X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/4dece08bef10a23a9702b6ddb67401400119cbce..ec537fd84d6ad3fd0dfa1b55efa2c2d554c1db48:/Bootloaders/CDC/BootloaderCDC.txt

diff --git a/Bootloaders/CDC/BootloaderCDC.txt b/Bootloaders/CDC/BootloaderCDC.txt
index dc0358c7c..1eac72ff2 100644
--- a/Bootloaders/CDC/BootloaderCDC.txt
+++ b/Bootloaders/CDC/BootloaderCDC.txt
@@ -3,7 +3,7 @@
  *  This file contains special DoxyGen information for the generation of the main page and other special
  *  documentation pages. It is not a project source file.
  */
- 
+
 /** \mainpage CDC Class USB AVR Bootloader
  *
  *  \section SSec_Compat Demo Compatibility:
@@ -13,7 +13,7 @@
  *  - Series 7 USB AVRs (AT90USBxxx7)
  *  - Series 6 USB AVRs (AT90USBxxx6)
  *  - Series 4 USB AVRs (ATMEGAxxU4)
- *  - Series 2 USB AVRs (AT90USBxx6, ATMEGAxxU2)
+ *  - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
  *
  *  \section SSec_Info USB Information:
  *
@@ -28,7 +28,7 @@
  *    <td><b>USB Class:</b></td>
  *    <td>Communications Device Class (CDC)</td>
  *   </tr>
- *   <tr> 
+ *   <tr>
  *    <td><b>USB Subclass:</b></td>
  *    <td>Abstract Control Model (ACM)</td>
  *   </tr>
@@ -42,15 +42,15 @@
  *   </tr>
  *  </table>
  *
- *  \section SSec_Description Project Description: 
+ *  \section SSec_Description Project Description:
  *
  *  This bootloader enumerates to the host as a CDC Class device (virtual serial port), allowing for AVR109
- *  protocol compatible programming software to load firmware onto the AVR.	
- *  
+ *  protocol compatible programming software to load firmware onto the AVR.
+ *
  *  Out of the box this bootloader builds for the USB1287, and will fit into 4KB of bootloader space. If
  *  you wish to enlarge this space and/or change the AVR model, you will need to edit the BOOT_START and MCU
  *  values in the accompanying makefile.
- *  
+ *
  *  This bootloader is compatible with the open source application AVRDUDE, or Atmel's AVRPROG.
  *
  *  After running this bootloader for the first time on a new computer, you will need to supply the .INF
@@ -64,9 +64,28 @@
  *
  *  <table>
  *   <tr>
- *    <td>
- *     None
- *    </td>
+ *    <td>NO_BLOCK_SUPPORT</td>
+ *    <td>Makefile LUFA_OPTS</td>
+ *    <td>Define to disable memory block read/write support in the bootloader, requiring all reads and writes to be made
+ *        using the byte-level commands.
+ *   </tr>
+ *   <tr>
+ *    <td>NO_EEPROM_BYTE_SUPPORT</td>
+ *    <td>Makefile LUFA_OPTS</td>
+ *    <td>Define to disable EEPROM memory byte read/write support in the bootloader, requiring all EEPROM reads and writes
+ *        to be made using the block-level commands.
+ *   </tr>
+ *   <tr>
+ *    <td>NO_FLASH_BYTE_SUPPORT</td>
+ *    <td>Makefile LUFA_OPTS</td>
+ *    <td>Define to disable FLASH memory byte read/write support in the bootloader, requiring all FLASH reads and writes
+ *        to be made using the block-level commands.
+ *   </tr>
+ *   <tr>
+ *    <td>NO_LOCK_BYTE_WRITE_SUPPORT</td>
+ *    <td>Makefile LUFA_OPTS</td>
+ *    <td>Define to disable lock byte write support in the bootloader, preventing the lock bits from being set progmatically.
  *   </tr>
  *  </table>
  */
+