X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/3d4d8e7f628f9dc9981242f69b097333faa9940d..32f2d59bc0aec1e7c6b88301e3bd7a58ddc0c8c8:/LUFA/Drivers/Board/Dataflash.h diff --git a/LUFA/Drivers/Board/Dataflash.h b/LUFA/Drivers/Board/Dataflash.h index 06c1e62ac..c9f66054b 100644 --- a/LUFA/Drivers/Board/Dataflash.h +++ b/LUFA/Drivers/Board/Dataflash.h @@ -1,13 +1,13 @@ /* LUFA Library - Copyright (C) Dean Camera, 2011. + Copyright (C) Dean Camera, 2012. dean [at] fourwalledcubicle [dot] com www.lufa-lib.org */ /* - Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted @@ -30,9 +30,10 @@ /** \file * \brief Master include file for the board dataflash IC driver. + * \brief Atmel Dataflash storage IC board hardware driver. * - * This file is the master dispatch header file for the board-specific dataflash driver, for boards containing - * dataflash ICs for external non-volatile storage. + * This file is the master dispatch header file for the board-specific Atmel dataflash driver, for boards containing + * Atmel Dataflash ICs for external non-volatile storage. * * User code should include this file, which will in turn include the correct dataflash driver header file for * the currently selected board. @@ -45,6 +46,7 @@ /** \ingroup Group_BoardDrivers * \defgroup Group_Dataflash Dataflash Driver - LUFA/Drivers/Board/Dataflash.h + * \brief Atmel Dataflash storage IC board hardware driver. * * \section Sec_Dependencies Module Source Dependencies * The following files must be built with any user project that uses this module: @@ -64,48 +66,48 @@ * application. * * \code - * // Initialise the SPI and board Dataflash drivers before first use + * // Initialize the SPI and board Dataflash drivers before first use * SPI_Init(SPI_SPEED_FCPU_DIV_2 | SPI_ORDER_MSB_FIRST | SPI_SCK_LEAD_FALLING | * SPI_SAMPLE_TRAILING | SPI_MODE_MASTER); * Dataflash_Init(); - * + * * uint8_t WriteBuffer[DATAFLASH_PAGE_SIZE]; * uint8_t ReadBuffer[DATAFLASH_PAGE_SIZE]; - * + * * // Fill page write buffer with a repeating pattern * for (uint16_t i = 0; i < DATAFLASH_PAGE_SIZE; i++) * WriteBuffer[i] = (i & 0xFF); - * + * * // Must select the chip of interest first before operating on it * Dataflash_SelectChip(DATAFLASH_CHIP1); - * + * * // Write to the Dataflash's first internal memory buffer * printf("Writing data to first dataflash buffer:\r\n"); * Dataflash_SendByte(DF_CMD_BUFF1WRITE); * Dataflash_SendAddressBytes(0, 0); - * + * * for (uint16_t i = 0; i < DATAFLASH_PAGE_SIZE; i++) * Dataflash_SendByte(WriteBuffer[i]); - * + * * // Commit the Dataflash's first memory buffer to the non-volatile FLASH memory * printf("Committing page to non-volatile memory page index 5:\r\n"); * Dataflash_SendByte(DF_CMD_BUFF1TOMAINMEMWITHERASE); * Dataflash_SendAddressBytes(5, 0); * Dataflash_WaitWhileBusy(); - * + * * // Read the page from non-volatile FLASH memory into the Dataflash's second memory buffer * printf("Reading data into second dataflash buffer:\r\n"); * Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF2); * Dataflash_SendAddressBytes(5, 0); * Dataflash_WaitWhileBusy(); - * + * * // Read the Dataflash's second internal memory buffer * Dataflash_SendByte(DF_CMD_BUFF2READ); * Dataflash_SendAddressBytes(0, 0); - * + * * for (uint16_t i = 0; i < DATAFLASH_PAGE_SIZE; i++) * ReadBuffer[i] = Dataflash_ReceiveByte(); - * + * * // Deselect the chip after use * Dataflash_DeselectChip(); * \endcode @@ -117,14 +119,10 @@ #define __DATAFLASH_H__ /* Macros: */ - #if !defined(__DOXYGEN__) #define __INCLUDE_FROM_DATAFLASH_H - #define INCLUDE_FROM_DATAFLASH_H - #endif /* Includes: */ - #include "../../Common/Common.h" - #include "../Peripheral/SPI.h" + #include "../../Common/Common.h" /* Enable C linkage for C++ Compilers: */ #if defined(__cplusplus) @@ -147,9 +145,11 @@ #define DATAFLASH_CHIP_MASK(index) __GET_DATAFLASH_MASK(index) /* Inline Functions: */ - /** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC. + /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC. * - * \note The AVR's SPI driver must be initialized before any of the dataflash commands are used. + * \note The microcontroller's physical interface driver connected to the Dataflash IC must be initialized before + * any of the dataflash commands are used. This is usually a SPI hardware port, but on some devices/boards may + * be a USART operating in SPI Master mode. */ static inline void Dataflash_Init(void); @@ -177,7 +177,7 @@ * are deselected. * * \param[in] PageAddress Address of the page to manipulate, ranging from - * ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1). + * 0 to ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1). */ static inline void Dataflash_SelectChipFromPage(const uint16_t PageAddress); @@ -192,7 +192,7 @@ static inline void Dataflash_WaitWhileBusy(void); /** Sends a set of page and buffer address bytes to the currently selected dataflash IC, for use with - * dataflash commands which require a complete 24-byte address. + * dataflash commands which require a complete 24-bit address. * * \param[in] PageAddress Page address within the selected dataflash IC * \param[in] BufferByte Address within the dataflash's buffer @@ -202,51 +202,41 @@ /** Sends a byte to the currently selected dataflash IC, and returns a byte from the dataflash. * - * \param[in] Byte of data to send to the dataflash + * \param[in] Byte Byte of data to send to the dataflash * * \return Last response byte from the dataflash */ static inline uint8_t Dataflash_TransferByte(const uint8_t Byte) ATTR_ALWAYS_INLINE; - static inline uint8_t Dataflash_TransferByte(const uint8_t Byte) - { - return SPI_TransferByte(Byte); - } /** Sends a byte to the currently selected dataflash IC, and ignores the next byte from the dataflash. * - * \param[in] Byte of data to send to the dataflash + * \param[in] Byte Byte of data to send to the dataflash */ static inline void Dataflash_SendByte(const uint8_t Byte) ATTR_ALWAYS_INLINE; - static inline void Dataflash_SendByte(const uint8_t Byte) - { - SPI_SendByte(Byte); - } /** Sends a dummy byte to the currently selected dataflash IC, and returns the next byte from the dataflash. * * \return Last response byte from the dataflash */ static inline uint8_t Dataflash_ReceiveByte(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT; - static inline uint8_t Dataflash_ReceiveByte(void) - { - return SPI_ReceiveByte(); - } /* Includes: */ #if (BOARD == BOARD_NONE) #error The Board Dataflash driver cannot be used if the makefile BOARD option is not set. #elif (BOARD == BOARD_USBKEY) - #include "USBKEY/Dataflash.h" + #include "AVR8/USBKEY/Dataflash.h" #elif (BOARD == BOARD_STK525) - #include "STK525/Dataflash.h" + #include "AVR8/STK525/Dataflash.h" #elif (BOARD == BOARD_STK526) - #include "STK526/Dataflash.h" - #elif (BOARD == BOARD_XPLAIN) - #include "XPLAIN/Dataflash.h" - #elif (BOARD == BOARD_XPLAIN_REV1) - #include "XPLAIN/Dataflash.h" + #include "AVR8/STK526/Dataflash.h" + #elif ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1)) + #include "AVR8/XPLAIN/Dataflash.h" #elif (BOARD == BOARD_EVK527) - #include "EVK527/Dataflash.h" + #include "AVR8/EVK527/Dataflash.h" + #elif (BOARD == BOARD_A3BU_XPLAINED) + #include "XMEGA/A3BU_XPLAINED/Dataflash.h" + #elif (BOARD == BOARD_B1_XPLAINED) + #include "XMEGA/B1_XPLAINED/Dataflash.h" #else #include "Board/Dataflash.h" #endif