</b> be implemented in the user code.
-			 *        \n\n
+			 *  \attention Whether this function is used or not, the \ref CALLBACK_HIDParser_FilterHIDReportItem() callback from the HID
+			 *             Report Parser this function references <b>must</b> be implemented in the user code.
 			 *
 			 *  \note When the \c HID_HOST_BOOT_PROTOCOL_ONLY compile time token is defined, this method is unavailable.
 			 *