X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/41babf1cb78a2a8e05f40f5de61c3f52bb794fc4..1e3513ed70565daf100aa2a3425b3912dea4d2c8:/Demos/Device/LowLevel/AudioInput/Descriptors.h diff --git a/Demos/Device/LowLevel/AudioInput/Descriptors.h b/Demos/Device/LowLevel/AudioInput/Descriptors.h index 3a3174b9b..cda03c0c7 100644 --- a/Demos/Device/LowLevel/AudioInput/Descriptors.h +++ b/Demos/Device/LowLevel/AudioInput/Descriptors.h @@ -125,7 +125,7 @@ * * \param[in] freq Required audio sampling frequency in HZ */ - #define SAMPLE_FREQ(freq) {LowWord: ((uint32_t)freq & 0x00FFFF), HighByte: (((uint32_t)freq >> 16) & 0x0000FF)} + #define SAMPLE_FREQ(freq) {LowWord: ((uint32_t)(freq) & 0x00FFFF), HighByte: (((uint32_t)(freq) >> 16) & 0x0000FF)} /** Mask for the attributes parameter of an Audio class specific Endpoint descriptor, indicating that the endpoint * accepts only filled endpoint packets of audio samples. @@ -138,7 +138,7 @@ #define EP_ACCEPTS_SMALL_PACKETS (0 << 7) /** Endpoint number of the Audio isochronous streaming data endpoint. */ - #define AUDIO_STREAM_EPNUM 1 + #define AUDIO_STREAM_EPNUM 1 /** Endpoint size in bytes of the Audio isochronous streaming data endpoint. The Windows audio stack requires * at least 192 bytes for correct output, thus the smaller 128 byte maximum endpoint size on some of the smaller @@ -274,7 +274,7 @@ USB_Descriptor_Endpoint_t Endpoint; /**< Standard endpoint descriptor describing the audio endpoint */ uint8_t Refresh; /**< Always set to zero */ - uint8_t SyncEndpointNumber; /**< Endpoint address to send synchronisation information to, if needed (zero otherwise) */ + uint8_t SyncEndpointNumber; /**< Endpoint address to send synchronization information to, if needed (zero otherwise) */ } USB_Audio_StreamEndpoint_Std_t; /** Type define for an Audio class specific extended endpoint descriptor. This contains extra information