X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/40fd566dbaa76b1b40677cc826da2e89af424aa2..a032d77d0e8009a3ef7e1666f144cde6f08f800e:/Projects/Webserver/Webserver.txt

diff --git a/Projects/Webserver/Webserver.txt b/Projects/Webserver/Webserver.txt
index 9b466d9d0..2ec836906 100644
--- a/Projects/Webserver/Webserver.txt
+++ b/Projects/Webserver/Webserver.txt
@@ -10,7 +10,7 @@
  *
  *  The following list indicates what microcontrollers are compatible with this project.
  *
- *  - Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
  *
  *  \section Sec_Info USB Information:
  *
@@ -40,7 +40,7 @@
  *        SCSI Block Commands Specification</td>
  *   </tr>
  *   <tr>
- *    <td><b>Usable Speeds:</b></td>
+ *    <td><b>Supported USB Speeds:</b></td>
  *    <td>Full Speed Mode</td>
  *   </tr>
  *  </table>
@@ -97,17 +97,17 @@
  *   </tr>
  *   <tr>
  *    <td>DEVICE_IP_ADDRESS</td>
- *    <td>Lib/uIPManagement.h</td>
+ *    <td>AppConfig.h</td>
  *    <td>IP address that the webserver should use when connected to a RNDIS device (when ENABLE_DHCP_CLIENT is not defined).</td>
  *   </tr>
  *   <tr>
  *    <td>DEVICE_NETMASK</td>
- *    <td>Lib/uIPManagement.h</td>
+ *    <td>AppConfig.h</td>
  *    <td>Netmask that the webserver should use when connected to a RNDIS device (when ENABLE_DHCP_CLIENT is not defined).</td>
  *   </tr>
  *   <tr>
  *    <td>DEVICE_GATEWAY</td>
- *    <td>Lib/uIPManagement.h</td>
+ *    <td>AppConfig.h</td>
  *    <td>Default routing gateway that the webserver should use when connected to a RNDIS device (when ENABLE_DHCP_CLIENT
  *        is not defined).</td>
  *   </tr>
@@ -116,6 +116,11 @@
  *    <td>AppConfig.h</td>
  *    <td>Maximum length of a URI for the Webserver. This is the maximum file path, including subdirectories and separators.</td>
  *   </tr>
+ *   <tr>
+ *    <td>SERVER_MAC_ADDRESS</td>
+ *    <td>AppConfig.h</td>
+ *    <td>MAC address of the server used when sending Ethernet packets onto the bus.</td>
+ *   </tr>
  *  </table>
  */