X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/41810f6e9e60ba3291d7d9838b9d54adad999f88..fd524b0e005ef3afc9de906fbb7a0b6edd89156f:/Projects/AVRISP-MKII/AVRISP-MKII.txt

diff --git a/Projects/AVRISP-MKII/AVRISP-MKII.txt b/Projects/AVRISP-MKII/AVRISP-MKII.txt
index ad36e7279..d3d568072 100644
--- a/Projects/AVRISP-MKII/AVRISP-MKII.txt
+++ b/Projects/AVRISP-MKII/AVRISP-MKII.txt
@@ -87,19 +87,34 @@
  *  with your compiled copy of AVRDude, or create them using the libUSB-Win32 (http://sourceforge.net/projects/libusb-win32)
  *  project.
  *
- *  For convenience, the programmer will report two different serial numbers depending on the firmware compatibity mode, so
+ *  For convenience, the programmer will report two different serial numbers depending on the firmware compatibility mode, so
  *  that the correct driver can be installed for the matching firmware. If the \c RESET_TOGGLES_LIBUSB_COMPAT compile option
  *  is used (see \ref Sec_Options) this allows for an easy way to automatically switch device drivers along with the firmware
- *  compatibility mode.
+ *  compatibility mode. The serials are:
+ *
+ *  <table>
+ *   <tr>
+ *    <th><b>Serial Number:</b></th>
+ *    <th><b>Compatibility Mode:</b></th>
+ *   </tr>
+ *   <tr>
+ *    <td>000200012345</td>
+ *    <td>Jungo (Atmel Studio) Compatibility</td>
+ *   </tr>
+ *   <tr>
+ *    <td>000200112345</td>
+ *    <td>libUSB Compatibility</td>
+ *   </tr>
+ *  </table>
  *
  *  \section Sec_ISP ISP Connections
  *  Connections to the device for SPI programming (when enabled):
  *
  *  <table>
  *   <tr>
- *    <td><b>Programmer Pin:</b></td>
- *    <td><b>Target Device Pin:</b></td>
- *    <td><b>ISP 6 Pin Layout:</b></td>
+ *    <th><b>Programmer Pin:</b></th>
+ *    <th><b>Target Device Pin:</b></th>
+ *    <th><b>ISP 6 Pin Layout:</b></th>
  *   </tr>
  *   <tr>
  *    <td>MISO</td>
@@ -145,9 +160,9 @@
  *
  *  <table>
  *   <tr>
- *    <td><b>Programmer Pin:</b></td>
- *    <td><b>Target Device Pin:</b></td>
- *    <td><b>PDI 6 Pin Layout:</b></td>
+ *    <th><b>Programmer Pin:</b></th>
+ *    <th><b>Target Device Pin:</b></th>
+ *    <th><b>PDI 6 Pin Layout:</b></th>
  *   </tr>
  *   <tr>
  *    <td>Tx/Rx <b><sup>2</sup></b></td>
@@ -189,9 +204,9 @@
  *
  *  <table>
  *   <tr>
- *    <td><b>Programmer Pin:</b></td>
- *    <td><b>Target Device Pin:</b></td>
- *    <td><b>TPI 6 Pin Layout:</b></td>
+ *    <th><b>Programmer Pin:</b></th>
+ *    <th><b>Target Device Pin:</b></th>
+ *    <th><b>TPI 6 Pin Layout:</b></th>
  *   </tr>
  *   <tr>
  *    <td>Tx/Rx <b><sup>2</sup></b></td>
@@ -235,9 +250,9 @@
  *
  *  <table>
  *   <tr>
- *    <td><b>Define Name:</b></td>
- *    <td><b>Location:</b></td>
- *    <td><b>Description:</b></td>
+ *    <th><b>Define Name:</b></th>
+ *    <th><b>Location:</b></th>
+ *    <th><b>Description:</b></th>
  *   </tr>
  *   <tr>
  *    <td>AUX_LINE_PORT</td>